mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-24 13:21:23 +01:00
146 lines
4.8 KiB
C++
146 lines
4.8 KiB
C++
|
/*
|
||
|
* © 2021, Chris Harlow & David Cutting. All rights reserved.
|
||
|
*
|
||
|
* This file is part of Asbelos DCC API
|
||
|
*
|
||
|
* This is free software: you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License as published by
|
||
|
* the Free Software Foundation, either version 3 of the License, or
|
||
|
* (at your option) any later version.
|
||
|
*
|
||
|
* It is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
||
|
*/
|
||
|
|
||
|
|
||
|
/* This timer class is used to manage the single timer required to handle the DCC waveform.
|
||
|
* All timer access comes through this class so that it can be compiled for
|
||
|
* various hardware CPU types.
|
||
|
*
|
||
|
* DCCEX works on a single timer interrupt at a regular 58uS interval.
|
||
|
* The DCCWaveform class generates the signals to the motor shield
|
||
|
* based on this timer.
|
||
|
*
|
||
|
* If the motor drivers are BOTH configured to use the correct 2 pins for the architecture,
|
||
|
* (see isPWMPin() function. )
|
||
|
* then this allows us to use a hardware driven pin switching arrangement which is
|
||
|
* achieved by setting the duty cycle of the NEXT clock interrupt to 0% or 100% depending on
|
||
|
* the required pin state. (see setPWM())
|
||
|
* This is more accurate than the software interrupt but at the expense of
|
||
|
* limiting the choice of available pins.
|
||
|
* Fortunately, a standard motor shield on a Mega uses pins that qualify for PWM...
|
||
|
* Other shields may be jumpered to PWM pins or run directly using the software interrupt.
|
||
|
*
|
||
|
* Because the PWM-based waveform is effectively set half a cycle after the software version,
|
||
|
* it is not acceptable to drive the two tracks on different methiods or it would cause
|
||
|
* problems for <1 JOIN> etc.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
#include "DCCTimer.h"
|
||
|
const int DCC_SIGNAL_TIME=58; // this is the 58uS DCC 1-bit waveform half-cycle
|
||
|
const long CLOCK_CYCLES=(F_CPU / 1000000 * DCC_SIGNAL_TIME) >>1;
|
||
|
|
||
|
INTERRUPT_CALLBACK interruptHandler=0;
|
||
|
|
||
|
#ifdef ARDUINO_ARCH_MEGAAVR
|
||
|
// Arduino unoWifi Rev2 and nanoEvery architectire
|
||
|
|
||
|
void DCCTimer::begin(INTERRUPT_CALLBACK callback) {
|
||
|
interruptHandler=callback;
|
||
|
noInterrupts();
|
||
|
ADC0.CTRLC = (ADC0.CTRLC & 0b00110000) | 0b01000011; // speed up analogRead sample time
|
||
|
TCB0.CTRLB = TCB_CNTMODE_INT_gc & ~TCB_CCMPEN_bm; // timer compare mode with output disabled
|
||
|
TCB0.CTRLA = TCB_CLKSEL_CLKDIV2_gc; // 8 MHz ~ 0.125 us
|
||
|
TCB0.CCMP = CLOCK_CYCLES -1; // 1 tick less for timer reset
|
||
|
TCB0.INTFLAGS = TCB_CAPT_bm; // clear interrupt request flag
|
||
|
TCB0.INTCTRL = TCB_CAPT_bm; // Enable the interrupt
|
||
|
TCB0.CNT = 0;
|
||
|
TCB0.CTRLA |= TCB_ENABLE_bm; // start
|
||
|
interrupts();
|
||
|
}
|
||
|
|
||
|
// ISR called by timer interrupt every 58uS
|
||
|
ISR(TCB0_INT_vect){
|
||
|
TCB0.INTFLAGS = TCB_CAPT_bm;
|
||
|
interruptHandler();
|
||
|
}
|
||
|
|
||
|
bool DCCTimer::isPWMPin(byte pin) {
|
||
|
return false; // TODO what are the relevant pins?
|
||
|
}
|
||
|
|
||
|
void DCCTimer::setPWM(byte pin, bool high) {
|
||
|
// TODO what are the relevant pins?
|
||
|
}
|
||
|
|
||
|
void DCCTimer::getSimulatedMacAddress(byte mac[6]) {
|
||
|
memcpy(mac,(void *) &SIGROW.SERNUM0,6); // serial number
|
||
|
}
|
||
|
|
||
|
#else
|
||
|
// Arduino nano, uno, mega etc
|
||
|
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
|
#define TIMER1_A_PIN 11
|
||
|
#define TIMER1_B_PIN 12
|
||
|
#define TIMER1_C_PIN 13
|
||
|
#else
|
||
|
#define TIMER1_A_PIN 9
|
||
|
#define TIMER1_B_PIN 10
|
||
|
#endif
|
||
|
|
||
|
void DCCTimer::begin(INTERRUPT_CALLBACK callback) {
|
||
|
interruptHandler=callback;
|
||
|
noInterrupts();
|
||
|
ADCSRA = (ADCSRA & 0b11111000) | 0b00000100; // speed up analogRead sample time
|
||
|
TCCR1A = 0;
|
||
|
ICR1 = CLOCK_CYCLES;
|
||
|
TCNT1 = 0;
|
||
|
TCCR1B = _BV(WGM13) | _BV(CS10); // Mode 8, clock select 1
|
||
|
TIMSK1 = _BV(TOIE1); // Enable Software interrupt
|
||
|
interrupts();
|
||
|
}
|
||
|
|
||
|
// ISR called by timer interrupt every 58uS
|
||
|
ISR(TIMER1_OVF_vect){ interruptHandler(); }
|
||
|
|
||
|
// Alternative pin manipulation via PWM control.
|
||
|
bool DCCTimer::isPWMPin(byte pin) {
|
||
|
return pin==TIMER1_A_PIN
|
||
|
|| pin==TIMER1_B_PIN
|
||
|
#ifdef TIMER1_C_PIN
|
||
|
|| pin==TIMER1_C_PIN
|
||
|
#endif
|
||
|
;
|
||
|
}
|
||
|
|
||
|
void DCCTimer::setPWM(byte pin, bool high) {
|
||
|
if (pin==TIMER1_A_PIN) {
|
||
|
TCCR1A |= _BV(COM1A1);
|
||
|
OCR1A= high?1024:0;
|
||
|
}
|
||
|
else if (pin==TIMER1_B_PIN) {
|
||
|
TCCR1A |= _BV(COM1B1);
|
||
|
OCR1B= high?1024:0;
|
||
|
}
|
||
|
#ifdef TIMER1_C_PIN
|
||
|
else if (pin==TIMER1_C_PIN) {
|
||
|
TCCR1A |= _BV(COM1C1);
|
||
|
OCR1C= high?1024:0;
|
||
|
}
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
|
||
|
#include <avr/boot.h>
|
||
|
void DCCTimer::getSimulatedMacAddress(byte mac[6]) {
|
||
|
for (byte i=0; i<6; i++) mac[i]=boot_signature_byte_get(0x0E + i);
|
||
|
}
|
||
|
|
||
|
#endif
|