Add I2C support functions

Add new read/write functions to I2CManager class, and modify the LCD, OLED and PWM classes to use them effectively.

I2CManager.cpp

@@ -17,6 +17,8 @@
  *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
  */
 
+#include <stdarg.h>
+#include <Wire.h>
 #include "I2CManager.h"
 
 // If not already initialised, initialise I2C (wire).
@@ -48,10 +50,80 @@ void I2CManagerClass::forceClock(uint32_t speed) {
 
 // Check if specified I2C address is responding.
 // Returns 0 if OK, or error code.
-uint8_t I2CManagerClass::exists(uint8_t address) {
+uint8_t I2CManagerClass::checkAddress(uint8_t address) {
   begin();
   Wire.beginTransmission(address);
   return Wire.endTransmission();
 }
 
+bool I2CManagerClass::exists(uint8_t address) {
+  return checkAddress(address)==0;
+}
+
+// Write a complete transmission to I2C using a supplied buffer of data
+uint8_t I2CManagerClass::write(uint8_t address, const uint8_t buffer[], uint8_t size) {
+  Wire.beginTransmission(address);
+  Wire.write(buffer, size);
+  return Wire.endTransmission();
+}
+
+// Write a complete transmission to I2C using a supplied buffer of data in Flash
+uint8_t I2CManagerClass::write_P(uint8_t address, const uint8_t buffer[], uint8_t size) {
+  uint8_t ramBuffer[size];
+  memcpy_P(ramBuffer, buffer, size);
+  return write(address, ramBuffer, size);
+}
+  
+
+// Write a complete transmission to I2C using a list of data 
+uint8_t I2CManagerClass::write(uint8_t address, int nBytes, ...) {
+  uint8_t buffer[nBytes];
+  va_list args;
+  va_start(args, nBytes);
+  for (uint8_t i=0; i<nBytes; i++)
+    buffer[i] = va_arg(args, int);
+  va_end(args);
+  return write(address, buffer, nBytes);
+}
+
+// Write a command and read response, returns number of bytes received.
+//  Different modules use different ways of accessing registers: 
+//    PCF8574 I/O expander justs needs the address (no data);
+//    PCA9685 needs a two byte command to select the register(s) to be read;
+//    MCP23016 needs a one-byte command to select the register.
+// Some devices use 8-bit registers exclusively and some have 16-bit registers.
+// Therefore the following function is general purpose, to apply to any
+// type of I2C device.
+//
+uint8_t I2CManagerClass::read(uint8_t address, uint8_t readBuffer[], uint8_t readSize,
+                              uint8_t writeBuffer[], uint8_t writeSize) {
+  if (writeSize > 0) {
+    Wire.beginTransmission(address);
+    Wire.write(writeBuffer, writeSize);
+    Wire.endTransmission(false); // Don't free bus yet
+  }
+  Wire.requestFrom(address, readSize);
+  uint8_t nBytes = 0;
+  while (Wire.available() && nBytes < readSize) 
+    readBuffer[nBytes++] = Wire.read();
+  return nBytes;
+}
+
+// Overload of read() to allow command to be specified as a series of bytes.
+uint8_t I2CManagerClass::read(uint8_t address, uint8_t readBuffer[], uint8_t readSize, 
+                                  uint8_t writeSize, ...) {
+  va_list args;
+  // Copy the series of bytes into an array.
+  va_start(args, writeSize);
+  uint8_t writeBuffer[writeSize];
+  for (uint8_t i=0; i<writeSize; i++)
+    writeBuffer[i] = va_arg(args, int);
+  va_end(args);
+  return read(address, readBuffer, readSize, writeBuffer, writeSize);
+}
+
+uint8_t I2CManagerClass::read(uint8_t address, uint8_t readBuffer[], uint8_t readSize) {
+  return read(address, readBuffer, readSize, NULL, 0);
+}
+
 I2CManagerClass I2CManager = I2CManagerClass();

I2CManager.h

@@ -20,7 +20,7 @@
 #ifndef I2CManager_h
 #define I2CManager_h
 
-#include <Wire.h>
+#include "FSH.h"
 
