Merge branch 'master' into Ethernewt-

DCCEXParser.cpp

@@ -96,6 +96,7 @@ void DCCEXParser::loop(Stream &stream)
             buffer[bufferLength++] = ch;
         }
     }
+    Sensor::checkAll(&stream); // Update and print changes
 }
 
 int DCCEXParser::splitValues(int result[MAX_PARAMS], const byte *cmd)
@@ -359,11 +360,7 @@ void DCCEXParser::parse(Print *stream, byte *com, bool blocking)
         return;
 
     case 'Q': // SENSORS <Q>
-        Sensor::checkAll();
+        Sensor::printAll(stream);
-        for (Sensor *tt = Sensor::firstSensor; tt != NULL; tt = tt->nextSensor)
-        {
-            StringFormatter::send(stream, F("<%c %d>"), tt->active ? 'Q' : 'q', tt->data.snum);
-        }
         return;
 
     case 's': // <s>
@@ -426,7 +423,7 @@ bool DCCEXParser::parseZ(Print *stream, int params, int p[])
 
     switch (params)
     {
-
+    
     case 2: // <Z ID ACTIVATE>
     {
         Output *o = Output::get(p[0]);
@@ -438,11 +435,16 @@ bool DCCEXParser::parseZ(Print *stream, int params, int p[])
         return true;
 
     case 3: // <Z ID PIN INVERT>
-        Output::create(p[0], p[1], p[2], 1);
+        if (!Output::create(p[0], p[1], p[2], 1))
+          return false;
+        StringFormatter::send(stream, F("<O>"));
         return true;
 
     case 1: // <Z ID>
-        return Output::remove(p[0]);
+        if (!Output::remove(p[0]))
+          return false;
+        StringFormatter::send(stream, F("<O>"));
+        return true;
 
     case 0: // <Z>
     {
@@ -550,15 +552,20 @@ bool DCCEXParser::parseS(Print *stream, int params, int p[])
     switch (params)
     {
     case 3: // <S id pin pullup>  create sensor. pullUp indicator (0=LOW/1=HIGH)
-        Sensor::create(p[0], p[1], p[2]);
+        if (!Sensor::create(p[0], p[1], p[2]))
+          return false;
+        StringFormatter::send(stream, F("<O>"));
         return true;
 
     case 1: // S id> remove sensor
-        if (Sensor::remove(p[0]))
+        if (!Sensor::remove(p[0]))
-            return true;
+          return false;
-        break;
+        StringFormatter::send(stream, F("<O>"));
+        return true;
 
     case 0: // <S> lit sensor states
+	if (Sensor::firstSensor == NULL)
+	    return false;
         for (Sensor *tt = Sensor::firstSensor; tt != NULL; tt = tt->nextSensor)
         {
             StringFormatter::send(stream, F("<Q %d %d %d>"), tt->data.snum, tt->data.pin, tt->data.pullUp);

EEStore.cpp

@@ -1,3 +1,23 @@
+/*
+ *  © 2013-2016 Gregg E. Berman
+ *  © 2020, Chris Harlow. All rights reserved.
+ *  © 2020, Harald Barth.
+ *
+ *  This file is part of Asbelos DCC API
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
 #include "EEStore.h"
 #include "Turnouts.h"
 #include "Sensors.h"
@@ -77,7 +97,7 @@ void EEStore::dump(int num) {
     DIAG(F("\nAddr  0x  char\n"));
     for (int n=0 ; n<num; n++) {
 	EEPROM.get(n, b);
-	DIAG(F("%d     %x    %c\n"),n,b,isascii(b) ? b : ' ');
+	DIAG(F("%d     %x    %c\n"),n,b,isprint(b) ? b : ' ');
     }
 }
 ///////////////////////////////////////////////////////////////////////////////

Outputs.cpp

@@ -90,7 +90,6 @@ void  Output::activate(int s){
   digitalWrite(data.pin,data.oStatus ^ bitRead(data.iFlag,0));      // set state of output pin to HIGH or LOW depending on whether bit zero of iFlag is set to 0 (ACTIVE=HIGH) or 1 (ACTIVE=LOW)
   if(num>0)
     EEPROM.put(num,data.oStatus);
- 
 }
 
 ///////////////////////////////////////////////////////////////////////////////

Sensors.cpp

@@ -65,27 +65,62 @@ decide to ignore the <q ID> return and only react to <Q ID> triggers.
 
