mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-24 13:21:23 +01:00
Activate and remove NOP macros
This commit is contained in:
Asbelos
parent
0018ba676b
commit
39c7bf3983
13
RMFT2.cpp
13
RMFT2.cpp
@ -24,11 +24,11 @@
|
||||
F4. Oled announcements (depends on HAL)
|
||||
F5. Withrottle roster info
|
||||
F6. Multi-occupancy semaphore
|
||||
F7. Self starting sequences
|
||||
F7. [DONE see AUTOSTART] Self starting sequences
|
||||
F8. Park/unpark
|
||||
*/
|
||||
/* EXRAILPlus planned TRANSPARENT additions
|
||||
[DONE]T1. RAM based fast lookup for sequences ON* event catchers and signals.
|
||||
T1. [DONE] RAM based fast lookup for sequences ON* event catchers and signals.
|
||||
T2. Extend to >64k
|
||||
*/
|
||||
|
||||
@ -666,6 +666,15 @@ void RMFT2::loop2() {
|
||||
DCC::setFn(operand,GET_OPERAND(1),false);
|
||||
break;
|
||||
|
||||
case OPCODE_DCCACTIVATE: {
|
||||
// operand is address<<3 | subaddr<<1 | active
|
||||
int16_t addr=operand>>3;
|
||||
int16_t subaddr=(operand>>1) & 0x03;
|
||||
bool active=operand & 0x01;
|
||||
DCC::setAccessory(addr,subaddr,active);
|
||||
break;
|
||||
}
|
||||
|
||||
case OPCODE_FOLLOW:
|
||||
progCounter=sequenceLookup->find(operand);
|
||||
if (progCounter<0) kill(F("FOLLOW unknown"), operand);
|
||||
|
||||
2
RMFT2.h
2
RMFT2.h
@ -42,7 +42,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
|
||||
OPCODE_START,OPCODE_SETLOCO,OPCODE_SENDLOCO,
|
||||
OPCODE_PAUSE, OPCODE_RESUME,OPCODE_POWEROFF,
|
||||
OPCODE_ONCLOSE, OPCODE_ONTHROW, OPCODE_SERVOTURNOUT, OPCODE_PINTURNOUT,
|
||||
OPCODE_PRINT,
|
||||
OPCODE_PRINT,OPCODE_DCCACTIVATE,
|
||||
OPCODE_ROUTE,OPCODE_AUTOMATION,OPCODE_SEQUENCE,OPCODE_ENDTASK,OPCODE_ENDEXRAIL
|
||||
};
|
||||
|
||||
|
||||
49
RMFTMacros.h
49
RMFTMacros.h
@ -16,6 +16,7 @@
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef RMFTMacros_H
|
||||
#define RMFTMacros_H
|
||||
|
||||
@ -25,7 +26,7 @@
|
||||
|
||||
|
||||
// This file will include and build the EXRAIL script and associated helper tricks.
|
||||
// It does this by incliding myAutomation.h several times, each with a set of macros to
|
||||
// It does this by including myAutomation.h several times, each with a set of macros to
|
||||
// extract the relevant parts.
|
||||
|
||||
// The entire automation script is contained within a byte array RMFT2::RouteCode[]
|
||||
@ -58,6 +59,10 @@
|
||||
#define ENDEXRAIL }
|
||||
|
||||
#define AFTER(sensor_id)
|
||||
#define ACTIVATE(addr,subaddr)
|
||||
#define DEACTIVATE(addr,subaddr)
|
||||
#define ACTIVATEL(addr)
|
||||
#define DEACTIVATEL(addr)
|
||||
#define AMBER(signal_id)
|
||||
#define AT(sensor_id)
|
||||
#define AUTOSTART
|
||||
@ -157,6 +162,10 @@ const int StringMacroTracker1=__COUNTER__;
|
||||
|
||||
// Setup for Pass 3: create main routes table
|
||||
#undef AFTER
|
||||
#undef ACTIVATE
|
||||
#undef DEACTIVATE
|
||||
#undef ACTIVATEL
|
||||
#undef DEACTIVATEL
|
||||
#undef AMBER
|
||||
#undef AT
|
||||
#undef AUTOMATION
|
||||
@ -226,29 +235,35 @@ const int StringMacroTracker1=__COUNTER__;
|
||||
#undef XFOFF
|
||||
#undef XFON
|
||||
|
||||
// Define internal helper macros.
