CommandStation-EX/DCCEXParser.cpp

/*
 *  © 2021 Neil McKechnie
 *  © 2021 Mike S
 *  © 2021 Herb Morton
 *  © 2020-2022 Harald Barth
 *  © 2020-2021 M Steve Todd
 *  © 2020-2021 Fred Decker
 *  © 2020-2021 Chris Harlow
 *  All rights reserved.
 *  
 *  This file is part of CommandStation-EX
 *
 *  This is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  It is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
 */
#include "StringFormatter.h"
#include "DCCEXParser.h"
#include "DCC.h"
#include "DCCWaveform.h"
#include "Turnouts.h"
#include "Outputs.h"
#include "Sensors.h"
#include "freeMemory.h"
#include "GITHUB_SHA.h"
#include "version.h"
#include "defines.h"
#include "CommandDistributor.h"
#include "EEStore.h"
#include "DIAG.h"
#include <avr/wdt.h>

////////////////////////////////////////////////////////////////////////////////
//
// Figure out if we have enough memory for advanced features
//
#if defined(ARDUINO_AVR_UNO) || defined(ARDUINO_AVR_NANO)
// nope
#else
#define HAS_ENOUGH_MEMORY
#endif

// These keywords are used in the <1> command. The number is what you get if you use the keyword as a parameter.
// To discover new keyword numbers , use the <$ YOURKEYWORD> command
const int16_t HASH_KEYWORD_PROG = -29718;
const int16_t HASH_KEYWORD_MAIN = 11339;
const int16_t HASH_KEYWORD_JOIN = -30750;
const int16_t HASH_KEYWORD_CABS = -11981;
const int16_t HASH_KEYWORD_RAM = 25982;
const int16_t HASH_KEYWORD_CMD = 9962;
const int16_t HASH_KEYWORD_ACK = 3113;
const int16_t HASH_KEYWORD_ON = 2657;
const int16_t HASH_KEYWORD_DCC = 6436;
const int16_t HASH_KEYWORD_SLOW = -17209;
const int16_t HASH_KEYWORD_PROGBOOST = -6353;
#ifndef DISABLE_EEPROM
const int16_t HASH_KEYWORD_EEPROM = -7168;
#endif
const int16_t HASH_KEYWORD_LIMIT = 27413;
const int16_t HASH_KEYWORD_MAX = 16244;
const int16_t HASH_KEYWORD_MIN = 15978;
const int16_t HASH_KEYWORD_RESET = 26133;
const int16_t HASH_KEYWORD_RETRY = 25704;
const int16_t HASH_KEYWORD_SPEED28 = -17064;
const int16_t HASH_KEYWORD_SPEED128 = 25816;
const int16_t HASH_KEYWORD_SERVO=27709;
const int16_t HASH_KEYWORD_VPIN=-415;
const int16_t HASH_KEYWORD_C=67;
const int16_t HASH_KEYWORD_T=84;
const int16_t HASH_KEYWORD_LCN = 15137;
const int16_t HASH_KEYWORD_HAL = 10853;
const int16_t HASH_KEYWORD_SHOW = -21309;
const int16_t HASH_KEYWORD_ANIN = -10424;
const int16_t HASH_KEYWORD_ANOUT = -26399;
const int16_t HASH_KEYWORD_WIFI = -5583;
const int16_t HASH_KEYWORD_ETHERNET = -30767;
const int16_t HASH_KEYWORD_WIT = 31594;

int16_t DCCEXParser::stashP[MAX_COMMAND_PARAMS];
bool DCCEXParser::stashBusy;
Print *DCCEXParser::stashStream = NULL;
RingStream *DCCEXParser::stashRingStream = NULL;
byte DCCEXParser::stashTarget=0;

// This is a JMRI command parser, one instance per incoming stream
// It doesnt know how the string got here, nor how it gets back.
// It knows nothing about hardware or tracks... it just parses strings and
// calls the corresponding DCC api.
// Non-DCC things like turnouts, pins and sensors are handled in additional JMRI interface classes.


int16_t DCCEXParser::splitValues(int16_t result[MAX_COMMAND_PARAMS], const byte *cmd, bool usehex)
{
    byte state = 1;
    byte parameterCount = 0;
    int16_t runningValue = 0;
    const byte *remainingCmd = cmd + 1; // skips the opcode
    bool signNegative = false;