 /* 
  * Helper class to manage access to the I2C 'Wire' subsystem.
@@ -48,12 +48,27 @@ public:
   // Force clock speed 
   void forceClock(uint32_t speed);
   // Check if specified I2C address is responding.
-  uint8_t exists(uint8_t address);
+  uint8_t checkAddress(uint8_t address);
+  bool exists(uint8_t address);
+  // Write a complete transmission to I2C from an array in RAM
+  uint8_t write(uint8_t address, const uint8_t buffer[], uint8_t size);
+  // Write a complete transmission to I2C from an array in Flash
+  uint8_t write_P(uint8_t address, const uint8_t buffer[], uint8_t size);
+  // Write a transmission to I2C from a list of bytes.
+  uint8_t write(uint8_t address, int nBytes, ...);
+  // Write a command from an array in RAM and read response
+  uint8_t read(uint8_t address, uint8_t writeBuffer[], uint8_t writeSize, 
+    uint8_t readBuffer[], uint8_t readSize);
+  // Write a command from an arbitrary list of bytes and read response
+  uint8_t read(uint8_t address, uint8_t readBuffer[], uint8_t readSize, 
+    uint8_t writeSize, ...);
+  // Write a null command and read the response.
+  uint8_t read(uint8_t address, uint8_t readBuffer[], uint8_t readSize);
 
 private:
   bool _beginCompleted = false;
   bool _clockSpeedFixed = false;
-  uint32_t _clockSpeed = 1000000L; // 1MHz max on Arduino.
+  uint32_t _clockSpeed = 400000L;  // 400kHz max on Arduino.
 };
 
 extern I2CManagerClass I2CManager;

LCD_OLED.h

@@ -24,7 +24,6 @@
 
 #include "I2CManager.h"
 #include "SSD1306Ascii.h"
-#include "Wire.h"
 SSD1306AsciiWire LCDDriver;
 
 // DEVICE SPECIFIC LCDDisplay Implementation for OLED
@@ -34,10 +33,9 @@ LCDDisplay::LCDDisplay() {
   I2CManager.begin();
   I2CManager.setClock(400000L);  // Set max supported I2C speed
   for (byte address = 0x3c; address <= 0x3d; address++) {
-    byte error = I2CManager.exists(address);
+    if (I2CManager.exists(address)) {
-    if (!error) {
       // Device found
-      DIAG(F("OLED display found at 0x%x"), address);
+      DIAG(F("\nOLED display found at 0x%x"), address);
       interfake(OLED_DRIVER, 0);
       const DevType *devType;
       if (lcdCols == 132)
@@ -65,7 +63,7 @@ void LCDDisplay::interfake(int p1, int p2, int p3) {
 void LCDDisplay::clearNative() { LCDDriver.clear(); }
 
 void LCDDisplay::setRowNative(byte row) {
-  // Positions text write to start of row 1..n and clears previous text
+  // Positions text write to start of row 1..n
   int y = row;
   LCDDriver.setCursor(0, y);
 }

LiquidCrystal_I2C.cpp

@@ -15,32 +15,13 @@
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
- *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ *  along with CommandStation-EX.  If not, see <https://www.gnu.org/licenses/>.
  */
 
+#include <Arduino.h>
 #include "LiquidCrystal_I2C.h"
 #include "I2CManager.h"
 
-#include <inttypes.h>
-#if defined(ARDUINO) && ARDUINO >= 100
-
-#include "Arduino.h"
-
-#define printIIC(args) Wire.write(args)
-inline size_t LiquidCrystal_I2C::write(uint8_t value) {
-  send(value, Rs);
-  return 1;
-}
-
-#else
-#include "WProgram.h"
-
-#define printIIC(args) Wire.send(args)
-inline void LiquidCrystal_I2C::write(uint8_t value) { send(value, Rs); }
-
-#endif
-#include "Wire.h"
-
 // When the display powers up, it is configured as follows:
 //
 // 1. Display clear
@@ -72,7 +53,7 @@ void LiquidCrystal_I2C::init() { init_priv(); }
 
 void LiquidCrystal_I2C::init_priv() {
   I2CManager.begin();
-  I2CManager.setClock(100000L);    // PCF8574 is limited to 100kHz.
+  I2CManager.setClock(100000L);    // PCF8574 is spec'd to 100kHz.
 
   _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
   begin(_cols, _rows);
@@ -85,7 +66,6 @@ void LiquidCrystal_I2C::begin(uint8_t cols, uint8_t lines) {
   _numlines = lines;
   (void)cols; // Suppress compiler warning.
 
