Merge branch 'master' into TrackManager

CommandDistributor.cpp

@@ -136,3 +136,8 @@ void  CommandDistributor::broadcastPower() {
   LCD(2,F("Power %S%S"),state=='1'?F("On"):F("Off"),reason);
   broadcast(true);
 }
+
+void CommandDistributor::broadcastText(const FSH * msg) {
+  StringFormatter::send(broadcastBufferWriter,F("%S"),msg);
+  broadcast(false); 
+}

CommandDistributor.h

@@ -32,6 +32,7 @@ public :
   static void broadcastSensor(int16_t id, bool value);
   static void broadcastTurnout(int16_t id, bool isClosed);
   static void broadcastPower();
+  static void broadcastText(const FSH * msg);
   static void forget(byte clientId);
 private:
   static void broadcast(bool includeWithrottleClients);

DCCEX.h

@@ -42,8 +42,9 @@
 #include "Turnouts.h"
 #include "Sensors.h"
 #include "Outputs.h"
-#include "EXRAIL.h"
 #include "CommandDistributor.h"
 #include "TrackManager.h"
 #include "DCCTimer.h"    
+#include "EXRAIL.h"
+    
 #endif

EXRAIL2.cpp

@@ -67,11 +67,11 @@ const int16_t HASH_KEYWORD_ROUTES=-3702;
 
 // One instance of RMFT clas is used for each "thread" in the automation.
 // Each thread manages a loco on a journey through the layout, and/or may manage a scenery automation.
-// The thrrads exist in a ring, each time through loop() the next thread in the ring is serviced.
+// The threads exist in a ring, each time through loop() the next thread in the ring is serviced.
 
 // Statics 
 const int16_t LOCO_ID_WAITING=-99; // waiting for loco id from prog track
-int16_t RMFT2::progtrackLocoId;  // used for callback when detecting a loco on prograck
+int16_t RMFT2::progtrackLocoId;  // used for callback when detecting a loco on prog track
 bool RMFT2::diag=false;      // <D EXRAIL ON>  
 RMFT2 * RMFT2::loopTask=NULL; // loopTask contains the address of ONE of the tasks in a ring.
 RMFT2 * RMFT2::pausingTask=NULL; // Task causing a PAUSE.
@@ -808,6 +808,12 @@ void RMFT2::loop2() {
     DCCWaveform::setJoin(false);
     CommandDistributor::broadcastPower();
     break;
+  
+  case OPCODE_POWERON:
+    DCCWaveform::mainTrack.setPowerMode(POWERMODE::ON);
+    DCC::setProgTrackSyncMain(false);
+    CommandDistributor::broadcastPower();
+    break;
     
   case OPCODE_UNJOIN:
     DCCWaveform::setJoin(false);
@@ -884,13 +890,13 @@ void RMFT2::loop2() {
     break;
     
   case OPCODE_AUTOSTART: // Handled only during begin process
-  case OPCODE_PAD: // Just a padding for previous opcode needing >1 operad byte.
+  case OPCODE_PAD: // Just a padding for previous opcode needing >1 operand byte.
   case OPCODE_TURNOUT: // Turnout definition ignored at runtime
   case OPCODE_SERVOTURNOUT: // Turnout definition ignored at runtime
   case OPCODE_PINTURNOUT: // Turnout definition ignored at runtime
-  case OPCODE_ONCLOSE: // Turnout event catcers ignored here
+  case OPCODE_ONCLOSE: // Turnout event catchers ignored here
   case OPCODE_ONTHROW:
-  case OPCODE_ONACTIVATE: // Activate event catcers ignored here
+  case OPCODE_ONACTIVATE: // Activate event catchers ignored here
   case OPCODE_ONDEACTIVATE:
     break;
     

EXRAIL2MacroReset.h

@@ -32,6 +32,7 @@
 #undef ATTIMEOUT
 #undef AUTOMATION 
 #undef AUTOSTART
+#undef BROADCAST
 #undef CALL 
 #undef CLOSE 
 #undef DEACTIVATE
@@ -124,6 +125,7 @@
 #define ATTIMEOUT(sensor_id,timeout_ms)
 #define AUTOMATION(id, description) 
 #define AUTOSTART
+#define BROADCAST(msg)
 #define CALL(route) 
 #define CLOSE(id) 
 #define DEACTIVATE(addr,subaddr)

