mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 12:51:24 +01:00
Add EX-CSB1 definitions
This commit is contained in:
parent
196a27a27a
commit
156a29a629
@ -89,10 +89,27 @@
|
||||
|
||||
// EX 8874 based shield connected to a 3.3V system (like ESP32) and 12bit (4096) ADC
|
||||
// numbers are GPIO numbers. comments are UNO form factor shield pin numbers
|
||||
#define EX8874_SHIELD F("EX8874"),\
|
||||
#define EX8874_SHIELD F("EX-8874"),\
|
||||
new MotorDriver(25/* 3*/, 19/*12*/, UNUSED_PIN, 13/*9*/, 35/*A2*/, 1.27, 5000, 36 /*A4*/), \
|
||||
new MotorDriver(23/*11*/, 18/*13*/, UNUSED_PIN, 12/*8*/, 34/*A3*/, 1.27, 5000, 39 /*A5*/)
|
||||
|
||||
// EX-CSB1 motor shield definition - note it is different from ESPduino32 pins!
|
||||
#define EX_CSB1 F("EX-CSB1"),\
|
||||
new MotorDriver(25, 0, UNUSED_PIN, -14, 34, 1.27, 5000, 19), \
|
||||
new MotorDriver(27, 15, UNUSED_PIN, -2, 35, 1.27, 5000, 23)
|
||||
|
||||
// EX-CSB1 with EX-8874 stacked on top for 4 outputs
|
||||
#define EX_CSB1_STACK F("EX-CSB1 Stacked"),\
|
||||
new MotorDriver(25, 0, UNUSED_PIN, -14, 34, 1.27, 5000, 19), \
|
||||
new MotorDriver(27, 15, UNUSED_PIN, -2, 35, 1.27, 5000, 23), \
|
||||
new MotorDriver(26, 5, UNUSED_PIN, 13, 36, 1.27, 5000, 18), \
|
||||
new MotorDriver(16, 4, UNUSED_PIN, 12, 39, 1.27, 5000, 17)
|
||||
|
||||
// BOOSTER PIN INPUT ON ESP32
|
||||
// On ESP32 you have the possibility to define a pin as booster input
|
||||
// Arduino pin D2 is GPIO 26 on ESPDuino32, and GPIO 32 on EX-CSB1
|
||||
#define BOOSTER_INPUT 32
|
||||
|
||||
#else
|
||||
// STANDARD shield on any Arduino Uno or Mega compatible with the original specification.
|
||||
#define STANDARD_MOTOR_SHIELD F("STANDARD_MOTOR_SHIELD"), \
|
||||
|
Loading…
Reference in New Issue
Block a user