    // clear all parameters in case not enough found
    for (int16_t i = 0; i < MAX_COMMAND_PARAMS; i++)
        result[i] = 0;

    while (parameterCount < MAX_COMMAND_PARAMS)
    {
        byte hot = *remainingCmd;

        switch (state)
        {

        case 1: // skipping spaces before a param
            if (hot == ' ')
                break;
            if (hot == '\0' || hot == '>')
                return parameterCount;
            state = 2;
            continue;

        case 2: // checking sign
            signNegative = false;
            runningValue = 0;
            state = 3;
            if (hot != '-')
                continue;
            signNegative = true;
            break;
        case 3: // building a parameter
            if (hot >= '0' && hot <= '9')
            {
                runningValue = (usehex?16:10) * runningValue + (hot - '0');
                break;
            }
            if (hot >= 'a' && hot <= 'z') hot=hot-'a'+'A'; // uppercase a..z
            if (usehex && hot>='A' && hot<='F') {
                // treat A..F as hex not keyword
                runningValue = 16 * runningValue + (hot - 'A' + 10);
                break;
            }
            if (hot >= 'A' && hot <= 'Z')
            {
                // Since JMRI got modified to send keywords in some rare cases, we need this
                // Super Kluge to turn keywords into a hash value that can be recognised later
                runningValue = ((runningValue << 5) + runningValue) ^ hot;
                break;
            }
            result[parameterCount] = runningValue * (signNegative ? -1 : 1);
            parameterCount++;
            state = 1;
            continue;
        }
        remainingCmd++;
    }
    return parameterCount;
}

FILTER_CALLBACK DCCEXParser::filterCallback = 0;
FILTER_CALLBACK DCCEXParser::filterRMFTCallback = 0;
AT_COMMAND_CALLBACK DCCEXParser::atCommandCallback = 0;
void DCCEXParser::setFilter(FILTER_CALLBACK filter)
{
    filterCallback = filter;
}
void DCCEXParser::setRMFTFilter(FILTER_CALLBACK filter)
{
    filterRMFTCallback = filter;
}
void DCCEXParser::setAtCommandCallback(AT_COMMAND_CALLBACK callback)
{
    atCommandCallback = callback;
}

// Parse an F() string 
void DCCEXParser::parse(const FSH * cmd) {
      DIAG(F("SETUP(\"%S\")"),cmd);
      int size=strlen_P((char *)cmd)+1; 
      char buffer[size];
      strcpy_P(buffer,(char *)cmd);
      parse(&Serial,(byte *)buffer,NULL);
}

// See documentation on DCC class for info on this section

void DCCEXParser::parse(Print *stream, byte *com, RingStream * ringStream)
{
#ifndef DISABLE_EEPROM
    (void)EEPROM; // tell compiler not to warn this is unused
#endif
    if (Diag::CMD)
        DIAG(F("PARSING:%s"), com);
    int16_t p[MAX_COMMAND_PARAMS];
    while (com[0] == '<' || com[0] == ' ')
        com++; // strip off any number of < or spaces
    byte opcode = com[0];
    byte params = splitValues(p, com, opcode=='M' || opcode=='P');
    
    if (filterCallback)
        filterCallback(stream, opcode, params, p);
    if (filterRMFTCallback && opcode!='\0')
        filterRMFTCallback(stream, opcode, params, p);

    // Functions return from this switch if complete, break from switch implies error <X> to send
    switch (opcode)
    {
    case '\0':
        return; // filterCallback asked us to ignore
    case 't':   // THROTTLE <t [REGISTER] CAB SPEED DIRECTION>
    {
        int16_t cab;
        int16_t tspeed;
        int16_t direction;

        if (params == 4)
        { // <t REGISTER CAB SPEED DIRECTION>
            cab = p[1];
            tspeed = p[2];
            direction = p[3];
        }
        else if (params == 3)
        { // <t CAB SPEED DIRECTION>
            cab = p[0];
            tspeed = p[1];
            direction = p[2];
        }
        else
            break;

