CommandStation-EX/IO_EXIOExpander.h

/*
 *  © 2021, Peter Cole. All rights reserved.
 *
 *  This file is part of EX-CommandStation
 *
 *  This is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  It is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
*/

/*
* The IO_EX-IOExpander.h device driver integrates with one or more EX-IOExpander devices.
* This device driver will configure the device and all I/O ports on startup, along with
* interacting with the device for all input/output duties.
*
* To create EX-IOExpander devices, these are defined in myHal.cpp:
*
* #include "IO_EX-IOExpander.h"
*
* void halSetup() {
*   // EXIOExpander::create(vpin, num_vpins, i2c_address, digital_pinmap, analogue_pinmap);
*   EXIOExpander::create(800, 18, 0x90, DEFAULT_NANO_DIGITAL_PINMAP, DEFAULT_NANO_ANALOGUE_PINMAP);
}
*/

#ifndef IO_EX_IOEXPANDER_H
#define IO_EX_IOEXPANDER_H

#include "IO_GPIOBase.h"
#include "FSH.h"
#include "EX-IOExpanderPinMaps.h"

// Include user defined pin maps in myEX-IOExpander if defined
#if __has_include ("myEX-IOExpander.h")
  #include "myEX-IOExpander.h"
#endif

/////////////////////////////////////////////////////////////////////////////////////////////////////
/*
 * EXIODigitalPinMap class for EX-IOExpander.
 */
class EXIODigitalPinMap {
  public:
    EXIODigitalPinMap(uint8_t numDigitalPins, uint8_t...);
    EXIODigitalPinMap() = default;

  private:
    EXIODigitalPinMap(uint8_t numDigitalPins, ...) {
      _numDigitalPins = numDigitalPins;
      uint8_t _digitalPinMap[_numDigitalPins];
      va_list _pinList;
      va_start(_pinList, _numDigitalPins);
      for (uint8_t pin = 0; pin < _numDigitalPins; pin++) {
        _digitalPinMap[pin] = va_arg(_pinList, int);
      }
      va_end(_pinList);
    }

    uint8_t _numDigitalPins;
};

/////////////////////////////////////////////////////////////////////////////////////////////////////
/*
 * EXIOAnaloguePinMap class for EX-IOExpander.
 */
class EXIOAnaloguePinMap {
  public:
    EXIOAnaloguePinMap(uint8_t numAnaloguePins, ...);
    EXIOAnaloguePinMap() = default;
};

/////////////////////////////////////////////////////////////////////////////////////////////////////
/*
 * IODevice subclass for EX-IOExpander.
 */
class EXIOExpander : public IODevice {
public:
  static void create(VPIN vpin, int nPins, uint8_t i2cAddress, EXIODigitalPinMap digitalPinMap, EXIOAnaloguePinMap analoguePinMap) {
    if (checkNoOverlap(vpin, nPins, i2cAddress)) new EXIOExpander(vpin, nPins, i2cAddress, digitalPinMap, analoguePinMap);
  }

private:  
  // Constructor
  EXIOExpander(VPIN firstVpin, int nPins, uint8_t i2cAddress, EXIODigitalPinMap digitalPinMap, EXIOAnaloguePinMap analoguePinMap) {
    _firstVpin = firstVpin;
    _nPins = nPins;
    _i2cAddress = i2cAddress;
    _digitalPinMap = digitalPinMap;
    _analoguePinMap = analoguePinMap;
    addDevice(this);
  }

  void _begin() {
    // Initialise EX-IOExander device
    if (I2CManager.exists(_i2cAddress)) {
#ifdef DIAG_IO
      _display();
#endif
    } else {
      DIAG(F("EX-IOExpander device not found, I2C:%x"), _i2cAddress);
      _deviceState = DEVSTATE_FAILED;
    }
  }

  void _display() override {
    DIAG(F("EX-IOExpander I2C:x%x Configured on Vpins:%d-%d %S"), _i2cAddress, _firstVpin, _firstVpin+_nPins-1,
      _deviceState == DEVSTATE_FAILED ? F("OFFLINE") : F(""));
  }

  uint8_t _i2cAddress;
  EXIODigitalPinMap _digitalPinMap;
  EXIOAnaloguePinMap _analoguePinMap;

  enum {
    REG_EXIOINIT = 0x00,    // Flag to initialise setup procedure
    REG_EXIODPIN = 0x01,    // Flag we're sending digital pin assignments
    REG_EXIOAPIN = 0x02,    // Flag we're sending analogue pin assignments
    REG_EXIORDY = 0x03,     // Flag we have completed setup procedure, also for EX-IO to ACK setup
    REG_EXIODDIR = 0x04,    // Flag we're sending digital pin direction configuration
    REG_EXIODPUP = 0x05,    // Flag we're sending digital pin pullup configuration
  };
};

#endif