dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-27 01:56:14 +01:00
Code Releases Activity

Revert "Merge branch 'master' into devel_chris"

Browse Source 
This reverts commit 23845f2df2, reversing
changes made to 76755993f1.
This commit is contained in:
Asbelos 2024-04-12 15:07:31 +01:00
parent 23845f2df2
commit 132e2d0de2
3 changed files with 176 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
IO_EXIOExpander.h
View File

@ -23,13 +23,10 @@
* This device driver will configure the device on startup, along with * This device driver will configure the device on startup, along with
* interacting with the device for all input/output duties. * interacting with the device for all input/output duties.
* *
* To create EX-IOExpander devices, these are defined in myHal.cpp: * To create EX-IOExpander devices, these are defined in myAutomation.h:
* (Note the device driver is included by default) * (Note the device driver is included by default)
* *
* void halSetup() { * HAL(EXIOExpander,800,18,0x65)
* // EXIOExpander::create(vpin, num_vpins, i2c_address);
* EXIOExpander::create(800, 18, 0x65);
* }
* *
* All pins on an EX-IOExpander device are allocated according to the pin map for the specific * All pins on an EX-IOExpander device are allocated according to the pin map for the specific
* device in use. There is no way for the device driver to sanity check pins are used for the * device in use. There is no way for the device driver to sanity check pins are used for the
@ -114,6 +111,7 @@ private:
} }
} }
} }
if (_numAnaloguePins>0) { if (_numAnaloguePins>0) {
size_t analogueBytesNeeded = _numAnaloguePins * 2; size_t analogueBytesNeeded = _numAnaloguePins * 2;
if (_analoguePinBytes < analogueBytesNeeded) { if (_analoguePinBytes < analogueBytesNeeded) {