        // Convert DCC-EX protocol speed steps where
        // -1=emergency stop, 0-126 as speeds
        // to DCC 0=stop, 1= emergency stop, 2-127 speeds
        if (tspeed > 126 || tspeed < -1)
            break; // invalid JMRI speed code
        if (tspeed < 0)
            tspeed = 1; // emergency stop DCC speed
        else if (tspeed > 0)
            tspeed++; // map 1-126 -> 2-127
        if (cab == 0 && tspeed > 1)
            break; // ignore broadcasts of speed>1

        if (direction < 0 || direction > 1)
            break; // invalid direction code

        DCC::setThrottle(cab, tspeed, direction);
        if (params == 4) // send obsolete format T response
            StringFormatter::send(stream, F("<T %d %d %d>\n"), p[0], p[2], p[3]);
        // speed change will be broadcast anyway in new <l > format
        return;
    }
    case 'f': // FUNCTION <f CAB BYTE1 [BYTE2]>
        if (parsef(stream, params, p))
            return;
        break;

    case 'a': // ACCESSORY <a ADDRESS SUBADDRESS ACTIVATE> or <a LINEARADDRESS ACTIVATE>
        { 
          int address;
          byte subaddress;
          byte activep;
          if (params==2) { // <a LINEARADDRESS ACTIVATE>
              address=(p[0] - 1) / 4 + 1;
              subaddress=(p[0] - 1)  % 4;
              activep=1;        
          }
          else if (params==3) { // <a ADDRESS SUBADDRESS ACTIVATE>
              address=p[0];
              subaddress=p[1];
              activep=2;        
          }
          else break; // invalid no of parameters
          
          if (
             ((address & 0x01FF) != address)      // invalid address (limit 9 bits ) 
          || ((subaddress & 0x03) != subaddress)  // invalid subaddress (limit 2 bits ) 
          || ((p[activep]  & 0x01) != p[activep]) // invalid activate 0|1
          ) break; 
          // Honour the configuration option (config.h) which allows the <a> command to be reversed
#ifdef DCC_ACCESSORY_COMMAND_REVERSE
          DCC::setAccessory(address, subaddress,p[activep]==0);
#else
          DCC::setAccessory(address, subaddress,p[activep]==1);
#endif
        }
        return;
     
    case 'T': // TURNOUT  <T ...>
        if (parseT(stream, params, p))
            return;
        break;

    case 'Z': // OUTPUT <Z ...>
        if (parseZ(stream, params, p))
            return;
        break;

    case 'S': // SENSOR <S ...>
        if (parseS(stream, params, p))
            return;
        break;

    case 'w': // WRITE CV on MAIN <w CAB CV VALUE>
        DCC::writeCVByteMain(p[0], p[1], p[2]);
        return;

    case 'b': // WRITE CV BIT ON MAIN <b CAB CV BIT VALUE>
        DCC::writeCVBitMain(p[0], p[1], p[2], p[3]);
        return;

    case 'M': // WRITE TRANSPARENT DCC PACKET MAIN <M REG X1 ... X9>
    case 'P': // WRITE TRANSPARENT DCC PACKET PROG <P REG X1 ... X9>
        // NOTE: this command was parsed in HEX instead of decimal
        params--; // drop REG
        if (params<1) break;  
        {
          byte packet[params];
          for (int i=0;i<params;i++) {
            packet[i]=(byte)p[i+1];
            if (Diag::CMD) DIAG(F("packet[%d]=%d (0x%x)"), i, packet[i], packet[i]);
          }
          (opcode=='M'?DCCWaveform::mainTrack:DCCWaveform::progTrack).schedulePacket(packet,params,3);  
        }
        return;
        
    case 'W': // WRITE CV ON PROG <W CV VALUE CALLBACKNUM CALLBACKSUB>
            if (!stashCallback(stream, p, ringStream))
                break;
        if (params == 1) // <W id> Write new loco id (clearing consist and managing short/long)
            DCC::setLocoId(p[0],callback_Wloco);
        else // WRITE CV ON PROG <W CV VALUE [CALLBACKNUM] [CALLBACKSUB]>
            DCC::writeCVByte(p[0], p[1], callback_W);
        return;