EXRAILMacros.h

@@ -69,6 +69,8 @@ void  RMFT2::emitWithrottleDescriptions(Print * stream) {
 // Pass 3... Create Text sending functions
 #include "EXRAIL2MacroReset.h"
 const int StringMacroTracker1=__COUNTER__;
+#undef BROADCAST
+#define BROADCAST(msg) case (__COUNTER__ - StringMacroTracker1) : CommandDistributor::broadcastText(F(msg));break;
 #undef PRINT
 #define PRINT(msg)    case (__COUNTER__ - StringMacroTracker1) : printMessage2(F(msg));break;
 #undef LCN
@@ -170,6 +172,7 @@ const  FLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define ATTIMEOUT(sensor_id,timeout) OPCODE_ATTIMEOUT1,0,0,OPCODE_ATTIMEOUT2,V(sensor_id),OPCODE_PAD,V(timeout/100L),
 #define AUTOMATION(id, description)  OPCODE_AUTOMATION, V(id), 
 #define AUTOSTART OPCODE_AUTOSTART,0,0,
+#define BROADCAST(msg) PRINT(msg)
 #define CALL(route) OPCODE_CALL,V(route),
 #define CLOSE(id)  OPCODE_CLOSE,V(id),
 #define DEACTIVATE(addr,subaddr) OPCODE_DCCACTIVATE,V(addr<<3 | subaddr<<1),

WiThrottle.cpp

@@ -519,25 +519,32 @@ char         WiThrottle::stashThrottleChar;
 void WiThrottle::getLocoCallback(int16_t locoid) {
   stashStream->mark(stashClient);
   
-  if (locoid<=0)
+  if (locoid<=0) {
     StringFormatter::send(stashStream,F("HMNo loco found on prog track\n"));
-  else {
-    // short or long
-    char addrchar;
-    if (locoid & LONG_ADDR_MARKER) { // long addr
-      locoid = locoid ^ LONG_ADDR_MARKER;
-      addrchar = 'L';
-    } else
-      addrchar = 'S';
-    if (addrchar == 'L' && locoid <= HIGHEST_SHORT_ADDR )
-      StringFormatter::send(stashStream,F("HMLong addr %d <= %d not supported\n"), locoid,HIGHEST_SHORT_ADDR);
-    else {
-      char addcmd[20]={'M',stashThrottleChar,'+', addrchar};
-      itoa(locoid,addcmd+4,10);
-      stashInstance->multithrottle(stashStream, (byte *)addcmd);
-      TrackManager::setMainPower(POWERMODE::ON);
-      DCCWaveform::setJoin(true);  // <1 JOIN> so we can drive loco away
-    }
+    stashStream->commit();                  // done here, commit and return
+    return;
   }
+
+  // short or long
+  char addrchar;
+  if (locoid & LONG_ADDR_MARKER) {          // maker bit indicates long addr
+    locoid = locoid ^ LONG_ADDR_MARKER;     // remove marker bit to get real long addr
+    if (locoid <= HIGHEST_SHORT_ADDR ) {    // out of range for long addr
+      StringFormatter::send(stashStream,F("HMLong addr %d <= %d unsupported\n"), locoid, HIGHEST_SHORT_ADDR);
+      stashStream->commit();                // done here, commit and return
+      return;
+    }
+    addrchar = 'L';
+  } else {
+    addrchar = 'S';
+  }
+  
+  char addcmd[20]={'M',stashThrottleChar,'+', addrchar};
+  itoa(locoid,addcmd+4,10);
+  stashInstance->multithrottle(stashStream, (byte *)addcmd);
+  DCCWaveform::progTrack.setPowerMode(POWERMODE::ON);
+  DCC::setProgTrackSyncMain(true);          // <1 JOIN> so we can drive loco away
   stashStream->commit();
+  CommandDistributor::broadcastPower();
+
 }

config.example.h

@@ -29,7 +29,7 @@ The configuration file for DCC-EX Command Station
 /////////////////////////////////////////////////////////////////////////////////////
 //  NOTE: Before connecting these boards and selecting one in this software
 //        check the quick install guides!!! Some of these boards require a voltage
-//        generating resitor on the current sense pin of the device. Failure to select
+//        generating resistor on the current sense pin of the device. Failure to select
 //        the correct resistor could damage the sense pin on your Arduino or destroy
 //        the device.
 //
@@ -85,7 +85,7 @@ The configuration file for DCC-EX Command Station
 // WIFI_PASSWORD is the network password for your home network or if
 // you want to change the password from default AP mode password
 // to the AP password you want. 
-// Your password may not conain ``"'' (double quote, ASCII 0x22).
+// Your password may not contain ``"'' (double quote, ASCII 0x22).
 #define WIFI_PASSWORD "Your network passwd"
 //
 // WIFI_HOSTNAME: You probably don't need to change this
@@ -129,6 +129,9 @@ The configuration file for DCC-EX Command Station
 // #define OLED_DRIVER 128,32
 