82
README.md
View File

@ -1,39 +1,77 @@
# What is DCC-EX? # What is DCC++ EX?
DCC-EX is a team of dedicated enthusiasts producing open source DCC & DC solutions for you to run your complete model railroad layout. Our easy to use, do-it-yourself, and free open source products run on off-the-shelf Arduino technology and are supported by numerous third party hardware and apps like JMRI, Engine Driver, wiThrottle, Rocrail and more. DCC++ EX is the organization maintaining several codebases that together represent a fully open source DCC system. Currently, this includes the following:
Currently, our products include the following: * [CommandStation-EX](https://github.com/DCC-EX/CommandStation-EX/releases) - the latest take on the DCC++ command station for controlling your trains. Runs on an Arduino board, and includes advanced features such as a WiThrottle server implementation, turnout operation, general purpose inputs and outputs (I/O), and JMRI integration.
* [exWebThrottle](https://github.com/DCC-EX/exWebThrottle) - a simple web based controller for your DCC++ command station.
* [BaseStation-installer](https://github.com/DCC-EX/BaseStation-Installer) - an installer executable that takes care of downloading and installing DCC++ firmware onto your hardware setup.
* [BaseStation-Classic](https://github.com/DCC-EX/BaseStation-Classic) - the original DCC++ software, packaged in a stable release. No active development, bug fixes only.
* [EX-CommandStation](https://github.com/DCC-EX/CommandStation-EX/releases) A basic DCC++ EX hardware setup can use easy to find, widely avalable Arduino boards that you can assemble yourself.
* [EX-WebThrottle](https://github.com/DCC-EX/exWebThrottle)
* [EX-Installer](https://github.com/DCC-EX/EX-Installer) Both CommandStation-EX and BaseStation-Classic support much of the NMRA Digital Command Control (DCC) [standards](http://www.nmra.org/dcc-working-group "NMRA DCC Working Group"), including:
* [EX-MotoShield8874](https://dcc-ex.com/reference/hardware/motorboards/ex-motor-shield-8874.html#gsc.tab=0)
* [EX-DCCInspector](https://github.com/DCC-EX/DCCInspector-EX) * simultaneous control of multiple locomotives
* [EX-Toolbox](https://github.com/DCC-EX/EX-Toolbox) * 2-byte and 4-byte locomotive addressing
* [EX-Turntable](https://github.com/DCC-EX/EX-Turntable) * 28 or 128-step speed throttling
* [EX-IOExpander](https://github.com/DCC-EX/EX-IOExpander) * Activate/de-activate all accessory function addresses 0-2048
* [EX-FastClock](https://github.com/DCC-EX/EX-FastClock) * Control of all cab functions F0-F28 and F29-F68
* [DCCEXProtocol](https://github.com/DCC-EX/DCCEXProtocol) * Main Track: Write configuration variable bytes and set/clear specific configuration variable (CV) bits (aka Programming on Main or POM)
* Programming Track: Same as the main track with the addition of reading configuration variable bytes
* And many more custom features. see [What's new in CommandStation-EX?](#whats-new-in-commandstation-ex)
Details of these projects can be found on [our web site](https://dcc-ex.com/).
# What’s in this Repository? # What’s in this Repository?
This repository, CommandStation-EX, contains a complete DCC-EX *EX-CommmandStation* sketch designed for compiling and uploading into an Arduino Uno, Mega, or Nano. This repository, CommandStation-EX, contains a complete DCC++ EX Commmand Station sketch designed for compiling and uploading into an Arduino Uno, Mega, or Nano.
To utilize this sketch, you can use the following: To utilize this sketch, you can use the following:
1. (recommended for all levels of user) our [automated installer](https://github.com/DCC-EX/EX-Installer) 1. (beginner) our [automated installer](https://github.com/DCC-EX/BaseStation-Installer)
2. (intermediate) download the latest version from the [releases page](https://github.com/DCC-EX/CommandStation-EX/releases) 2. (intermediate) download the latest version from the [releases page](https://github.com/DCC-EX/CommandStation-EX/releases)
3. (advanced) use git clone on this repository 3. (advanced) use git clone on this repository
Refer to [our web site](https://https://dcc-ex.com/ex-commandstation/get-started/index.html#/) for the hardware required for this project. Not using the installer? Open the file "CommandStation-EX.ino" in the
Arduino IDE. Please do not rename the folder containing the sketch
code, nor add any files in that folder. The Arduino IDE relies on the
structure and name of the folder to properly display and compile the
code. Rename or copy config.example.h to config.h. If you do not have
the standard setup, you must edit config.h according to the help texts
in config.h.
**We seriously recommend using the EX-Installer**, however if you choose not to use the installer... ## What's new in CommandStation-EX?
* Open the file ``CommandStation-EX.ino`` in the Arduino IDE or Visual Studio Code (VSC). Please do not rename the folder containing the sketch code, nor add any files in that folder. The Arduino IDE relies on the structure and name of the folder to properly display and compile the code. * WiThrottle server built in. Connect Engine Driver or WiThrottle clients directly to your Command Station (or through JMRI as before)
* Rename or copy ``config.example.h`` to ``config.h``. * WiFi and Ethernet shield support
* You must edit ``config.h`` according to the help texts in ``config.h``. * No more jumpers or soldering!
* Direct support for all the most popular motor control boards including single pin (Arduino) or dual pin (IBT_2) type PWM inputs without the need for an adapter circuit
* I2C Display support (LCD and OLED)
* Improved short circuit detection and automatic reset from an overload
* Current reading, sensing and ACK detection settings in milliAmps instead of just pin readings
* Improved adherence to the NMRA DCC specification
* Complete support for all the old commands and front ends like JMRI
* Railcom cutout (beta)
* Simpler, modular, faster code with an API Library for developers for easy expansion
* New features and functions in JMRI
* Ability to join MAIN and PROG tracks into one MAIN track to run your locos
* "Drive-Away" feature - Throttles with support, like Engine Driver, can allow a loco to be programmed on a usable, electrically isolated programming track and then drive off onto the main track
* Diagnostic commands to test decoders that aren't reading or writing correctly
* Support for Uno, Nano, Mega, Nano Every and Teensy microcontrollers
* User Functions: Filter regular commands (like a turnout or output command) and pass it to your own function or accessory
* Support for LCN (layout control nodes)
* mySetup.h file that acts like an Autoexec.Bat command to send startup commands to the CS
* High Accuracty Waveform option for rock steady DCC signals
* New current response outputs current in mA, overlimit current, and maximum board capable current. Support for new current meter in JMRI
* USB Browser based EX-WebThrottle
* New, simpler, function control command
* Number of locos discovery command `<#>`
* Emergency stop command <!>
* Release cabs from memory command <-> all cabs, <- CAB> for just one loco address
* Automatic slot (register) management
* Automation (coming soon)
NOTE: DCC-EX is a major rewrite to the code. We started over and rebuilt it from the ground up! For what that means, you can read [HERE](https://dcc-ex.com/about/rewrite.html).
# More information # More information
You can learn more at the [DCC-EX website](https://dcc-ex.com/) You can learn more at the [DCC++ EX website](https://dcc-ex.com/)
- November 14, 2020