    case 'V': // VERIFY CV ON PROG <V CV VALUE> <V CV BIT 0|1>
        if (params == 2)
        { // <V CV VALUE>
            if (!stashCallback(stream, p, ringStream))
                break;
            DCC::verifyCVByte(p[0], p[1], callback_Vbyte);
            return;
        }
        if (params == 3)
        {
            if (!stashCallback(stream, p, ringStream))
                break;
            DCC::verifyCVBit(p[0], p[1], p[2], callback_Vbit);
            return;
        }
        break;

    case 'B': // WRITE CV BIT ON PROG <B CV BIT VALUE CALLBACKNUM CALLBACKSUB>
        if (!stashCallback(stream, p, ringStream))
            break;
        DCC::writeCVBit(p[0], p[1], p[2], callback_B);
        return;

    case 'R': // READ CV ON PROG
        if (params == 3)
        { // <R CV CALLBACKNUM CALLBACKSUB>
            if (!stashCallback(stream, p, ringStream))
                break;
            DCC::readCV(p[0], callback_R);
            return;
        }
        if (params == 0)
        { // <R> New read loco id
            if (!stashCallback(stream, p, ringStream))
                break;
            DCC::getLocoId(callback_Rloco);
            return;
        }
        break;

    case '1': // POWERON <1   [MAIN|PROG|JOIN]>
        {
        bool main=false;
        bool prog=false;
        bool join=false;
        if (params > 1) break;
        if (params==0 || MotorDriver::commonFaultPin) { // <1> or tracks can not be handled individually
            main=true;
            prog=true;
        }
	if (params==1) {
	  if (p[0] == HASH_KEYWORD_JOIN) {  // <1 JOIN>
            main=true;
            prog=true;
            join=true;
	  }
	  else if (p[0]==HASH_KEYWORD_MAIN) { // <1 MAIN>
            main=true;
	  }
	  else if (p[0]==HASH_KEYWORD_PROG) { // <1 PROG>
            prog=true;
	  }
	  else break; // will reply <X>
	}
        if (main) DCCWaveform::mainTrack.setPowerMode(POWERMODE::ON);
        if (prog) DCCWaveform::progTrack.setPowerMode(POWERMODE::ON);
        DCC::setProgTrackSyncMain(join);

        CommandDistributor::broadcastPower();
        return;
        }

    case '0': // POWEROFF <0 [MAIN | PROG] >
        {
        bool main=false;
        bool prog=false;
        if (params > 1) break;
        if (params==0 || MotorDriver::commonFaultPin) { // <0> or tracks can not be handled individually
	  main=true;
	  prog=true;
        }
	if (params==1) {
	  if (p[0]==HASH_KEYWORD_MAIN) { // <0 MAIN>
	    main=true;
	  }
	  else if (p[0]==HASH_KEYWORD_PROG) { // <0 PROG>
	    prog=true;
	  }
	  else break; // will reply <X>
	}

        if (main) DCCWaveform::mainTrack.setPowerMode(POWERMODE::OFF);
        if (prog) {
            DCC::setProgTrackBoost(false);  // Prog track boost mode will not outlive prog track off
            DCCWaveform::progTrack.setPowerMode(POWERMODE::OFF);
        }
        DCC::setProgTrackSyncMain(false);

        CommandDistributor::broadcastPower();
        return;
        }

    case '!': // ESTOP ALL  <!>
        DCC::setThrottle(0,1,1); // this broadcasts speed 1(estop) and sets all reminders to speed 1.
        return;

    case 'c': // SEND METER RESPONSES <c>
        //                               <c MeterName value C/V unit min max res warn>
        StringFormatter::send(stream, F("<c CurrentMAIN %d C Milli 0 %d 1 %d>\n"), DCCWaveform::mainTrack.getCurrentmA(), 
            DCCWaveform::mainTrack.getMaxmA(), DCCWaveform::mainTrack.getTripmA());
        StringFormatter::send(stream, F("<a %d>\n"), DCCWaveform::mainTrack.get1024Current()); //'a' message deprecated, remove once JMRI 4.22 is available
        return;

    case 'Q': // SENSORS <Q>
        Sensor::printAll(stream);
        return;

    case 's': // <s>
        StringFormatter::send(stream, F("<p%d>\n"), DCCWaveform::mainTrack.getPowerMode() == POWERMODE::ON);
        StringFormatter::send(stream, F("<iDCC-EX V-%S / %S / %S G-%S>\n"), F(VERSION), F(ARDUINO_TYPE), DCC::getMotorShieldName(), F(GITHUB_SHA));
        Turnout::printAll(stream); //send all Turnout states
        Output::printAll(stream);  //send all Output  states
        Sensor::printAll(stream);  //send all Sensor  states
        // TODO Send stats of  speed reminders table
        return;       