 // Define scroll mode as 0, 1 or 2
+//  *  #define SCROLLMODE 0 is scroll continuous (fill screen if poss),
+//  *  #define SCROLLMODE 1 is by page (alternate between pages),
+//  *  #define SCROLLMODE 2 is by row (move up 1 row at a time).
 #define SCROLLMODE 1
 
 /////////////////////////////////////////////////////////////////////////////////////
@@ -137,7 +140,7 @@ The configuration file for DCC-EX Command Station
 // If you do not need the EEPROM at all, you can disable all the code that saves
 // data in the EEPROM. You might want to do that if you are in a Arduino UNO
 // and want to use the EX-RAIL automation. Otherwise you do not have enough RAM
-// to do that. Of course, then none of the EEPROM related commands works.
+// to do that. Of course, then none of the EEPROM related commands work.
 //
 // #define DISABLE_EEPROM
 
@@ -174,7 +177,7 @@ The configuration file for DCC-EX Command Station
 
 // If you have issues with that the direction of the accessory commands is
 // reversed (for example when converting from another CS to DCC-EX) then
-// you can use this to revese the sense of all accessory commmands sent
+// you can use this to reverse the sense of all accessory commmands sent
 // over DCC++. This #define likewise inverts the behaviour of the <a> command
 // for triggering DCC Accessory Decoders, so that <a addr subaddr 0> generates a
 // DCC packet with D=1 (close turnout) and <a addr subaddr 1> generates D=0 

myAutomation.example.h

@@ -1,19 +1,18 @@
 /* This is an automation example file.
  *  The presence of a file called "myAutomation.h" brings EX-RAIL code into
  *  the command station.
- *  The auotomation may have multiple concurrent tasks. 
+ *  The automation may have multiple concurrent tasks.
  *  A task may 
  *  - Act as a ROUTE setup macro for a user to drive over 
  *  - drive a loco through an AUTOMATION 
  *  - automate some cosmetic part of the layout without any loco.
  *  
- *  At startup, a single task is created to execute the first 
- *  instruction after E$XRAIL. 
+ *  At startup, a single task is created to execute the startup sequence.
  *  This task may simply follow a route, or may START  
- *  further tasks (thats is.. send a loco out along a route).
+ *  further tasks (that is.. send a loco out along a route).
  *  
  *  Where the loco id is not known at compile time, a new task 
- *  can be creatd with the command:
+ *  can be created with the command:
  *  </ START [cab] route> 
  *  
  *  A ROUTE, AUTOMATION or SEQUENCE are internally identical in ExRail terms  
@@ -24,11 +23,10 @@
  *  
  */
 
-EXRAIL   // myAutomation must start with the EXRAIL instruction
-  // This is the default starting route, AKA SEQUENCE(0)  
-  SENDLOCO(3,1) // send loco 3 off along route 1
-  SENDLOCO(10,2) // send loco 10 off along route 2
-  DONE     // This just ends the startup thread, leaving 2 others running.
+// This is the startup sequence, AKA SEQUENCE(0)
+SENDLOCO(3,1) // send loco 3 off along route 1
+SENDLOCO(10,2) // send loco 10 off along route 2
+DONE     // This just ends the startup thread, leaving 2 others running.
 
 /* SEQUENCE(1) is a simple shuttle between 2 sensors      
  *  S20 and S21 are sensors on arduino pins 20 and 21 
@@ -78,7 +76,3 @@ EXRAIL   // myAutomation must start with the EXRAIL instruction
    AT(33) STOP
    DELAY(20000)  // wait 20 seconds 
    FOLLOW(2)   // follow sequence 2... ie repeat the process
-   
-   ENDEXRAIL    // marks the end of the EXRAIL program. 
-    
-   

version.h

@@ -3,7 +3,9 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "4.0.0"
+#define VERSION "4.0.1"
+// 4.0.1 EXRAIL BROADCAST("msg") 
+//       EXRAIL POWERON
 // 4.0.0 Major functional and non-functional changes.
 //       Engine Driver "DriveAway" feature enhancement
 //.......JMRI feature enhancement. Provides for multiple additional DCC++EX wifi