CommandStation-EX/mySetup_h_cmri.txt

// mySetup.h
// defining CMRI accessories
// CMRI connections defined in myHal.cpp
//
//  update 04-May-2024
//                Note: Accessories can be defined in myCMRI.h/myAutomation.h
//                      along with the CMRI bus and node definitions (previously in myHal.cpp).
//                      An ESP32 command station will need the Serial2 defined in myHal.cpp
//
//
//
// this is for testing.
SETUP("<D CMD 1>");
//  Turnouts defined in myAutomation.h can include descriptions which will appear in Engine Driver
//  Sensors and digital outputs do not require pre-definition for use in EXRAIL automation
//
// SMINI emulation node 24-input/48-outputs
// the sketch I use
// 16 or 24 input pins
// 32 or 48 output pins 
//
// Define 16 input pins 1000-1015
SETUP("<S 1000 1000 1>");
SETUP("<S 1001 1001 1>");
SETUP("<S 1002 1002 1>");
SETUP("<S 1003 1003 1>");
SETUP("<S 1004 1004 1>");
SETUP("<S 1005 1005 1>");
SETUP("<S 1006 1006 1>");
SETUP("<S 1007 1007 1>");
SETUP("<S 1008 1008 1>");
SETUP("<S 1009 1009 1>");
SETUP("<S 1010 1010 1>");
SETUP("<S 1011 1011 1>");
SETUP("<S 1012 1012 1>");
SETUP("<S 1013 1013 1>");
SETUP("<S 1014 1014 1>");
SETUP("<S 1015 1015 1>");
//
//  define 16 turnouts using VPIN (for Throw/Close commands via CMRI)
SETUP("<T 1024 VPIN 1024>");
SETUP("<T 1025 VPIN 1025>");
SETUP("<T 1026 VPIN 1026>");
SETUP("<T 1027 VPIN 1027>");
SETUP("<T 1028 VPIN 1028>");
SETUP("<T 1029 VPIN 1029>");
SETUP("<T 1030 VPIN 1030>");
SETUP("<T 1031 VPIN 1031>");
SETUP("<T 1032 VPIN 1032>");
SETUP("<T 1033 VPIN 1033>");
SETUP("<T 1034 VPIN 1034>");
SETUP("<T 1035 VPIN 1035>");
SETUP("<T 1036 VPIN 1036>");
SETUP("<T 1037 VPIN 1037>");
SETUP("<T 1038 VPIN 1038>");
SETUP("<T 1039 VPIN 1039>");
//
//  define 16 pins for digital outputs
SETUP("<Z 1040 1040 0>");
SETUP("<Z 1041 1041 0>");
SETUP("<Z 1042 1042 0>");
SETUP("<Z 1043 1043 0>");
SETUP("<Z 1044 1044 0>");
SETUP("<Z 1045 1045 0>");
SETUP("<Z 1046 1046 0>");
SETUP("<Z 1047 1047 0>");
SETUP("<Z 1048 1048 0>");
SETUP("<Z 1049 1049 0>");
SETUP("<Z 1050 1050 0>");
SETUP("<Z 1051 1051 0>");
SETUP("<Z 1052 1052 0>");
SETUP("<Z 1053 1053 0>");
SETUP("<Z 1054 1054 0>");
SETUP("<Z 1055 1055 0>");
//
//  additional 16 outputs available 1056-1071
//SETUP("<Z 1056 1056 0>");
//
//  CMRI sketch used for testing available here
//  https://www.trainboard.com/highball/index.php?threads/24-in-48-out-card-for-jmri.116454/page-2#post-1141569
//

// Define 16 input pins 900-915
SETUP("<S 900 900 1>");
SETUP("<S 901 901 1>");
SETUP("<S 902 902 1>");
SETUP("<S 903 903 1>");
SETUP("<S 904 904 1>");
SETUP("<S 905 905 1>");
SETUP("<S 906 906 1>");
SETUP("<S 907 907 1>");
SETUP("<S 908 908 1>");
SETUP("<S 909 909 1>");
SETUP("<S 910 910 1>");
SETUP("<S 911 911 1>");
SETUP("<S 912 912 1>");
SETUP("<S 913 913 1>");
SETUP("<S 914 914 1>");
SETUP("<S 915 915 1>");
//
//  define 16 turnouts using VPIN (for Throw/Close commands via CMRI)
SETUP("<T 924 VPIN 924>");
SETUP("<T 925 VPIN 925>");
SETUP("<T 926 VPIN 926>");
SETUP("<T 927 VPIN 927>");
SETUP("<T 928 VPIN 928>");
SETUP("<T 929 VPIN 929>");
SETUP("<T 930 VPIN 930>");
SETUP("<T 931 VPIN 931>");
SETUP("<T 932 VPIN 932>");
SETUP("<T 933 VPIN 933>");
SETUP("<T 934 VPIN 934>");
SETUP("<T 935 VPIN 935>");
SETUP("<T 936 VPIN 936>");
SETUP("<T 937 VPIN 937>");
SETUP("<T 938 VPIN 938>");
SETUP("<T 939 VPIN 939>");
//
//  define 16 pins for digital outputs
SETUP("<Z 940 940 0>");
SETUP("<Z 941 941 0>");
SETUP("<Z 942 942 0>");
SETUP("<Z 943 943 0>");
SETUP("<Z 944 944 0>");
SETUP("<Z 945 945 0>");
SETUP("<Z 946 946 0>");
SETUP("<Z 947 947 0>");
SETUP("<Z 948 948 0>");
SETUP("<Z 949 949 0>");
SETUP("<Z 950 950 0>");
SETUP("<Z 951 951 0>");
SETUP("<Z 952 952 0>");
SETUP("<Z 953 953 0>");
SETUP("<Z 954 954 0>");
SETUP("<Z 955 955 0>");