#ifndef DISABLE_EEPROM
    case 'E': // STORE EPROM <E>
        EEStore::store();
        StringFormatter::send(stream, F("<e %d %d %d>\n"), EEStore::eeStore->data.nTurnouts, EEStore::eeStore->data.nSensors, EEStore::eeStore->data.nOutputs);
        return;

    case 'e': // CLEAR EPROM <e>
        EEStore::clear();
        StringFormatter::send(stream, F("<O>\n"));
        return;
#endif
    case ' ': // < >
        StringFormatter::send(stream, F("\n"));
        return;

    case 'D': // < >
        if (parseD(stream, params, p))
            return;
        return;

    case '#': // NUMBER OF LOCOSLOTS <#>
        StringFormatter::send(stream, F("<# %d>\n"), MAX_LOCOS);
        return;

    case '-': // Forget Loco <- [cab]>
        if (params > 1 || p[0]<0) break;
        if (p[0]==0) DCC::forgetAllLocos();
        else  DCC::forgetLoco(p[0]);
        return;

    case 'F': // New command to call the new Loco Function API <F cab func 1|0>
        if(params!=3) break; 
        if (Diag::CMD)
            DIAG(F("Setting loco %d F%d %S"), p[0], p[1], p[2] ? F("ON") : F("OFF"));
        DCC::setFn(p[0], p[1], p[2] == 1);
        return;

    case '+': // Complex Wifi interface command (not usual parse)
        if (atCommandCallback && !ringStream) {
          DCCWaveform::mainTrack.setPowerMode(POWERMODE::OFF);
          DCCWaveform::progTrack.setPowerMode(POWERMODE::OFF);
          atCommandCallback((HardwareSerial *)stream,com);
          return;
        }
        break;

    default: //anything else will diagnose and drop out to <X>
        DIAG(F("Opcode=%c params=%d"), opcode, params);
        for (int i = 0; i < params; i++)
            DIAG(F("p[%d]=%d (0x%x)"), i, p[i], p[i]);
        break;

    } // end of opcode switch

    // Any fallout here sends an <X>
    StringFormatter::send(stream, F("<X>\n"));
}

bool DCCEXParser::parseZ(Print *stream, int16_t params, int16_t p[])
{

    switch (params)
    {
    
    case 2: // <Z ID ACTIVATE>
    {
        Output *o = Output::get(p[0]);
        if (o == NULL)
            return false;
        o->activate(p[1]);
        StringFormatter::send(stream, F("<Y %d %d>\n"), p[0], p[1]);
    }
        return true;

    case 3: // <Z ID PIN IFLAG>
        if (p[0] < 0 || p[2] < 0 || p[2] > 7 )
	        return false;
        if (!Output::create(p[0], p[1], p[2], 1))
          return false;
        StringFormatter::send(stream, F("<O>\n"));
        return true;

    case 1: // <Z ID>
        if (!Output::remove(p[0]))
          return false;
        StringFormatter::send(stream, F("<O>\n"));
        return true;

    case 0: // <Z> list Output definitions
    {
        bool gotone = false;
        for (Output *tt = Output::firstOutput; tt != NULL; tt = tt->nextOutput)
        {
            gotone = true;
            StringFormatter::send(stream, F("<Y %d %d %d %d>\n"), tt->data.id, tt->data.pin, tt->data.flags, tt->data.active);
        }
        return gotone;
    }
    default:
        return false;
    }
}