108
version.h
View File

@ -3,16 +3,104 @@
#include "StringFormatter.h" #include "StringFormatter.h"
#define VERSION "5.0.9" #define VERSION "5.2.42"
// 5.0.9 - EX-IOExpander bug fix for memory allocation // 5.2.42 - ESP32 Bugfix: Uninitialized stack variable
// - EX-IOExpander bug fix to allow for devices with no analogue or no digital pins // 5.2.41 - Update rotary encoder default address to 0x67
// 5.0.8 - Bugfix: Do not crash on turnouts without description // 5.2.40 - Allow no shield
// 5.0.7 - Only flag 2.2.0.0-dev as broken, not 2.2.0.0 // 5.2.39 - Functions for DC frequency: Use func up to F31
// 5.0.6 - Bugfix lost TURNOUTL description // 5.2.38 - Exrail MESSAGE("text") to send a user message to all
// 5.0.5 - Bugfix version detection logic and better message // connected throttles (uses <m "text"> and withrottle Hmtext.
// 5.0.4 - Bugfix: <JR> misses default roster. // 5.2.37 - Bugfix ESP32: Use BOOSTER_INPUT define
// 5.0.3 - Check bad AT firmware version // 5.2.36 - Variable frequency for DC mode
// 5.0.2 - Bugfix: ESP32 30ms off time // 5.2.35 - Bugfix: Make DCC Extended Accessories follow RCN-213
// 5.2.34 - <A address aspect> Command fopr DCC Extended Accessories
// - Exrail ASPECT(address,aspect) for above.
// - EXRAIL DCCX_SIGNAL(Address,redAspect,amberAspect,greenAspect)
// - Exrail intercept <A ...> for DCC Signals.
// 5.2.33 - Exrail CONFIGURE_SERVO(vpin,pos1,pos2,profile)
// 5.2.32 - Railcom Cutout (Initial trial Mega2560 only)
// 5.2.31 - Exrail JMRI_SENSOR(vpin [,count]) creates <S> types.
// 5.2.30 - Bugfix: WiThrottle sendIntro after initial N message as well
// 5.2.29 - Added IO_I2CDFPlayer.h to support DFPLayer over I2C connected to NXP SC16IS750/SC16IS752 (currently only single UART for SC16IS752)
// - Added enhanced IO_I2CDFPLayer enum commands to EXRAIL2.h
// - Added PLAYSOUND alias of ANOUT to EXRAILMacros.h
// - Added UART detection to I2CManager.cpp
// 5.2.28 - ESP32: Can all Wifi channels.
// - ESP32: Only write Wifi password to display if it is a well known one
// 5.2.27 - Bugfix: IOExpander memory allocation
// 5.2.26 - Silently ignore overridden HAL defaults
// - include HAL_IGNORE_DEFAULTS macro in EXRAIL
// 5.2.25 - Fix bug causing <X> after working <D commands
// 5.2.24 - Exrail macro asserts to catch
// : duplicate/missing automation/route/sequence/call ids
// : latches and reserves out of range
// : speeds out of range
// 5.2.23 - KeywordHasher _hk (no functional change)
// 5.2.22 - Bugfixes: Empty turnout descriptions ok; negative route numbers valid.
// 5.2.21 - Add STARTUP_DELAY config option to delay CS bootup
// 5.2.20 - Check return of Ethernet.begin()
// 5.2.19 - ESP32: Determine if the RMT hardware can handle DCC
// 5.2.18 - Display network IP fix
// 5.2.17 - ESP32 simplify network logic
// 5.2.16 - Bugfix to allow for devices using the EX-IOExpander protocol to have no analogue or no digital pins
// 5.2.15 - move call to CommandDistributor::broadcastPower() into the TrackManager::setTrackPower(*) functions
// - add repeats to function packets that are not reminded in accordance with accessory packets
// 5.2.14 - Reminder window DCC packet optimization
// - Optional #define DISABLE_FUNCTION_REMINDERS
// 5.2.13 - EXRAIL STEALTH
// 5.2.12 - ESP32 add AP mode LCD messages with SSID/PW for
// - STM32 change to UID_BASE constants in DCCTimerSTM32 rather than raw hex addresses for UID registers