-  // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
   // according to datasheet, we need at least 40ms after power rises above 2.7V
   // before sending commands. Arduino can turn on way befer 4.5V so we'll allow
   // 100 milliseconds after pulling both RS and R/W and backlight pin low
@@ -167,23 +147,11 @@ void LiquidCrystal_I2C::backlight(void) {
   expanderWrite(0);
 }
 
-void LiquidCrystal_I2C::setBacklight(uint8_t new_val) {
-  if (new_val) {
-    backlight();  // turn backlight on
-  } else {
-    noBacklight();  // turn backlight off
-  }
-}
-
-void LiquidCrystal_I2C::printstr(const char c[]) {
-  // This function is not identical to the function used for "real" I2C displays
-  // it's here so the user sketch doesn't have to be changed
-  print(c);
-}
-
 /*********** mid level commands, for sending data/cmds */
 
-inline void LiquidCrystal_I2C::command(uint8_t value) { send(value, 0); }
+inline void LiquidCrystal_I2C::command(uint8_t value) { 
+  send(value, 0); 
+}
 
 /************ low level data pushing commands **********/
 
@@ -209,37 +177,37 @@ inline void LiquidCrystal_I2C::command(uint8_t value) { send(value, 0); }
  * transmission and start another one is a stop bit, a start bit, 8 address bits,
  * an ack, 8 data bits and another ack; this is at least 20 bits, i.e. >50us
  * at 400kHz and >200us at 100kHz. Therefore, we don't need additional delay.
+ * 
+ * Similarly, the Enable must be set/reset for at least 450ns.  This is 
+ * well within the I2C clock cycle time of 2.5us at 400kHz.  Data is clocked in
+ * to the HD44780 on the trailing edge of the Enable pin, so we set the Enable
+ * as we present the data, then in the next byte we reset Enable without changing
+ * the data.
  */
 
-// write either command or data (8 bits) to the HD44780 as
+// write either command or data (8 bits) to the HD44780 LCD controller as
 //  a single I2C transmission. 
 void LiquidCrystal_I2C::send(uint8_t value, uint8_t mode) {
-  uint8_t highnib = value & 0xf0;
+  mode |= _backlightval;
-  uint8_t lownib = (value << 4) & 0xf0;
+  uint8_t highnib = (value & 0xf0) | mode;
+  uint8_t lownib = ((value << 4) & 0xf0) | mode;
   // Send both nibbles
-  Wire.beginTransmission(_Addr);
+  byte buffer[] = {(byte)(highnib|En), highnib, (byte)(lownib|En), lownib};
-  write4bits(highnib | mode, true);
+  I2CManager.write(_Addr, buffer, sizeof(buffer));
-  write4bits(lownib | mode, true);
-  Wire.endTransmission();
 }
 
-// write 4 bits to the HD44780 interface.  If inTransmission is false
+// write 4 bits to the HD44780 LCD controller.
-//   then the nibble will be sent in its own I2C transmission.
+void LiquidCrystal_I2C::write4bits(uint8_t value) {
-void LiquidCrystal_I2C::write4bits(uint8_t value, bool inTransmission) {
+  uint8_t _data = value | _backlightval;
-  int _data = (int)value | _backlightval;
-  if (!inTransmission) Wire.beginTransmission(_Addr);
   // Enable must be set/reset for at least 450ns.  This is well within the
   // I2C clock cycle time of 2.5us at 400kHz. Data is clocked in to the
   // HD44780 on the trailing edge of the Enable pin.
-  printIIC(_data | En);
+  byte buffer[] = {(byte)(_data|En), _data};
-  printIIC(_data);
+  I2CManager.write(_Addr, buffer, sizeof(buffer));
-  if (!inTransmission) Wire.endTransmission();
 }
 
-// write a byte to the PCF8574 I2C interface
+// write a byte to the PCF8574 I2C interface.  We don't need to set
+// the enable pin for this.
 void LiquidCrystal_I2C::expanderWrite(uint8_t value) {
-  int _data = (int)value | _backlightval;
+  I2CManager.write(_Addr, 1, value | _backlightval);
-  Wire.beginTransmission(_Addr);
-  printIIC(_data);
-  Wire.endTransmission();
 }

LiquidCrystal_I2C.h

@@ -21,9 +21,7 @@
 #ifndef LiquidCrystal_I2C_h
 #define LiquidCrystal_I2C_h
 
-#include <inttypes.h>
+#include <Arduino.h>
-#include "Print.h" 
-#include <Wire.h>
 