//===================================
bool DCCEXParser::parsef(Print *stream, int16_t params, int16_t p[])
{
    // JMRI sends this info in DCC message format but it's not exactly
    //      convenient for other processing
    if (params == 2)
    {
        byte instructionField = p[1] & 0xE0;   // 1110 0000
        if (instructionField == 0x80)          // 1000 0000 Function group 1
        {
	    // Shuffle bits from order F0 F4 F3 F2 F1 to F4 F3 F2 F1 F0 
            byte normalized = (p[1] << 1 & 0x1e) | (p[1] >> 4 & 0x01);
            funcmap(p[0], normalized, 0, 4);
        }
        else if (instructionField == 0xA0)     // 1010 0000 Function group 2
        {
	    if (p[1] & 0x10)                   // 0001 0000 Bit selects F5toF8 / F9toF12
		funcmap(p[0], p[1], 5, 8);
	    else
		funcmap(p[0], p[1], 9, 12);
        }
    }
    if (params == 3)
    {
        if (p[1] == 222)
            funcmap(p[0], p[2], 13, 20);
        else if (p[1] == 223)
            funcmap(p[0], p[2], 21, 28);
    }
    (void)stream; // NO RESPONSE
    return true;
}

void DCCEXParser::funcmap(int16_t cab, byte value, byte fstart, byte fstop)
{
    for (int16_t i = fstart; i <= fstop; i++)
    {
        DCC::setFn(cab, i, value & 1);
        value >>= 1;
    }
}

//===================================
bool DCCEXParser::parseT(Print *stream, int16_t params, int16_t p[])
{
    switch (params)
    {
    case 0: // <T>  list turnout definitions
    {
        bool gotOne = false;
        for (Turnout *tt = Turnout::first(); tt != NULL; tt = tt->next())
        {
            gotOne = true;
            tt->print(stream);
        }
        return gotOne; // will <X> if none found
    }

    case 1: // <T id>  delete turnout
        if (!Turnout::remove(p[0]))
            return false;
        StringFormatter::send(stream, F("<O>\n"));
        return true;

    case 2: // <T id 0|1|T|C> 
        {
          bool state = false;
          switch (p[1]) {
            // Turnout messages use 1=throw, 0=close.
            case 0:
            case HASH_KEYWORD_C:
              state = true;
              break;
            case 1:
            case HASH_KEYWORD_T:
              state= false;
              break;
            default:
              return false;  // Invalid parameter
          }
          if (!Turnout::setClosed(p[0], state)) return false;


          return true;
        }

    default: // Anything else is some kind of turnout create function.
      if (params == 6 && p[1] == HASH_KEYWORD_SERVO) { // <T id SERVO n n n n>
        if (!ServoTurnout::create(p[0], (VPIN)p[2], (uint16_t)p[3], (uint16_t)p[4], (uint8_t)p[5]))
          return false;
      } else 
      if (params == 3 && p[1] == HASH_KEYWORD_VPIN) { // <T id VPIN n>
        if (!VpinTurnout::create(p[0], p[2])) return false;
      } else 
      if (params >= 3 && p[1] == HASH_KEYWORD_DCC) {
        // <T id DCC addr subadd>   0<=addr<=511, 0<=subadd<=3 (like <a> command).<T>
        if (params==4 && p[2]>=0 && p[2]<512 && p[3]>=0 && p[3]<4) { // <T id DCC n m>
          if (!DCCTurnout::create(p[0], p[2], p[3])) return false;
        } else if (params==3 && p[2]>0 && p[2]<=512*4) { // <T id DCC nn>, 1<=nn<=2048
          // Linearaddress 1 maps onto decoder address 1/0 (not 0/0!).
          if (!DCCTurnout::create(p[0], (p[2]-1)/4+1, (p[2]-1)%4)) return false;
        } else
          return false;
      } else 
      if (params==3) { // legacy <T id addr subadd> for DCC accessory
        if (p[1]>=0 && p[1]<512 && p[2]>=0 && p[2]<4) {
          if (!DCCTurnout::create(p[0], p[1], p[2])) return false;
        } else
          return false;
      } 
      else 
      if (params==4) { // legacy <T id n n n> for Servo
        if (!ServoTurnout::create(p[0], (VPIN)p[1], (uint16_t)p[2], (uint16_t)p[3], 1)) return false;
      } else
        return false;

