1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 21:21:24 +01:00
CommandStation-EX/EthernetInterface.h

108 lines
3.6 KiB
C
Raw Normal View History

/*
* © 2020,Gregor Baues, Chris Harlow. All rights reserved.
*
* This file is part of DCC-EX/CommandStation-EX
*
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*
* Ethernet Interface added by Gregor Baues
*/
#ifndef EthernetInterface_h
#define EthernetInterface_h
#include "DCCEXParser.h"
#include "MemStream.h"
#include <Arduino.h>
#include <avr/pgmspace.h>
#include <Ethernet.h>
/* some generated mac addresses as EthernetShields don't have one by default in HW.
* Sometimes they come on a sticker on the EthernetShield then use this address otherwise
* just choose one from below or generate one yourself. Only condition is that there is no
* other device on your network with the same Mac address.
*
* 52:b8:8a:8e:ce:21
* e3:e9:73:e1:db:0d
* 54:2b:13:52:ac:0c
* c2:d8:d4:7d:7c:cb
* 86:cf:fa:9f:07:79
*/
/**
* @brief Network Configuration
*
*/
#define MAC_ADDRESS { 0x52, 0xB8, 0x8A, 0x8E, 0xCE, 0x21 } // MAC address of your networking card found on the sticker on your card or take one from above
#define IP_ADDRESS 10, 0, 0, 101 // Just in case we don't get an adress from DHCP try a static one; make sure
// this one is not used elsewhere and corresponds to your network layout
#define LISTEN_PORT 3366 // default listen port for the server
#define MAX_ETH_BUFFER 250
typedef void (*HTTP_CALLBACK)(Print * stream, byte * cmd);
enum protocolType {
TCP,
UDP
};
typedef void (*protocolCallback)();
class EthernetInterface {
private:
EthernetServer server;
public:
DCCEXParser ethParser;
bool connected;
byte mac[6];
IPAddress ip;
uint16_t port;
IPAddress dnsip;
void setup(protocolType pt, uint16_t lp); // specific port nummber
void setup(protocolType pt); // uses default port number
void setup(); // all defaults (protocol/port)
protocolCallback protocolHandler;
void loop();
private:
static EthernetInterface * singleton;
char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; // buffer to hold incoming UDP packet,
uint8_t buffer[MAX_ETH_BUFFER]; // buffer provided to the streamer to be filled with the reply (used by TCP also for the recv)
MemStream * streamer; // streamer who writes the results to the buffer
EthernetClient clients[MAX_SOCK_NUM]; // accept up to MAX_SOCK_NUM client connections at the same time; This depends on the chipset used on the Shield
bool setupConnection();
static void udpHandler();
static void tcpHandler();
void udpHandler2();
void tcpHandler2();
EthernetUDP Udp;
EthernetServer getServer() {
return server;
};
void setServer(EthernetServer s) {
server = s;
};
};
#endif