 // commands
 #define LCD_CLEARDISPLAY 0x01
@@ -82,25 +80,15 @@ public:
   void backlight();
   
   void setCursor(uint8_t, uint8_t); 
-#if defined(ARDUINO) && ARDUINO >= 100
   virtual size_t write(uint8_t);
-#else
-  virtual void write(uint8_t);
-#endif
   void command(uint8_t);
   void init();
-  void oled_init();
-
-////compatibility API function aliases
-void setBacklight(uint8_t new_val);				// alias for backlight() and nobacklight()
-void printstr(const char[]);
 
 private:
   void init_priv();
   void send(uint8_t, uint8_t);
-  void write4bits(uint8_t, bool inTransmission=false);
+  void write4bits(uint8_t);
   void expanderWrite(uint8_t);
-  void pulseEnable(uint8_t);
   uint8_t _Addr;
   uint8_t _displayfunction;
   uint8_t _displaycontrol;

PWMServoDriver.cpp

@@ -23,7 +23,6 @@
  *  BSD license, all text above must be included in any redistribution
  */
 #include <Arduino.h>
-#include <Wire.h>
 #include "PWMServoDriver.h"
 #include "DIAG.h"
 #include "I2CManager.h"
@@ -60,7 +59,7 @@ bool PWMServoDriver::setup(int board) {
   uint8_t i2caddr=PCA9685_I2C_ADDRESS + board;
 
   // Test if device is available
-  byte error = I2CManager.exists(i2caddr);
+  byte error = I2CManager.checkAddress(i2caddr);
   if (error) {
     DIAG(F("I2C Servo device 0x%x Not Found %d"),i2caddr, error);
     failFlags|=1<<board;  
@@ -85,20 +84,14 @@ void PWMServoDriver::setServo(byte servoNum, uint16_t value) {
   
   if (setup(board)) {
     DIAG(F("SetServo %d %d"),servoNum,value);  
-    Wire.beginTransmission(PCA9685_I2C_ADDRESS + board);
+    uint8_t buffer[] = {(uint8_t)(PCA9685_FIRST_SERVO + 4 * pin), // 4 registers per pin
-    Wire.write(PCA9685_FIRST_SERVO + 4 * pin); // 4 registers per pin
+      0, 0, (uint8_t)(value & 0xff), (uint8_t)(value >> 8)};
-    Wire.write(0);
+    if (value == 4095) buffer[2] = 0x10;   // Full on
-    Wire.write(0);
+    byte error=I2CManager.write(PCA9685_I2C_ADDRESS + board, buffer, sizeof(buffer));
-    Wire.write(value);
-    Wire.write(value >> 8);
-    byte error=Wire.endTransmission();
     if (error!=0) DIAG(F("SetServo error %d"),error); 
   }
 }
 
 void PWMServoDriver::writeRegister(uint8_t i2caddr,uint8_t hardwareRegister, uint8_t d) {
-  Wire.beginTransmission(i2caddr);
+  I2CManager.write(i2caddr, 2, hardwareRegister, d);
-  Wire.write(hardwareRegister);
-  Wire.write(d);
-  Wire.endTransmission();
 }

SSD1306Ascii.cpp

@@ -16,27 +16,38 @@
  * <http://www.gnu.org/licenses/>.
  */
 #include "SSD1306Ascii.h"
+#include "I2CManager.h"
+#include "FSH.h"
+
+
+// Maximum number of bytes we can send per transmission is 32.
+const uint8_t FLASH SSD1306AsciiWire::blankPixels[32] = 
+  {0x40,        // First byte specifies data mode
+  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};  
 