      StringFormatter::send(stream, F("<O>\n"));
      return true;
    }
}

bool DCCEXParser::parseS(Print *stream, int16_t params, int16_t p[])
{

    switch (params)
    {
    case 3: // <S id pin pullup>  create sensor. pullUp indicator (0=LOW/1=HIGH)
        if (!Sensor::create(p[0], p[1], p[2]))
          return false;
        StringFormatter::send(stream, F("<O>\n"));
        return true;

    case 1: // S id> remove sensor
        if (!Sensor::remove(p[0]))
          return false;
        StringFormatter::send(stream, F("<O>\n"));
        return true;

    case 0: // <S> list sensor definitions
      if (Sensor::firstSensor == NULL)
        return false;
      for (Sensor *tt = Sensor::firstSensor; tt != NULL; tt = tt->nextSensor)
      {
          StringFormatter::send(stream, F("<Q %d %d %d>\n"), tt->data.snum, tt->data.pin, tt->data.pullUp);
      }
      return true;

    default: // invalid number of arguments
        break;
    }
    return false;
}

bool DCCEXParser::parseD(Print *stream, int16_t params, int16_t p[])
{
    if (params == 0)
        return false;
    bool onOff = (params > 0) && (p[1] == 1 || p[1] == HASH_KEYWORD_ON); // dont care if other stuff or missing... just means off
    switch (p[0])
    {
    case HASH_KEYWORD_CABS: // <D CABS>
        DCC::displayCabList(stream);
        return true;

    case HASH_KEYWORD_RAM: // <D RAM>
        StringFormatter::send(stream, F("Free memory=%d\n"), minimumFreeMemory());
        break;

    case HASH_KEYWORD_ACK: // <D ACK ON/OFF> <D ACK [LIMIT|MIN|MAX|RETRY] Value>
	if (params >= 3) {
	    if (p[1] == HASH_KEYWORD_LIMIT) {
	      DCCWaveform::progTrack.setAckLimit(p[2]);
	      LCD(1, F("Ack Limit=%dmA"), p[2]);  // <D ACK LIMIT 42>
	    } else if (p[1] == HASH_KEYWORD_MIN) {
	      DCCWaveform::progTrack.setMinAckPulseDuration(p[2]);
	      LCD(0, F("Ack Min=%uus"), p[2]);  //   <D ACK MIN 1500>
	    } else if (p[1] == HASH_KEYWORD_MAX) {
	      DCCWaveform::progTrack.setMaxAckPulseDuration(p[2]);
	      LCD(0, F("Ack Max=%uus"), p[2]);  //   <D ACK MAX 9000>
	    } else if (p[1] == HASH_KEYWORD_RETRY) {
	      if (p[2] >255) p[2]=3;
	      LCD(0, F("Ack Retry=%d Sum=%d"), p[2], DCC::setAckRetry(p[2]));  //   <D ACK RETRY 2>
	    }
	} else {
	  StringFormatter::send(stream, F("Ack diag %S\n"), onOff ? F("on") : F("off"));
	  Diag::ACK = onOff;
	}
        return true;

    case HASH_KEYWORD_CMD: // <D CMD ON/OFF>
        Diag::CMD = onOff;
        return true;

#ifdef HAS_ENOUGH_MEMORY
    case HASH_KEYWORD_WIFI: // <D WIFI ON/OFF>
        Diag::WIFI = onOff;
        return true;

    case HASH_KEYWORD_ETHERNET: // <D ETHERNET ON/OFF>
        Diag::ETHERNET = onOff;
        return true;

    case HASH_KEYWORD_WIT: // <D WIT ON/OFF>
        Diag::WITHROTTLE = onOff;
        return true;

    case HASH_KEYWORD_LCN: // <D LCN ON/OFF>
        Diag::LCN = onOff;
        return true;
#endif

    case HASH_KEYWORD_PROGBOOST:
        DCC::setProgTrackBoost(true);
	      return true;

    case HASH_KEYWORD_RESET:
        {
          wdt_enable( WDTO_15MS); // set Arduino watchdog timer for 15ms 
          delay(50);            // wait for the prescaller time to expire          
          break; // and <X> if we didnt restart 
        }