|
||||
// Everything we generate here has to be compile-time evaluated to
|
||||
// a constant.
|
||||
#define V(val) (byte)(((int16_t)(val))&0x00FF),(byte)(((int16_t)(val)>>8)&0x00FF)
|
||||
// Define macros for route code creation
|
||||
#define V(val) ((int16_t)(val))&0x00FF,((int16_t)(val)>>8)&0x00FF
|
||||
#define NOP 0,0
|
||||
|
||||
#define ALIAS(name,value)
|
||||
#define EXRAIL const FLASH byte RMFT2::RouteCode[] = {
|
||||
#define AUTOMATION(id, description) OPCODE_AUTOMATION, V(id),
|
||||
#define ROUTE(id, description) OPCODE_ROUTE, V(id),
|
||||
#define SEQUENCE(id) OPCODE_SEQUENCE, V(id),
|
||||
#define ENDTASK OPCODE_ENDTASK,NOP,
|
||||
#define DONE OPCODE_ENDTASK,NOP,
|
||||
#define ENDEXRAIL OPCODE_ENDTASK,NOP,OPCODE_ENDEXRAIL,NOP };
|
||||
#define ENDTASK OPCODE_ENDTASK,0,0,
|
||||
#define DONE OPCODE_ENDTASK,0,0,
|
||||
#define ENDEXRAIL OPCODE_ENDTASK,0,0,OPCODE_ENDEXRAIL,0,0 };
|
||||
|
||||
#define ACTIVATE(addr,subaddr) OPCODE_DCCACTIVATE,V(addr<<3 | subaddr<<1 | 1),
|
||||
#define DEACTIVATE(addr,subaddr) OPCODE_DCCACTIVATE,V(addr<<3 | subaddr<<1),
|
||||
#define ACTIVATEL(addr) OPCODE_DCCACTIVATE,V((addr+3)<<3 | 1),
|
||||
#define DEACTIVATEL(addr) OPCODE_DCCACTIVATE,V((addr+3)<<3),
|
||||
|
||||
#define AFTER(sensor_id) OPCODE_AT,V(sensor_id),OPCODE_AFTER,V(sensor_id),
|
||||
#define AMBER(signal_id) OPCODE_AMBER,V(signal_id),
|
||||
#define AT(sensor_id) OPCODE_AT,V(sensor_id),
|
||||
#define AUTOSTART OPCODE_AUTOSTART,NOP,
|
||||
#define AUTOSTART OPCODE_AUTOSTART,0,0,
|
||||
#define CALL(route) OPCODE_CALL,V(route),
|
||||
#define CLOSE(id) OPCODE_CLOSE,V(id),
|
||||
#define DELAY(ms) OPCODE_DELAY,V(ms/100L),
|
||||
#define DELAYMINS(mindelay) OPCODE_DELAYMINS,V(mindelay),
|
||||
#define DELAYRANDOM(mindelay,maxdelay) OPCODE_DELAY,V(mindelay/100L),OPCODE_RANDWAIT,V((maxdelay-mindelay)/100L),
|
||||
#define ENDIF OPCODE_ENDIF,NOP,
|
||||
#define ENDIF OPCODE_ENDIF,0,0,
|
||||
#define ESTOP OPCODE_SPEED,V(1),
|
||||
#define FADE(pin,value,ms) OPCODE_SERVO,V(pin),OPCODE_PAD,V(value),OPCODE_PAD,V(PCA9685::ProfileType::UseDuration|PCA9685::NoPowerOff),OPCODE_PAD,V(ms/100L),
|
||||
#define FOFF(func) OPCODE_FOFF,V(func),
|
||||
@ -261,23 +276,23 @@ const int StringMacroTracker1=__COUNTER__;