// - STM32 extra UART/USARTs for larger Nucleo models
// 5.2.11 - Change from TrackManager::returnMode to TrackManager::getMode
// 5.2.10 - Include trainbrains.eu block unoccupancy driver
// - include IO_PCA9555
// 5.2.9 - Bugfix LCD startup with no LCD, uses <@
// 5.2.9 - EXRAIL STASH feature
// 5.2.8 - Bugfix: Do not turn off all tracks on change
// give better power messages
// 5.2.7 - Bugfix: EXRAIL ling segment
// - Bugfix: Back out wrongly added const
// - Bugfix ESP32: Do not inverse DCX direction signal twice
// 5.2.6 - Trackmanager broadcast power state on track mode change
// 5.2.5 - Trackmanager: Do not treat TRACK_MODE_ALL as TRACK_MODE_DC
// 5.2.4 - LCD macro will not do diag if that duplicates @ to same target.
// - Added ROUTE_DISABLED macro in EXRAIL
// 5.2.3 - Bugfix: Catch stange input to parser
// 5.2.2 - Added option to allow MAX_CHARACTER_ROWS to be defined in config.h
// 5.2.1 - Trackmanager rework for simpler structure
// 5.2.0 - ESP32: Autoreverse and booster mode support
// 5.1.21 - EXRAIL invoke multiple ON handlers for same event
// 5.1.20 - EXRAIL Tidy and ROUTE_STATE, ROUTE_CAPTION
// 5.1.19 - Only flag 2.2.0.0-dev as broken, not 2.2.0.0
// 5.1.18 - TURNOUTL bugfix
// 5.1.17 - Divide out C for config and D for diag commands
// 5.1.16 - Remove I2C address from EXTT_TURNTABLE macro to work with MUX, requires separate HAL macro to create
// 5.1.15 - LCC/Adapter support and Exrail feature-compile-out.
// 5.1.14 - Fixed IFTTPOSITION
// 5.1.13 - Changed turntable broadcast from i to I due to server string conflict
// 5.1.12 - Added Power commands <0 A> & <1 A> etc. and update to <=>
// Added EXRAIL SET_POWER(track, ON/OFF)
// Fixed a problem whereby <1 MAIN> also powered on PROG track
// Added functions to TrackManager.cpp to allow UserAddin code for power display on OLED/LCD
// Added - returnMode(byte t), returnDCAddr(byte t) & getModeName(byte Mode)
// 5.1.11 - STM32F4xx revised I2C clock setup, no correctly sets clock and has fully variable frequency selection
// 5.1.10 - STM32F4xx DCCEXanalogWrite to handle PWM generation for TrackManager DC/DCX
// - STM32F4xx DCC 58uS timer now using non-PWM output timers where possible
// - ESP32 brakeCanPWM check now detects UNUSED_PIN
// - ARM architecture brakeCanPWM now uses digitalPinHasPWM()
// - STM32F4xx shadowpin extensions to handle pins on ports D, E and F
// 5.1.9 - Fixed IO_PCA9555'h to work with PCA9548 mux, tested OK
// 5.1.8 - STM32Fxx ADCee extension to support ADCs #2 and #3
// 5.1.7 - Fix turntable broadcasts for non-movement activities and <JP> result
// 5.1.6 - STM32F4xx native I2C driver added
// 5.1.5 - Added turntable object and EXRAIL commands
// - <I ...>, <JO ...>, <JP ...> - turntable commands
// - DCC_TURNTABLE, EXTT_TURNTABLE, IFTTPOSITION, ONROTATE, ROTATE, ROTATE_DCC, TT_ADDPOSITION, WAITFORTT EXRAIL
// 5.1.4 - Added ONOVERLOAD & AFTEROVERLOAD to EXRAIL
// 5.1.3 - Make parser more fool proof
// 5.1.2 - Bugfix: ESP32 30ms off time
// 5.1.1 - Check bad AT firmware version
// - Update IO_PCA9555.h reflecting IO_MCP23017.h changes to support PCA9548 mux
// 5.0.1 - Bugfix: execute 30ms off time before rejoin // 5.0.1 - Bugfix: execute 30ms off time before rejoin
// 5.0.0 - Make 4.2.69 the 5.0.0 release // 5.0.0 - Make 4.2.69 the 5.0.0 release
// 4.2.69 - Bugfix: Make <!> work in DC mode // 4.2.69 - Bugfix: Make <!> work in DC mode