 //==============================================================================
-// SSD1306Ascii Method Definitions
+// SSD1306AsciiWire Method Definitions
-
 //------------------------------------------------------------------------------
-void SSD1306Ascii::clear() {
+void SSD1306AsciiWire::clear() {
   clear(0, displayWidth() - 1, 0, displayRows() - 1);
 }
 //------------------------------------------------------------------------------
-void SSD1306Ascii::clear(uint8_t c0, uint8_t c1, uint8_t r0, uint8_t r1) {
+void SSD1306AsciiWire::clear(uint8_t columnStart, uint8_t columnEnd, 
+                             uint8_t rowStart, uint8_t rowEnd) {
+  const int maxBytes = sizeof(blankPixels);  // max number of bytes sendable over Wire
   // Ensure only rows on display will be cleared.
-  if (r1 >= displayRows()) r1 = displayRows() - 1;
+  if (rowEnd >= displayRows()) rowEnd = displayRows() - 1;
-
+  for (uint8_t r = rowStart; r <= rowEnd; r++) {
-  for (uint8_t r = r0; r <= r1; r++) {
+    setCursor(columnStart, r);   // Position at start of row to be erased
-    setCursor(c0, r);
+    for (uint8_t c = columnStart; c <= columnEnd; c += maxBytes-1) {
-    for (uint8_t c = c0; c <= c1; c++) ssd1306WriteRamBuf(0);
+      uint8_t len = min((uint8_t)(columnEnd-c+1), maxBytes-1) + 1;
+      I2CManager.write_P(m_i2cAddr, blankPixels, len);  // Write up to 31 blank columns
+    }
   }
-  setCursor(c0, r0);
 }
 //------------------------------------------------------------------------------
-void SSD1306Ascii::init(const DevType* dev) {
+void SSD1306AsciiWire::begin(const DevType* dev, uint8_t i2cAddr) {
+  m_i2cAddr = i2cAddr;
   m_col = 0;
   m_row = 0;
 #ifdef __AVR__
@@ -48,125 +59,50 @@ void SSD1306Ascii::init(const DevType* dev) {
   m_displayWidth = readFontByte(&dev->lcdWidth);
   m_displayHeight = readFontByte(&dev->lcdHeight);
   m_colOffset = readFontByte(&dev->colOffset);
-  for (uint8_t i = 0; i < size; i++) {
+  I2CManager.write_P(m_i2cAddr, table, size);
-    ssd1306WriteCmd(readFontByte(table + i));
-  }
-  clear();
 }
 //------------------------------------------------------------------------------
-void SSD1306Ascii::setCol(uint8_t col) {
+void SSD1306AsciiWire::setContrast(uint8_t value) {
-  if (col < m_displayWidth) {
+  I2CManager.write(m_i2cAddr, 2, 
-    m_col = col;
+    0x00,     // Set to command mode
-    col += m_colOffset;
+    SSD1306_SETCONTRAST, value);
-    ssd1306WriteCmd(SSD1306_SETLOWCOLUMN | (col & 0XF));
+}
-    ssd1306WriteCmd(SSD1306_SETHIGHCOLUMN | (col >> 4));
+//------------------------------------------------------------------------------
+void SSD1306AsciiWire::setCursor(uint8_t col, uint8_t row) {
+  if (row < displayRows() && col < m_displayWidth) {
+    m_row = row;
+    m_col = col + m_colOffset;
+    I2CManager.write(m_i2cAddr, 4,
+      0x00,    // Set to command mode
+      SSD1306_SETLOWCOLUMN | (col & 0XF), 
+      SSD1306_SETHIGHCOLUMN | (col >> 4),
+      SSD1306_SETSTARTPAGE | m_row);
   }
 }
 //------------------------------------------------------------------------------
-void SSD1306Ascii::setContrast(uint8_t value) {
+void SSD1306AsciiWire::setFont(const uint8_t* font) {
-  ssd1306WriteCmd(SSD1306_SETCONTRAST);
-  ssd1306WriteCmd(value);
-}
-//------------------------------------------------------------------------------
-void SSD1306Ascii::setCursor(uint8_t col, uint8_t row) {
-  setCol(col);
-  setRow(row);
-}
-//------------------------------------------------------------------------------
-void SSD1306Ascii::setFont(const uint8_t* font) {
   m_font = font;
   m_fontFirstChar = readFontByte(m_font + FONT_FIRST_CHAR);
   m_fontCharCount = readFontByte(m_font + FONT_CHAR_COUNT);
 }
 //------------------------------------------------------------------------------
-void SSD1306Ascii::setRow(uint8_t row) {
+size_t SSD1306AsciiWire::write(uint8_t ch) {
-  if (row < displayRows()) {
-    m_row = row;
-    ssd1306WriteCmd(SSD1306_SETSTARTPAGE | m_row);
-  }
-}
-//------------------------------------------------------------------------------
-void SSD1306Ascii::ssd1306WriteRam(uint8_t c) {
-  if (m_col < m_displayWidth) {
-    writeDisplay(c, SSD1306_MODE_RAM);
-    m_col++;
-  }
-}
-//------------------------------------------------------------------------------
-void SSD1306Ascii::ssd1306WriteRamBuf(uint8_t c) {
-  if (m_col < m_displayWidth) {
-    writeDisplay(c, SSD1306_MODE_RAM_BUF);
-    m_col++;
-  }
-}
-//------------------------------------------------------------------------------
-size_t SSD1306Ascii::write(uint8_t ch) {
-  if (!m_font) {
-    return 0;
-  }
   const uint8_t* base = m_font + FONT_WIDTH_TABLE;
 
