mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-22 15:46:14 +01:00
TCA8418 initial HAL driver scaffolding
This commit is contained in:
pmantoine
parent
3fa2edb0da
commit
2082051801
|
|
@ -46,14 +46,22 @@
|
|||
|
||||
// Helper function for listing device types
|
||||
static const FSH * guessI2CDeviceType(uint8_t address) {
|
||||
if (address >= 0x20 && address <= 0x26)
|
||||
if (address == 0x1A)
|
||||
// 0x09-0x18 selectable, but for now handle the default
|
||||
return F("Piicodev 865/915MHz Transceiver");
|
||||
else if (address == 0x1C)
|
||||
return F("QMC6310 Magnetometer");
|
||||
else if (address >= 0x20 && address <= 0x26)
|
||||
return F("GPIO Expander");
|
||||
else if (address == 0x27)
|
||||
return F("GPIO Expander or LCD Display");
|
||||
else if (address == 0x29)
|
||||
return F("Time-of-flight sensor");
|
||||
else if (address == 0x34)
|
||||
return F("TCA8418 keypad scanner");
|
||||
else if (address >= 0x3c && address <= 0x3d)
|
||||
return F("OLED Display");
|
||||
// 0x3c can also be an HMC883L magnetometer
|
||||
return F("OLED Display or HMC583L Magnetometer");
|
||||
else if (address >= 0x48 && address <= 0x57) // SC16IS752x UART detection
|
||||
return F("SC16IS75x UART");
|
||||
else if (address >= 0x48 && address <= 0x4f)
|
||||
|
|
@ -62,6 +70,8 @@ static const FSH * guessI2CDeviceType(uint8_t address) {
|
|||
return F("PWM");
|
||||
else if (address >= 0x50 && address <= 0x5f)
|
||||
return F("EEPROM");
|
||||
else if (address == 0x60)
|
||||
return F("Adafruit NeoPixel Driver");
|
||||
else if (address == 0x68)
|
||||
return F("Real-time clock");
|
||||
else if (address >= 0x70 && address <= 0x77)
|
||||
|
|
|
|||
|
|
@ -547,6 +547,7 @@ protected:
|
|||
#include "IO_duinoNodes.h"
|
||||
#include "IO_EXIOExpander.h"
|
||||
#include "IO_trainbrains.h"
|
||||
#include "IO_TCA8418.h"
|
||||
|
||||
|
||||
#endif // iodevice_h
|
||||
|
|
|
|||
181
IO_TCA8418.h
Normal file
181
IO_TCA8418.h
Normal file
|
|
@ -0,0 +1,181 @@
|
|||
/*
|
||||
* © 2023, Paul M. Antoine
|
||||
* © 2021, Neil McKechnie. All rights reserved.
|
||||
*
|
||||
* This file is part of DCC-EX API
|
||||
*
|
||||
* This is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* It is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef io_tca8418_h
|
||||
#define io_tca8418_h
|
||||
|
||||
#include "IO_GPIOBase.h"
|
||||
#include "FSH.h"
|
||||
|
||||
/////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
/*
|
||||
* IODevice subclass for TCA8418 80-key keypad encoder, which we'll treat as 64 of the possible
|
||||
* 80 inputs for now, in an 8x8 matrix only, although the datasheet says:
|
||||
*
|
||||
* The TCA8418 can be configured to support many different configurations of keypad setups.
|
||||
* All 18 GPIOs for the rows and columns can be used to support up to 80 keys in an 8x10 key pad
|
||||
* array. Another option is that all 18 GPIOs be used for GPIs to read 18 buttons which are
|
||||
* not connected in an array. Any combination in between is also acceptable (for example, a
|
||||
* 3x4 keypad matrix and using the remaining 11 GPIOs as a combination of inputs and outputs).
