diff --git a/IODevice.h b/IODevice.h
index 467ff71..250f7b4 100644
--- a/IODevice.h
+++ b/IODevice.h
@@ -547,7 +547,9 @@ protected:
 #include "IO_duinoNodes.h"
 #include "IO_EXIOExpander.h"
 #include "IO_trainbrains.h"
-#include "IO_EncoderThrottle.h"#include "IO_TCA8418.h"
+#include "IO_EncoderThrottle.h"
+#include "IO_TCA8418.h"
+#include "IO_NeoPixel.h"
 
 
 #endif // iodevice_h
diff --git a/IO_NeoPixel.h b/IO_NeoPixel.h
new file mode 100644
index 0000000..25ed79d
--- /dev/null
+++ b/IO_NeoPixel.h
@@ -0,0 +1,156 @@
+/*
+ *  © 2024, Chris Harlow. All rights reserved.
+ *
+ *  This file is part of EX-CommandStation
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+/*
+* The IO_NEOPIXEL.h device driver integrates with one or more Adafruit neopixel drivers.
+* This device driver will configure the device on startup, along with
+* interacting with the device for all input/output duties.
+*
+* To create NEOPIXEL devices, these are defined in myAutomation.h:
+* (Note the device driver is included by default)
+*
+* HAL(NEOPIXEL,first vpin, number of pixels, i2c address) 
+* e.g. HAL(NEOPIXEL,1000,64,0x60)
+* This gives each pixel in the chain an individual vpin
+* The number of pixels must match the physical pixels in the chain. 
+* 
+* This driver maintains a colour (rgb value in 5,5,5 bits only) plus an ON bit.
+* This can be written/read with an analog write/read call. 
+* The ON bit can be set on and off with a digital write. This allows for 
+* a pixel to be preset a colour and then turned on and off like any other light. 
+*/
+
+#ifndef IO_EX_NeoPixel_H
+#define IO_EX_NeoPixel_H
+
+#include "IODevice.h"
+#include "I2CManager.h"
+#include "DIAG.h"
+#include "FSH.h"
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+/*
+ * IODevice subclass for NeoPixel.
+ */
+class NeoPixel : public IODevice {
+public:
+
+  
+  static void create(VPIN vpin, int nPins, I2CAddress i2cAddress) {
+    if (checkNoOverlap(vpin, nPins, i2cAddress)) new NeoPixel(vpin, nPins, i2cAddress);
+  }
+
+private:
+  static const uint16_t NEOPIXEL_ON_FLAG=0x0001; 
+  
+  // Constructor
+  NeoPixel(VPIN firstVpin, int nPins, I2CAddress i2cAddress) {
+    _firstVpin = firstVpin;
+    _I2CAddress = i2cAddress;
+    addDevice(this);
+  }
+
+  void _begin() {
+    // Initialise Neopixel device
+    I2CManager.begin();
+    if (!I2CManager.exists(_I2CAddress)) {
+      DIAG(F("NeoPixel I2C:%s device not found"), _I2CAddress.toString());
+      _deviceState = DEVSTATE_FAILED;
+      return;
+    }
+
+    // TODO - initialize the neopixel board
+
+    pixelBuffer=(uint16_t *) calloc(_nPins,sizeof(uint16_t)); // all pixels off  
+     _display();
+  }
+  
+
+  // read back pixel colour (rarely needed I suspect)
+  int _readAnalogue(VPIN vpin) override {
+    if (_deviceState == DEVSTATE_FAILED) return 0;
+    auto pin=vpin-_firstVpin;
+    return pixelBuffer[pin];
+  }
+
+  // read back pixel on/off
+  int _read(VPIN vpin) override {
+    if (_deviceState == DEVSTATE_FAILED) return 0;
+    auto pin=vpin-_firstVpin;
+    return pixelBuffer[pin] & NEOPIXEL_ON_FLAG;
+  }
+
+  // Write digital value. Sets pixel on or off
+  void _write(VPIN vpin, int value) override {
+    if (_deviceState == DEVSTATE_FAILED) return;
+    auto pin=vpin-_firstVpin;
+    if (value) {
+      if (pixelBuffer[pin] & NEOPIXEL_ON_FLAG) return;
+      pixelBuffer[pin] |= NEOPIXEL_ON_FLAG;
+    }
+    else { // set off
+      if (!(pixelBuffer[pin] & NEOPIXEL_ON_FLAG)) return;
+      pixelBuffer[pin] &= (~NEOPIXEL_ON_FLAG);
+     }
+     transmit(pin);
+  }
+
+  // Write analogue (integer) value
+  void _writeAnalogue(VPIN vpin, int colour, uint8_t ignore1, uint16_t ignore2) override {
+    (void) ignore1;
+    (void) ignore2;
+    auto newColour=(uint16_t)colour;
+    if (_deviceState == DEVSTATE_FAILED) return;
+    auto pin=vpin-_firstVpin;
+    if (pixelBuffer[pin]==newColour) return;
+      pixelBuffer[pin]=newColour;
+      transmit(pin);  
+  }
+
+  // Display device information and status.
+  void _display() override {
+    DIAG(F("NeoPixel I2C:%s Vpins %u-%u %S"),
+              _I2CAddress.toString(), 
+              (int)_firstVpin, (int)_firstVpin+_nPins-1,
+              _deviceState == DEVSTATE_FAILED ? F("OFFLINE") : F(""));
+  }
+
+  // Helper function for error handling
+  void reportError(uint8_t status, bool fail=true) {
+    DIAG(F("NeoPixel I2C:%s Error:%d (%S)"), _I2CAddress.toString(), 
+      status, I2CManager.getErrorMessage(status));
+    if (fail)
+    _deviceState = DEVSTATE_FAILED;
+  }
+
+  void transmit(uint16_t pin) {
+    auto colour=pixelBuffer[pin];
+    if (colour & NEOPIXEL_ON_FLAG) {
+      // TODO convert 5,5,5 to RGB 
+    } 
+    else {
+      // TODO set black
+    }
+    // TODO transmit pixel to driver
+  }
+  uint16_t*  pixelBuffer = nullptr;
+  
+};
+
+#endif
diff --git a/IO_TCA8418.h b/IO_TCA8418.h
index 25c5ec3..b3302b9 100644
--- a/IO_TCA8418.h
+++ b/IO_TCA8418.h
@@ -71,6 +71,7 @@ private:
     // Set pullups only for in-use pins.  This prevents pullup being set for a pin that
     //  is intended for use as an output but hasn't been written to yet.
     uint32_t temp = _portPullup & _portInUse;
+    (void)temp; // Chris did this so he could see warnings that mattered
     // I2CManager.write(_I2CAddress, 3, REG_GPPUA, temp, temp>>8);  
   }
   void _writePortModes() override {