   if (ch < m_fontFirstChar || ch >= (m_fontFirstChar + m_fontCharCount))
     return 0;
   ch -= m_fontFirstChar;
   base += fontWidth * ch;
-  for (uint8_t c = 0; c < fontWidth; c++) {
+  uint8_t buffer[1+fontWidth+letterSpacing];
-    uint8_t b = readFontByte(base + c);
+  buffer[0] = 0x40;     // set SSD1306 controller to data mode
-    ssd1306WriteRamBuf(b);
+  uint8_t bufferPos = 1;
-  }
+  // Copy character pixel columns
-  for (uint8_t i = 0; i < letterSpacing; i++) {
+  for (uint8_t i = 0; i < fontWidth; i++) 
-    ssd1306WriteRamBuf(0);
+    buffer[bufferPos++] = readFontByte(base++);
-  }
+  // Add blank pixels between letters
-  flushDisplay();
+  for (uint8_t i = 0; i < letterSpacing; i++) 
+    buffer[bufferPos++] = 0;
+  // Write the data to I2C display
+  I2CManager.write(m_i2cAddr, buffer, bufferPos);
   return 1;
 }
-
-//=============================================================================
-// SSD1306AsciiWire method definitions
-
-#define m_oledWire Wire
-
-void SSD1306AsciiWire::begin(const DevType* dev, uint8_t i2cAddr) {
-#if OPTIMIZE_I2C
-  m_nData = 0;
-#endif  // OPTIMIZE_I2C
-  m_i2cAddr = i2cAddr;
-  init(dev);
-}
-
-//------------------------------------------------------------------------------
-void SSD1306AsciiWire::writeDisplay(uint8_t b, uint8_t mode) {
-#if OPTIMIZE_I2C
-  if (m_nData > 16 || (m_nData && mode == SSD1306_MODE_CMD)) {
-    m_oledWire.endTransmission();
-    m_nData = 0;
-  }
-  if (m_nData == 0) {
-    m_oledWire.beginTransmission(m_i2cAddr);
-    m_oledWire.write(mode == SSD1306_MODE_CMD ? 0X00 : 0X40);
-  }
-  m_oledWire.write(b);
-  if (mode == SSD1306_MODE_RAM_BUF) {
-    m_nData++;
-  } else {
-    m_oledWire.endTransmission();
-    m_nData = 0;
-  }
-#else   // OPTIMIZE_I2C
-  m_oledWire.beginTransmission(m_i2cAddr);
-  m_oledWire.write(mode == SSD1306_MODE_CMD ? 0X00 : 0X40);
-  m_oledWire.write(b);
-  m_oledWire.endTransmission();
-#endif  // OPTIMIZE_I2C
-}
-
-//------------------------------------------------------------------------------
-void SSD1306AsciiWire::flushDisplay() {
-#if OPTIMIZE_I2C
-  if (m_nData) {
-    m_oledWire.endTransmission();
-    m_nData = 0;
-  }
-#endif  // OPTIMIZE_I2C
-}
-//------------------------------------------------------------------------------

SSD1306Ascii.h

@@ -12,127 +12,41 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SSD1306Ascii Library.  If not, see
+ * along with this software.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-/**
- * @file SSD1306AsciiWire.h
- * @brief Class for I2C displays using Wire.
- */
-#ifndef SSD1306AsciiWire_h
-#define SSD1306AsciiWire_h
 
-#include <Wire.h>
+#ifndef SSD1306Ascii_h
+#define SSD1306Ascii_h
 
 #include "Arduino.h"
-#include "LCDDisplay.h"
 #include "SSD1306font.h"
 #include "SSD1306init.h"
 
