copyright messages

CommandStation-EX.ino

@@ -27,7 +27,8 @@
 /*
  *  © 2020,2021 Chris Harlow, Harald Barth, David Cutting, 
  *  Fred Decker, Gregor Baues, Anthony W - Dayton  All rights reserved.
- * 
+ *  
+ *  This file is part of CommandStation-EX
  *
  *  This is free software: you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -59,10 +60,18 @@ void setup()
   // This is normally Serial but uses SerialUSB on a SAMD processor
   Serial.begin(115200);
    
+  // Responsibility 2: Start the DCC engine.
+  // Note: this provides DCC with two motor drivers, main and prog, which handle the motor shield(s)
+  // Standard supported devices have pre-configured macros but custome hardware installations require
+  //  detailed pin mappings and may also require modified subclasses of the MotorDriver to implement specialist logic.
+  // STANDARD_MOTOR_SHIELD, POLOLU_MOTOR_SHIELD, FIREBOX_MK1, FIREBOX_MK1S are pre defined in MotorShields.h
+  DCC::begin(MOTOR_SHIELD_TYPE);
+  DIAG(F("License GPLv3 fsf.org (c) dcc-ex.com"));
+
   CONDITIONAL_LCD_START {
     // This block is still executed for DIAGS if LCD not in use 
     LCD(0,F("DCC++ EX v%S"),F(VERSION));
-    LCD(1,F("Starting")); 
+    LCD(1,F("Lic GPLv3")); 
     }   
 
 //  Start the WiFi interface on a MEGA, Uno cannot currently handle WiFi
@@ -75,16 +84,6 @@ void setup()
   EthernetInterface::setup();
 #endif // ETHERNET_ON
 
-  // Responsibility 3: Start the DCC engine.
-  // Note: this provides DCC with two motor drivers, main and prog, which handle the motor shield(s)
-  // Standard supported devices have pre-configured macros but custome hardware installations require
-  //  detailed pin mappings and may also require modified subclasses of the MotorDriver to implement specialist logic.
-
-  // STANDARD_MOTOR_SHIELD, POLOLU_MOTOR_SHIELD, FIREBOX_MK1, FIREBOX_MK1S are pre defined in MotorShields.h
-
- 
-  DCC::begin(MOTOR_SHIELD_TYPE); 
-         
   #if defined(RMFT_ACTIVE) 
       RMFT::begin();
   #endif

DCCEX.h

@@ -1,3 +1,24 @@
+/*
+ *  (c) 2020 Chris Harlow. All rights reserved.
+ *  (c) 2021 Fred Decker.  All rights reserved.
+ *  (c) 2020 Harald Barth. All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
 // This include is intended to visually simplify the .ino for the end users.
 // If there were any #ifdefs required they are much better handled in here.  
 

DCCTimer.h

@@ -1,3 +1,23 @@
+/*
+ *  (c) 2021 Mike S. All rights reserved.
+ *  (c) 2021 Fred Decker.  All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
 #ifndef DCCTimer_h
 #define DCCTimer_h
 #include "Arduino.h"

EEStore.h

@@ -1,3 +1,22 @@
+/*
+ *  (c) 2020 Chris Harlow. All rights reserved.
+ *  (c) 2020 Harald Barth. All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 #ifndef EEStore_h
 #define EEStore_h
 

FSH.h

@@ -1,3 +1,21 @@
+/*
+ *  (c) 2021 Fred Decker.  All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 #ifndef FSH_h
 #define FSH_h
 

LCN.h

@@ -1,3 +1,21 @@
+/*
+ *  (c) 2021 Fred Decker.  All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 #ifndef LCN_h
 #define LCN_h
 #include <Arduino.h>

MotorDrivers.h

@@ -1,3 +1,24 @@
+/*
+ *  (c) 2020 Chris Harlow. All rights reserved.
+ *  (c) 2021 Fred Decker.  All rights reserved.
+ *  (c) 2020 Harald Barth. All rights reserved.
+ *  (c) 2020 Anthony W - Dayton. All rights reserved.
+ *
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 #ifndef MotorDrivers_h
 #define MotorDrivers_h
 #include <Arduino.h>

PWMServoDriver.cpp

@@ -1,5 +1,21 @@
-
-
+/*
+ *  (c) 2020 Chris Harlow. All rights reserved.
+ *
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 /*!
  *  @file PWMServoDriver.cpp
  *
@@ -16,11 +32,7 @@
  *  
  *  @section author Author
  *  Chris Harlow (TPL) 
- *  original by Limor Fried/Ladyada (Adafruit Industries).
  *
- *  @section license License
- *
- *  BSD license, all text above must be included in any redistribution
  */
 #include <Arduino.h>
 #include "PWMServoDriver.h"

PWMServoDriver.h

@@ -1,3 +1,21 @@
+/*
+ *  (c) 2020 Chris Harlow. All rights reserved.
+ *
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 /*!
  *  @file PWMServoDriver.h
  *

SSD1306Ascii.cpp

@@ -1,6 +1,8 @@
 /* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
  * Modifications (C) 2021 Neil McKechnie
  *
+ *  This file is part of CommandStation-EX
+ *
  * This Library is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

SSD1306Ascii.h

@@ -1,6 +1,8 @@
 /* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
  * Modifications (C) 2021 Neil McKechnie
  *
+ *  This file is part of CommandStation-EX
+ *
  * This Library is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

SSD1306font.h

@@ -1,3 +1,19 @@
+/* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
+ * Modifications (C) 2021 Neil McKechnie
+ *
+ *  This file is part of CommandStation-EX
+ *
+ * This Library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This Library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
 /*
  *
  * System5x7

SSD1306init.h

@@ -1,6 +1,8 @@
 /* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
  * Modifications (C) 2021 Neil McKechnie
  *
+ *  This file is part of CommandStation-EX
+ *
  * This Library is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

WifiInboundHandler.h

@@ -1,3 +1,22 @@
+/*
+ *  (c) 2021 Fred Decker.  All rights reserved.
+ *  (c) 2020 Chris Harlow. All rights reserved.
+ *
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 #ifndef WifiInboundHandler_h
 #define WifiInboundHandler_h
 

config.example.h

@@ -1,7 +1,23 @@
-/**********************************************************************
+/*
+ *  COPYRIGHT (c) 2020 Fred Decker
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 
-config.h
-COPYRIGHT (c) 2020 Fred Decker
+/**********************************************************************
 
 The configuration file for DCC-EX Command Station