 **********************************************************************/
 
-
+#include "StringFormatter.h"
 #include "Sensors.h"
 #include "EEStore.h"
 
 
+///////////////////////////////////////////////////////////////////////////////
+//
+// checks one defined sensors and prints _changed_ sensor state
+// to stream unless stream is NULL in which case only internal
+// state is updated. Then advances to next sensor which will
+// be checked att next invocation.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
-void Sensor::checkAll(){
+void Sensor::checkAll(Print *stream){
-  
-  for(Sensor * tt=firstSensor;tt!=NULL;tt=tt->nextSensor){
-    tt->signal=tt->signal*(1.0-SENSOR_DECAY)+digitalRead(tt->data.pin)*SENSOR_DECAY;
 
-    if(!tt->active && tt->signal<0.5){
+  if (firstSensor == NULL) return;
-      tt->active=true;
+  if (readingSensor == NULL) readingSensor=firstSensor;
-    } else if(tt->active && tt->signal>0.9){
+
-      tt->active=false;
+  bool sensorstate = digitalRead(readingSensor->data.pin);
+
+  if (!sensorstate == readingSensor->active) { // active==true means sensorstate=0/false so sensor unchanged
+    // no change
+    if (readingSensor->latchdelay != 0) {
+      // enable if you want to debug contact jitter
+      //if (stream != NULL) StringFormatter::send(stream, F("JITTER %d %d\n"), 
+      //                                          readingSensor->latchdelay, readingSensor->data.snum);
+       readingSensor->latchdelay=0; // reset
     }
-  } // loop over all sensors
+  } else if (readingSensor->latchdelay < 127) { // byte, max 255, good value unknown yet
+    // change but first increase anti-jitter counter
+    readingSensor->latchdelay++;
+  } else {
+    // make the change
+    readingSensor->active = !sensorstate;
+    readingSensor->latchdelay=0; // reset 
+    if (stream != NULL) StringFormatter::send(stream, F("<%c %d>"), readingSensor->active ? 'Q' : 'q', readingSensor->data.snum);
+  }
 
+  readingSensor=readingSensor->nextSensor;
 } // Sensor::checkAll
 
+///////////////////////////////////////////////////////////////////////////////
+//
+// prints all sensor states to stream
+//
+///////////////////////////////////////////////////////////////////////////////
+
+void Sensor::printAll(Print *stream){
+
+  for(Sensor * tt=firstSensor;tt!=NULL;tt=tt->nextSensor){
+    if (stream != NULL)
+      StringFormatter::send(stream, F("<%c %d>"), tt->active ? 'Q' : 'q', tt->data.snum);
+  } // loop over all sensors
+} // Sensor::printAll
+
 ///////////////////////////////////////////////////////////////////////////////
 
 Sensor *Sensor::create(int snum, int pin, int pullUp){
@@ -108,7 +143,7 @@ Sensor *Sensor::create(int snum, int pin, int pullUp){
   tt->data.pin=pin;
   tt->data.pullUp=(pullUp==0?LOW:HIGH);
   tt->active=false;
-  tt->signal=1;
+  tt->latchdelay=0;
   pinMode(pin,INPUT);         // set mode to input
   digitalWrite(pin,pullUp);   // don't use Arduino's internal pull-up resistors for external infrared sensors --- each sensor must have its own 1K external pull-up resistor
 
@@ -137,6 +172,7 @@ bool Sensor::remove(int n){
   else
     pp->nextSensor=tt->nextSensor;
 
+  if (readingSensor==tt) readingSensor=tt->nextSensor;
   free(tt);
 
   return true;
@@ -174,3 +210,4 @@ void Sensor::store(){
 ///////////////////////////////////////////////////////////////////////////////
 
 Sensor *Sensor::firstSensor=NULL;
+Sensor *Sensor::readingSensor=NULL;