-//------------------------------------------------------------------------------
+class SSD1306AsciiWire : public Print {
-/** SSD1306Ascii version basis */
-#define SDD1306_ASCII_VERSION 1.3.0
-//------------------------------------------------------------------------------
-// Configuration options.
-
-/** Use larger faster I2C code. */
-#define OPTIMIZE_I2C 1
-
-//------------------------------------------------------------------------------
-// Values for writeDisplay() mode parameter.
-/** Write to Command register. */
-#define SSD1306_MODE_CMD 0
-/** Write one byte to display RAM. */
-#define SSD1306_MODE_RAM 1
-/** Write to display RAM with possible buffering. */
-#define SSD1306_MODE_RAM_BUF 2
-//------------------------------------------------------------------------------
-
-/**
- * @class SSD1306Ascii
- * @brief SSD1306 base class
- */
-class SSD1306Ascii : public Print {
  public:
   using Print::write;
-  SSD1306Ascii() {}
+  SSD1306AsciiWire() {}
-  /**
+  // Initialize the display controller.
-   * @brief Clear the display and set the cursor to (0, 0).
+  void begin(const DevType* dev, uint8_t i2cAddr);
-   */
+  // Clear the display and set the cursor to (0, 0).
   void clear();
-  /**
+  // Clear a region of the display.
-   * @brief Clear a region of the display.
-   *
-   * @param[in] c0 Starting column.
-   * @param[in] c1 Ending column.
-   * @param[in] r0 Starting row;
-   * @param[in] r1 Ending row;
-   * @note The final cursor position will be (c0, r0).
-   */
   void clear(uint8_t c0, uint8_t c1, uint8_t r0, uint8_t r1);
-  /**
+  // The current column in pixels.
-   * @brief Clear a field of n fieldWidth() characters.
-   *
-   * @param[in] col Field start column.
-   *
-   * @param[in] row Field start row.
-   *
-   * @param[in] n Number of characters in the field.
-   *
-   */
-  void clearField(uint8_t col, uint8_t row, uint8_t n);
-  /**
-   * @brief Clear the display to the end of the current line.
-   * @note The number of rows cleared will be determined by the height
-   *       of the current font.
-   * @note The cursor will be returned to the original position.
-   */
-  void clearToEOL();
-  /**
-   * @return The current column in pixels.
-   */
   inline uint8_t col() const { return m_col; }
-  /**
+  // The display hight in pixels.
-   * @return The display hight in pixels.
-   */
   inline uint8_t displayHeight() const { return m_displayHeight; }
-  /**
+  // The display height in rows with eight pixels to a row.
-   * @brief Set display to normal or 180 degree remap mode.
-   *
-   * @param[in] mode true for normal mode, false for remap mode.
-   *
-   * @note Adafruit and many ebay displays use remap mode.
-   *       Use normal mode to rotate these displays 180 degrees.
-   */
-  void displayRemap(bool mode);
-  /**
-   * @return The display height in rows with eight pixels to a row.
-   */
   inline uint8_t displayRows() const { return m_displayHeight / 8; }
-  /**
+  // The display width in pixels.
-   * @return The display width in pixels.
-   */
   inline uint8_t displayWidth() const { return m_displayWidth; }
-  /**
+  // Set the cursor position to (0, 0).
-   * @brief Set the cursor position to (0, 0).
-   */
   inline void home() { setCursor(0, 0); }
-  /**
+  // Initialize the display controller.
-   * @brief Initialize the display controller.
-   *
-   * @param[in] dev A display initialization structure.
-   */
   void init(const DevType* dev);
-  /**
+  // the current row number with eight pixels to a row.
-   * @return the current row number with eight pixels to a row.
-   */
   inline uint8_t row() const { return m_row; }
-  /**
-   * @brief Set the current column number.
-   *
-   * @param[in] col The desired column number in pixels.
-   */
-  void setCol(uint8_t col);
   /**
    * @brief Set the display contrast.
    *
@@ -152,34 +66,6 @@ class SSD1306Ascii : public Print {
    * @param[in] font Pointer to a font table.
    */
   void setFont(const uint8_t* font);
-  /**
-   * @brief Set the current row number.
-   *
-   * @param[in] row the row number in eight pixel rows.
-   */
-  void setRow(uint8_t row);
-  /**
-   * @brief Write a command byte to the display controller.
-   *
-   * @param[in] c The command byte.
-   * @note The byte will immediately be sent to the controller.
-   */
-  inline void ssd1306WriteCmd(uint8_t c) { writeDisplay(c, SSD1306_MODE_CMD); }
-  /**
-   * @brief Write a byte to RAM in the display controller.
-   *
-   * @param[in] c The data byte.
-   * @note The byte will immediately be sent to the controller.
-   */
-  void ssd1306WriteRam(uint8_t c);
-  /**
-   * @brief Write a byte to RAM in the display controller.
-   *
-   * @param[in] c The data byte.
-   * @note The byte may be buffered until a call to ssd1306WriteCmd
-   *       or ssd1306WriteRam or flushDisplay.
-   */
-  void ssd1306WriteRamBuf(uint8_t c);
   /**
    * @brief Display a character.
    *
@@ -188,47 +74,24 @@ class SSD1306Ascii : public Print {
    */
   size_t write(uint8_t c);
 