|
||||
*/
|
||||
|
||||
class TCA8418 : public GPIOBase<uint64_t> {
|
||||
public:
|
||||
static void create(VPIN vpin, uint8_t nPins, I2CAddress i2cAddress, int interruptPin=-1) {
|
||||
if (checkNoOverlap(vpin, nPins, i2cAddress))
|
||||
new TCA8418(vpin, (nPins = (nPins > 18) ? 18 : nPins), i2cAddress, interruptPin);
|
||||
}
|
||||
|
||||
private:
|
||||
// Constructor
|
||||
TCA8418(VPIN vpin, uint8_t nPins, I2CAddress i2cAddress, int interruptPin=-1)
|
||||
: GPIOBase<uint64_t>((FSH *)F("TCA8418"), vpin, nPins, i2cAddress, interruptPin)
|
||||
{
|
||||
uint8_t receiveBuffer[1];
|
||||
uint8_t commandBuffer[1];
|
||||
uint8_t status;
|
||||
|
||||
commandBuffer[0] = REG_INT_STAT; // Check interrupt status
|
||||
status = I2CManager.read(_I2CAddress, receiveBuffer, sizeof(receiveBuffer), commandBuffer, sizeof(commandBuffer));
|
||||
if (status == I2C_STATUS_OK) {
|
||||
DIAG(F("TCA8418 Interrupt status was: %x"), receiveBuffer[0]);
|
||||
}
|
||||
else
|
||||
DIAG(F("TCA8418 Interrupt status failed to read!"));
|
||||
// requestBlock.setRequestParams(_I2CAddress, inputBuffer, sizeof(inputBuffer),
|
||||
// outputBuffer, sizeof(outputBuffer));
|
||||
// outputBuffer[0] = REG_GPIOA;
|
||||
}
|
||||
void _writeGpioPort() override {
|
||||
// I2CManager.write(_I2CAddress, 3, REG_GPIOA, _portOutputState, _portOutputState>>8);
|
||||
}
|
||||
void _writePullups() override {
|
||||
// Set pullups only for in-use pins. This prevents pullup being set for a pin that
|
||||
// is intended for use as an output but hasn't been written to yet.
|
||||
uint32_t temp = _portPullup & _portInUse;
|
||||
// I2CManager.write(_I2CAddress, 3, REG_GPPUA, temp, temp>>8);
|
||||
}
|
||||
void _writePortModes() override {
|
||||
// Write 0 to each GPIO_DIRn for in-use pins that are inputs, 1 for outputs
|
||||
uint64_t temp = _portMode & _portInUse;
|
||||
DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIRs"), temp);
|
||||
DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIR1"), (temp&0xFF));
|
||||
I2CManager.write(_I2CAddress, 2, REG_GPIO_DIR1, (temp&0xFF));
|
||||
DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIR2"), ((temp&0xFF00)>>8));
|
||||
I2CManager.write(_I2CAddress, 2, REG_GPIO_DIR2, ((temp&0xFF00)>>8));
|
||||
DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIR3"), (temp&0x30000)>>16);
|
||||
I2CManager.write(_I2CAddress, 2, REG_GPIO_DIR3, ((temp&0x30000)>>16));
|
||||
|
||||
// Enable interrupt for in-use pins which are inputs (_portMode=0)
|
||||
// TCA8418 has interrupt enables per pin, but must be configured for low->high
|
||||
// or high->low... unlike the MCP23017
|
||||
temp = ~_portMode & _portInUse;
|
||||
DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_ENs"), temp);
|
||||
DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_EN1"), (temp&0xFF));
|
||||
I2CManager.write(_I2CAddress, 2, REG_GPIO_INT_EN1, (temp&0xFF));
|
||||
DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_EN2"), ((temp&0xFF00)>>8));
|
||||
I2CManager.write(_I2CAddress, 2, REG_GPIO_INT_EN2, ((temp&0xFF00)>>8));
|
||||
DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_EN3"), (temp&0x30000)>>16);
|
||||
I2CManager.write(_I2CAddress, 2, REG_GPIO_INT_EN3, ((temp&0x30000)>>16));
|
||||
// I2CManager.write(_I2CAddress, 3, REG_INTCONA, 0x00, 0x00);
|
||||
// I2CManager.write(_I2CAddress, 3, REG_GPINTENA, temp, temp>>8);
|
||||
}
|
||||
void _readGpioPort(bool immediate) override {
|
||||
// if (immediate) {
|
||||
// uint8_t buffer[2];
|
||||
// I2CManager.read(_I2CAddress, buffer, 2, 1, REG_GPIOA);
|
||||
// _portInputState = ((uint16_t)buffer[1]<<8) | buffer[0] | _portMode;
|
||||
// } else {
|
||||
// // Queue new request
|
||||
// requestBlock.wait(); // Wait for preceding operation to complete
|
||||
// // Issue new request to read GPIO register
|
||||
// I2CManager.queueRequest(&requestBlock);
|
||||
// }
|
||||
}
|
||||
// This function is invoked when an I/O operation on the requestBlock completes.