Sensors.h

@@ -31,16 +31,18 @@ struct SensorData {
 
 struct Sensor{
   static Sensor *firstSensor;
+  static Sensor *readingSensor;
   SensorData data;
   boolean active;
-  float signal;
+  byte latchdelay;
   Sensor *nextSensor;
   static void load();
   static void store();
   static Sensor *create(int, int, int);
   static Sensor* get(int);  
   static bool remove(int);  
-  static void checkAll();   
+  static void checkAll(Print *);
+  static void printAll(Print *);
 }; // Sensor
 
 #endif

WifiInterface.cpp

@@ -57,7 +57,7 @@ bool WifiInterface::setup(long serial_link_speed,
                           const __FlashStringHelper *hostname,
                           const int port) {
 
-  bool wifiUp = false;
+  wifiSerialState wifiUp = WIFI_NOAT;
 
 #if NUM_SERIAL == 0
   // no warning about unused parameters. 
@@ -75,7 +75,7 @@ bool WifiInterface::setup(long serial_link_speed,
 
 // Other serials are tried, depending on hardware.
 #if NUM_SERIAL > 1
-  if (!wifiUp)
+  if (wifiUp == WIFI_NOAT)
   {
     Serial2.begin(serial_link_speed);
     wifiUp = setup(Serial2, wifiESSID, wifiPassword, hostname, port);
@@ -83,23 +83,29 @@ bool WifiInterface::setup(long serial_link_speed,
 #endif
   
 #if NUM_SERIAL > 2
-  if (!wifiUp)
+  if (wifiUp == WIFI_NOAT)
   {
     Serial3.begin(serial_link_speed);
     wifiUp = setup(Serial3, wifiESSID, wifiPassword, hostname, port);
   }
 #endif
 
-DCCEXParser::setAtCommandCallback(ATCommand);
+  if (wifiUp == WIFI_NOAT) // here and still not AT commands found
+      return false;
 
-// CAUTION... ONLY CALL THIS ONCE 
+  DCCEXParser::setAtCommandCallback(ATCommand);
-WifiInboundHandler::setup(wifiStream);
+  // CAUTION... ONLY CALL THIS ONCE 
-  
+  WifiInboundHandler::setup(wifiStream);
-return wifiUp; 
+  if (wifiUp == WIFI_CONNECTED)
+      connected = true;
+  else
+      connected = false;
+  return connected; 
 }
 
-bool WifiInterface::setup(Stream & setupStream,  const __FlashStringHelper* SSid, const __FlashStringHelper* password,
+wifiSerialState WifiInterface::setup(Stream & setupStream,  const __FlashStringHelper* SSid, const __FlashStringHelper* password,
-                          const __FlashStringHelper* hostname,  int port) {
+				     const __FlashStringHelper* hostname,  int port) {
+  wifiSerialState wifiState;
   static uint8_t ntry = 0;
   ntry++;
 
@@ -107,20 +113,25 @@ bool WifiInterface::setup(Stream & setupStream,  const __FlashStringHelper* SSid
 
   DIAG(F("\n++ Wifi Setup Try %d ++\n"), ntry);
 
-  connected = setup2( SSid, password, hostname,  port);
+  wifiState = setup2( SSid, password, hostname,  port);
+
+  if (wifiState == WIFI_NOAT) {
+      DIAG(F("\n++ Wifi Setup NO AT ++\n"));
+      return wifiState;
+  }
  
-  if (connected) {
+  if (wifiState == WIFI_CONNECTED) {
     StringFormatter::send(wifiStream, F("ATE0\r\n")); // turn off the echo 
     checkForOK(200, OK_SEARCH, true);      
   }
 
     
-  DIAG(F("\n++ Wifi Setup %S ++\n"), connected ? F("OK") : F("FAILED"));
+  DIAG(F("\n++ Wifi Setup %S ++\n"), wifiState == WIFI_CONNECTED ? F("CONNECTED") : F("DISCONNECTED"));
-  return connected;
+  return wifiState;
 }
 
-bool WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringHelper* password,
+wifiSerialState WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringHelper* password,
-                           const __FlashStringHelper* hostname, int port) {
+				      const __FlashStringHelper* hostname, int port) {
   bool ipOK = false;
   bool oldCmd = false;
 