- protected:
+ private:
-  virtual void writeDisplay(uint8_t b, uint8_t mode) = 0;
-  virtual void flushDisplay() = 0;
   uint8_t m_col;                    // Cursor column.
   uint8_t m_row;                    // Cursor RAM row.
   uint8_t m_displayWidth;           // Display width.
   uint8_t m_displayHeight;          // Display height.
   uint8_t m_colOffset;              // Column offset RAM to SEG.
-  const uint8_t* m_font = nullptr;  // Current font.
+  const uint8_t* m_font = NULL;     // Current font.
 
   // Only fixed size 5x7 fonts in a 6x8 cell are supported.
-  const int fontWidth = 5;
+  const uint8_t fontWidth = 5;
-  const int fontHeight = 7;
+  const uint8_t fontHeight = 7;
   const uint8_t letterSpacing = 1;
   uint8_t m_fontFirstChar;
   uint8_t m_fontCharCount;
-};
 
-/**
- * @class SSD1306AsciiWire
- * @brief Class for I2C displays using Wire.
- */
-class SSD1306AsciiWire : public SSD1306Ascii {
- public:
-  /**
-   * @brief Initialize the display controller.
-   *
-   * @param[in] dev A device initialization structure.
-   * @param[in] i2cAddr The I2C address of the display controller.
-   */
-  void begin(const DevType* dev, uint8_t i2cAddr);
-
- protected:
-  void writeDisplay(uint8_t b, uint8_t mode);
-  void flushDisplay();
-
- protected:
   uint8_t m_i2cAddr;
-#if OPTIMIZE_I2C
+
-  uint8_t m_nData;
+  static const uint8_t blankPixels[];
-#endif  // OPTIMIZE_I2C
 };
 
-#endif  // SSD1306AsciiWire_h
+#endif  // SSD1306Ascii_h

SSD1306init.h

@@ -118,6 +118,7 @@ struct DevType {
 /** Initialization commands for a 128x32 SSD1306 oled display. */
 static const uint8_t MEM_TYPE Adafruit128x32init[] = {
     // Init sequence for Adafruit 128x32 OLED module
+    0x00,                              // Set to command mode
     SSD1306_DISPLAYOFF,
     SSD1306_SETDISPLAYCLOCKDIV, 0x80,  // the suggested ratio 0x80
     SSD1306_SETMULTIPLEX, 0x1F,        // ratio 32
@@ -148,6 +149,7 @@ static const DevType MEM_TYPE Adafruit128x32 = {
 /** Initialization commands for a 128x64 SSD1306 oled display. */
 static const uint8_t MEM_TYPE Adafruit128x64init[] = {
     // Init sequence for Adafruit 128x64 OLED module
+    0x00,                              // Set to command mode
     SSD1306_DISPLAYOFF,
     SSD1306_SETDISPLAYCLOCKDIV, 0x80,  // the suggested ratio 0x80
     SSD1306_SETMULTIPLEX, 0x3F,        // ratio 64
@@ -177,6 +179,7 @@ static const DevType MEM_TYPE Adafruit128x64 = {
 // This section is based on https://github.com/stanleyhuangyc/MultiLCD
 /** Initialization commands for a 128x64 SH1106 oled display. */
 static const uint8_t MEM_TYPE SH1106_128x64init[] = {
+  0x00,                                  // Set to command mode
   SSD1306_DISPLAYOFF,
   SSD1306_SETSTARTPAGE | 0X0,            // set page address
   SSD1306_SETCONTRAST, 0x80,             // 128