|
||||
void _processCompletion(uint8_t status) override {
|
||||
// if (status == I2C_STATUS_OK)
|
||||
// _portInputState = (((uint16_t)inputBuffer[1]<<8) | inputBuffer[0]) | _portMode;
|
||||
// else
|
||||
// _portInputState = 0xffff;
|
||||
}
|
||||
|
||||
void _setupDevice() override {
|
||||
// IOCON is set MIRROR=1, ODR=1 (open drain shared interrupt pin)
|
||||
// I2CManager.write(_I2CAddress, 2, REG_IOCON, 0x44);
|
||||
_writePortModes();
|
||||
_writePullups();
|
||||
_writeGpioPort();
|
||||
}
|
||||
|
||||
enum
|
||||
{
|
||||
REG_FIRST_RESERVED = 0x00,
|
||||
REG_CFG = 0x01,
|
||||
REG_INT_STAT = 0x02,
|
||||
REG_KEY_LCK_EC = 0x03,
|
||||
REG_KEY_EVENT_A = 0x04,
|
||||
REG_KEY_EVENT_B = 0x05,
|
||||
REG_KEY_EVENT_C = 0x06,
|
||||
REG_KEY_EVENT_D = 0x07,
|
||||
REG_KEY_EVENT_E = 0x08,
|
||||
REG_KEY_EVENT_F = 0x09,
|
||||
REG_KEY_EVENT_G = 0x0A,
|
||||
REG_KEY_EVENT_H = 0x0B,
|
||||
REG_KEY_EVENT_I = 0x0C,
|
||||
REG_KEY_EVENT_J = 0x0D,
|
||||
REG_KP_LCK_TIMER = 0x0E,
|
||||
REG_UNLOCK1 = 0x0F,
|
||||
REG_UNLOCK2 = 0x10,
|
||||
REG_GPIO_INT_STAT1 = 0x11,
|
||||
REG_GPIO_INT_STAT2 = 0x12,
|
||||
REG_GPIO_INT_STAT3 = 0x13,
|
||||
REG_GPIO_DAT_STAT1 = 0x14,
|
||||
REG_GPIO_DAT_STAT2 = 0x15,
|
||||
REG_GPIO_DAT_STAT3 = 0x16,
|
||||
REG_GPIO_DAT_OUT1 = 0x17,
|
||||
REG_GPIO_DAT_OUT2 = 0x18,
|
||||
REG_GPIO_DAT_OUT3 = 0x19,
|
||||
REG_GPIO_INT_EN1 = 0x1A,
|
||||
REG_GPIO_INT_EN2 = 0x1B,
|
||||
REG_GPIO_INT_EN3 = 0x1C,
|
||||
REG_KP_GPIO1 = 0x1D,
|
||||
REG_KP_GPIO2 = 0x1E,
|
||||
REG_KP_GPIO3 = 0x1F,
|
||||
REG_GPI_EM1 = 0x20,
|
||||
REG_GPI_EM2 = 0x21,
|
||||
REG_GPI_EM3 = 0x22,
|
||||
REG_GPIO_DIR1 = 0x23,
|
||||
REG_GPIO_DIR2 = 0x24,
|
||||
REG_GPIO_DIR3 = 0x25,
|
||||
REG_GPIO_INT_LVL1 = 0x26,
|
||||
REG_GPIO_INT_LVL2 = 0x27,
|
||||
REG_GPIO_INT_LVL3 = 0x28,
|
||||
REG_DEBOUNCE_DIS1 = 0x29,
|
||||
REG_DEBOUNCE_DIS2 = 0x2A,
|
||||
REG_DEBOUNCE_DIS3 = 0x2B,
|
||||
REG_GPIO_PULL1 = 0x2C,
|
||||
REG_GPIO_PULL2 = 0x2D,
|
||||
REG_GPIO_PULL3 = 0x2E,
|
||||
REG_LAST_RESERVED = 0x2F,
|
||||
};
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
@ -218,14 +218,14 @@ monitor_echo = yes
|
|||
; Commented out by default as the F446ZE needs variant files
|
||||
; installed before you can let PlatformIO see this
|
||||
;
|
||||
; [env:Nucleo-F446ZE]
|
||||
; platform = ststm32
|
||||
; board = nucleo_f446ze
|
||||
; framework = arduino
|
||||
; lib_deps = ${env.lib_deps}
|
||||
; build_flags = -std=c++17 -Os -g2 -Wunused-variable
|
||||
; monitor_speed = 115200
|
||||
; monitor_echo = yes
|
||||
[env:Nucleo-F446ZE]
|
||||
platform = ststm32
|
||||
board = nucleo_f446ze
|
||||
framework = arduino
|
||||
lib_deps = ${env.lib_deps}
|
||||
build_flags = -std=c++17 -Os -g2 -Wunused-variable
|
||||
monitor_speed = 115200
|
||||
monitor_echo = yes
|
||||
|
||||
; Commented out by default as the F412ZG needs variant files
|
||||
; installed before you can let PlatformIO see this
|
||||
|
|
|
|||
|
|
@ -3,7 +3,8 @@
|
|||
|
||||
#include "StringFormatter.h"
|
||||
|
||||
#define VERSION "5.2.36"
|
||||
#define VERSION "5.2.36i2c"
|
||||
// 5.2.36i2c - Add various I2C drivers, including TCA8418 and Adafruit NeoPixel Driver initially
|
||||
// 5.2.36 - Variable frequency for DC mode
|
||||
// 5.2.35 - Bugfix: Make DCC Extended Accessories follow RCN-213
|
||||
// 5.2.34 - <A address aspect> Command fopr DCC Extended Accessories
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user