@@ -132,12 +143,12 @@ bool WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringH
   if (checkForOK(200,IPD_SEARCH, true)) {
     DIAG(F("\nPreconfigured Wifi already running with data waiting\n"));
    // loopstate=4;  // carry on from correct place... or not as the case may be  
-    return true; 
+    return WIFI_CONNECTED; 
   }
 
   StringFormatter::send(wifiStream, F("AT\r\n"));   // Is something here that understands AT?
   if(!checkForOK(200, OK_SEARCH, true))
-    return false;                                   // No AT compatible WiFi module here
+    return WIFI_NOAT;                               // No AT compatible WiFi module here
 
   StringFormatter::send(wifiStream, F("ATE1\r\n")); // Turn on the echo, se we can see what's happening
   checkForOK(2000, OK_SEARCH, true);                // Makes this visible on the console
@@ -223,8 +234,9 @@ bool WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringH
     if (oldCmd) {
       while (wifiStream->available()) StringFormatter::printEscape( wifiStream->read()); /// THIS IS A DIAG IN DISGUISE
 
-      StringFormatter::send(wifiStream, F("AT+CWSAP=\"DCCEX_%s\",\"PASS_%s\",1,4\r\n"), macTail, macTail);
+      int i=0;
-      checkForOK(16000, OK_SEARCH, true); // can ignore failure as AP mode may still be ok
+      do StringFormatter::send(wifiStream, F("AT+CWSAP=\"DCCEX_%s\",\"PASS_%s\",1,4\r\n"), macTail, macTail);
+      while (i++<2 && !checkForOK(16000, OK_SEARCH, true)); // do twice if necessary but ignore failure as AP mode may still be ok
       
     } else {
 
@@ -240,16 +252,16 @@ bool WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringH
   checkForOK(10000, OK_SEARCH, true); // ignore result in case it already was off
    
   StringFormatter::send(wifiStream, F("AT+CIPMUX=1\r\n")); // configure for multiple connections
-  if (!checkForOK(10000, OK_SEARCH, true)) return false;
+  if (!checkForOK(10000, OK_SEARCH, true)) return WIFI_DISCONNECTED;
 
   StringFormatter::send(wifiStream, F("AT+CIPSERVER=1,%d\r\n"), port); // turn on server on port
-  if (!checkForOK(10000, OK_SEARCH, true)) return false;
+  if (!checkForOK(10000, OK_SEARCH, true)) return WIFI_DISCONNECTED;
  
   StringFormatter::send(wifiStream, F("AT+CIFSR\r\n")); // Display  ip addresses to the DIAG 
-  if (!checkForOK(10000, OK_SEARCH, true, false)) return false;
+  if (!checkForOK(10000, OK_SEARCH, true, false)) return WIFI_DISCONNECTED;
   DIAG(F("\nPORT=%d\n"),port);
    
-  return true;
+  return WIFI_CONNECTED;
 }
 
 

WifiInterface.h

@@ -23,6 +23,8 @@
 #include <Arduino.h>
 #include <avr/pgmspace.h>
 
+enum wifiSerialState { WIFI_NOAT, WIFI_DISCONNECTED, WIFI_CONNECTED };
+
 class WifiInterface
 {
 
@@ -36,11 +38,11 @@ public:
   static void ATCommand(const byte *command);
 
 private:
-  static bool setup(Stream &setupStream, const __FlashStringHelper *SSSid, const __FlashStringHelper *password,
+  static wifiSerialState setup(Stream &setupStream, const __FlashStringHelper *SSSid, const __FlashStringHelper *password,
                     const __FlashStringHelper *hostname, int port);
   static Stream *wifiStream;
   static DCCEXParser parser;
-  static bool setup2(const __FlashStringHelper *SSSid, const __FlashStringHelper *password,
+  static wifiSerialState setup2(const __FlashStringHelper *SSSid, const __FlashStringHelper *password,
                      const __FlashStringHelper *hostname, int port);
   static bool checkForOK(const unsigned int timeout, const char *waitfor, bool echo, bool escapeEcho = true);
   static bool connected;