|
||||
#define IFNOT(sensor_id) OPCODE_IFNOT,V(sensor_id),
|
||||
#define IFRANDOM(percent) OPCODE_IFRANDOM,V(percent),
|
||||
#define IFRESERVE(block) OPCODE_IFRESERVE,V(block),
|
||||
#define INVERT_DIRECTION OPCODE_INVERT_DIRECTION,NOP,
|
||||
#define JOIN OPCODE_JOIN,NOP,
|
||||
#define INVERT_DIRECTION OPCODE_INVERT_DIRECTION,0,0,
|
||||
#define JOIN OPCODE_JOIN,0,0,
|
||||
#define LATCH(sensor_id) OPCODE_LATCH,V(sensor_id),
|
||||
#define LCD(id,msg) PRINT(msg)
|
||||
#define LCN(msg) PRINT(msg)
|
||||
#define ONCLOSE(turnout_id) OPCODE_ONCLOSE,V(turnout_id),
|
||||
#define ONTHROW(turnout_id) OPCODE_ONTHROW,V(turnout_id),
|
||||
#define PAUSE OPCODE_PAUSE,NOP,
|
||||
#define PAUSE OPCODE_PAUSE,0,0,
|
||||
#define POM(cv,value) OPCODE_POM,V(cv),OPCODE_PAD,V(value),
|
||||
#define POWEROFF OPCODE_POWEROFF,NOP,
|
||||
#define POWEROFF OPCODE_POWEROFF,0,0,
|
||||
#define PRINT(msg) OPCODE_PRINT,V(__COUNTER__ - StringMacroTracker2),
|
||||
#define READ_LOCO OPCODE_READ_LOCO1,NOP,OPCODE_READ_LOCO2,NOP,
|
||||
#define READ_LOCO OPCODE_READ_LOCO1,0,0,OPCODE_READ_LOCO2,0,0,
|
||||
#define RED(signal_id) OPCODE_RED,V(signal_id),
|
||||
#define RESERVE(blockid) OPCODE_RESERVE,V(blockid),
|
||||
#define RESET(pin) OPCODE_RESET,V(pin),
|
||||
#define RESUME OPCODE_RESUME,NOP,
|
||||
#define RETURN OPCODE_RETURN,NOP,
|
||||
#define RESUME OPCODE_RESUME,0,0,
|
||||
#define RETURN OPCODE_RETURN,0,0,
|
||||
#define REV(speed) OPCODE_REV,V(speed),
|
||||
#define SENDLOCO(cab,route) OPCODE_SENDLOCO,V(cab),OPCODE_PAD,V(route),
|
||||
#define SERIAL(msg) PRINT(msg)
|
||||
@ -296,7 +311,7 @@ const int StringMacroTracker1=__COUNTER__;
|
||||
#define PIN_TURNOUT(id,pin) OPCODE_PINTURNOUT,V(id),OPCODE_PAD,V(pin),
|
||||
#define THROW(id) OPCODE_THROW,V(id),
|
||||
#define TURNOUT(id,addr,subaddr) OPCODE_TURNOUT,V(id),OPCODE_PAD,V(addr),OPCODE_PAD,V(subaddr),
|
||||
#define UNJOIN OPCODE_UNJOIN,NOP,
|
||||
#define UNJOIN OPCODE_UNJOIN,0,0,
|
||||
#define UNLATCH(sensor_id) OPCODE_UNLATCH,V(sensor_id),
|
||||
#define WAITFOR(pin) OPCODE_WAITFOR,V(pin),
|
||||
#define XFOFF(cab,func) OPCODE_XFOFF,V(cab),OPCODE_PAD,V(func),
|
||||
|
||||
Loading…
Reference in New Issue
Block a user