#ifndef DISABLE_EEPROM
    case HASH_KEYWORD_EEPROM: // <D EEPROM NumEntries>
	if (params >= 2)
	    EEStore::dump(p[1]);
	return true;
#endif

    case HASH_KEYWORD_SPEED28:
        DCC::setGlobalSpeedsteps(28);
	StringFormatter::send(stream, F("28 Speedsteps"));
        return true;

    case HASH_KEYWORD_SPEED128:
        DCC::setGlobalSpeedsteps(128);
	StringFormatter::send(stream, F("128 Speedsteps"));
        return true;

    case HASH_KEYWORD_SERVO:  // <D SERVO vpin position [profile]>
    case HASH_KEYWORD_ANOUT:  // <D ANOUT vpin position [profile]>
        IODevice::writeAnalogue(p[1], p[2], params>3 ? p[3] : 0);
        break;

    case HASH_KEYWORD_ANIN:   // <D ANIN vpin>  Display analogue input value
        DIAG(F("VPIN=%d value=%d"), p[1], IODevice::readAnalogue(p[1]));
        break;

#if !defined(IO_MINIMAL_HAL)
    case HASH_KEYWORD_HAL: 
        if (p[1] == HASH_KEYWORD_SHOW) 
          IODevice::DumpAll();
        break;
#endif

    default: // invalid/unknown
        break;
    }
    return false;
}

// CALLBACKS must be static
bool DCCEXParser::stashCallback(Print *stream, int16_t p[MAX_COMMAND_PARAMS], RingStream * ringStream)
{
    if (stashBusy )
        return false;
    stashBusy = true;
    stashStream = stream;
    stashRingStream=ringStream;
    if (ringStream) stashTarget= ringStream->peekTargetMark();
    memcpy(stashP, p, MAX_COMMAND_PARAMS * sizeof(p[0]));
    return true;
}

Print * DCCEXParser::getAsyncReplyStream() {
       if (stashRingStream) {
           stashRingStream->mark(stashTarget);
           return stashRingStream;
       }
       return stashStream;
}

void DCCEXParser::commitAsyncReplyStream() {
     if (stashRingStream) stashRingStream->commit();
     stashBusy = false;
}

void DCCEXParser::callback_W(int16_t result)
{
    StringFormatter::send(getAsyncReplyStream(),
          F("<r%d|%d|%d %d>\n"), stashP[2], stashP[3], stashP[0], result == 1 ? stashP[1] : -1);
    commitAsyncReplyStream();
}

void DCCEXParser::callback_B(int16_t result)
{
    StringFormatter::send(getAsyncReplyStream(), 
          F("<r%d|%d|%d %d %d>\n"), stashP[3], stashP[4], stashP[0], stashP[1], result == 1 ? stashP[2] : -1);
    commitAsyncReplyStream();
}
void DCCEXParser::callback_Vbit(int16_t result)
{
    StringFormatter::send(getAsyncReplyStream(), F("<v %d %d %d>\n"), stashP[0], stashP[1], result);
    commitAsyncReplyStream();
}
void DCCEXParser::callback_Vbyte(int16_t result)
{
    StringFormatter::send(getAsyncReplyStream(), F("<v %d %d>\n"), stashP[0], result);
    commitAsyncReplyStream();
}

void DCCEXParser::callback_R(int16_t result)
{
    StringFormatter::send(getAsyncReplyStream(), F("<r%d|%d|%d %d>\n"), stashP[1], stashP[2], stashP[0], result);
    commitAsyncReplyStream();
}

void DCCEXParser::callback_Rloco(int16_t result) {
  const FSH * detail;
  if (result<=0) {
    detail=F("<r ERROR %d>\n");
  } else {
    bool longAddr=result & LONG_ADDR_MARKER;        //long addr
    if (longAddr)
      result = result^LONG_ADDR_MARKER;
    if (longAddr && result <= HIGHEST_SHORT_ADDR)
      detail=F("<r LONG %d UNSUPPORTED>\n");
    else
      detail=F("<r %d>\n");
  }
  StringFormatter::send(getAsyncReplyStream(), detail, result);
  commitAsyncReplyStream();
}

void DCCEXParser::callback_Wloco(int16_t result)
{
    if (result==1) result=stashP[0]; // pick up original requested id from command
    StringFormatter::send(getAsyncReplyStream(), F("<w %d>\n"), result);
    commitAsyncReplyStream();
}