1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 13:21:23 +01:00

Remove myAutomation2.h

This file was never intended for release.
This commit is contained in:
Asbelos 2022-02-04 15:33:04 +00:00 committed by GitHub
parent 1ec3b173fd
commit 58ef7d25db
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -1,192 +0,0 @@
/* This is an automation example file.
* The presence of a file called "myAutomation.h" brings EX-RAIL code into
* the command station.
* The auotomation may have multiple concurrent tasks.
* A task may drive one loco through a ROUTE or may simply
* automate some other part of the layout without any loco.
*
* At startup, a single task is created to execute the first
* instruction after ROUTES.
* This task may simply follow a route, or may SCHEDULE
* further tasks (thats is.. send a loco out along a route).
*
* Where the loco id is not known at compile time, a new task
* can be creatd with the command:
* </ SCHEDULE [cab] route>
*
*/
// Include the name to pin mappings for my layout
#include "myLayout.h"
ALIAS(ROUTE_1,1)
ALIAS(UP_MOUNTAIN,8)
ALIAS(UP_MOUNTAIN_FROM_PROG,88)
ALIAS(INNER_LOOP,7)
ALIAS(INNER_FROM_PROG,77)
//EXRAIL // myAutomation must start with the EXRAIL instruction
// This is the default starting route, AKA ROUTE(0)
// START(999) // this is just a diagnostic test cycle
PRINT("started")
LCD(0,"EXRAIL RULES")
SERIAL("I had one of them but the leg fell off!")
DONE // This just ends the startup thread
/*AUTOSTART*/ ROUTE(ROUTE_1,"Close All")
LCD(1,"Bingo")
CLOSE(TOP_TURNOUT) DELAY(10)
CLOSE(Y_TURNOUT) DELAY(10)
CLOSE(MIDDLE_TURNOUT) DELAY(10)
CLOSE(JOIN_TURNOUT) DELAY(10)
CLOSE(LOWER_TURNOUT) DELAY(10)
CLOSE(CROSSOVER_TURNOUT) DELAY(10)
CLOSE(PROG_TURNOUT) DELAY(10)
PRINT("Close All completed")
ENDTASK
SEQUENCE(UP_MOUNTAIN) // starting at the lower closed turnout siding and going up the mountain
PRINT("Up Mountain started")
DELAY(10000) // wait 10 seconds
RESERVE(BLOCK_LOWER_MOUNTAIN)
CLOSE(LOWER_TURNOUT) CLOSE(JOIN_TURNOUT)
FWD(60) AT(Y_LOWER)
RESERVE(BLOCK_X_MOUNTAIN)
CLOSE(Y_TURNOUT) CLOSE(MIDDLE_TURNOUT)
FWD(40) AT(MIDDLE_C_BUFFER) STOP
FREE(BLOCK_X_MOUNTAIN) FREE(BLOCK_LOWER_MOUNTAIN)
DELAY(10000)
RESERVE(BLOCK_UPPER_MOUNTAIN) RESERVE(BLOCK_X_MOUNTAIN)
CLOSE(MIDDLE_TURNOUT) THROW(Y_TURNOUT) THROW(TOP_TURNOUT)
REV(55)
AFTER(Y_UPPER) FREE(BLOCK_X_MOUNTAIN)
REV(55) AT(TOP_T_BUFFER) STOP // At top of mountain
FREE(BLOCK_UPPER_MOUNTAIN)
DELAY(5000)
RESERVE(BLOCK_UPPER_MOUNTAIN)
THROW(TOP_TURNOUT)
FWD(60) AT(Y_UPPER)
RESERVE(BLOCK_X_MOUNTAIN)
THROW(Y_TURNOUT) CLOSE(MIDDLE_TURNOUT)
FWD(40) AT(MIDDLE_C_BUFFER) STOP
FREE(BLOCK_UPPER_MOUNTAIN) FREE(BLOCK_X_MOUNTAIN)
DELAY(6000)
RESERVE(BLOCK_LOWER_MOUNTAIN) RESERVE(BLOCK_X_MOUNTAIN)
CLOSE(MIDDLE_TURNOUT) CLOSE(Y_TURNOUT) CLOSE(JOIN_TURNOUT) CLOSE(LOWER_TURNOUT)
REV(60)
AFTER(Y_LOWER) FREE(BLOCK_X_MOUNTAIN)
AT(LOWER_C_BUFFER) STOP
FREE(BLOCK_LOWER_MOUNTAIN)
FOLLOW(UP_MOUNTAIN)
AUTOMATION(UP_MOUNTAIN_FROM_PROG,"Send up mountain from prog")
JOIN
RESERVE(BLOCK_LOWER_MOUNTAIN)
RESERVE(BLOCK_X_INNER)
RESERVE(BLOCK_X_OUTER)
// safe to cross
THROW(PROG_TURNOUT) THROW(CROSSOVER_TURNOUT) THROW(JOIN_TURNOUT)
FWD(45)
AFTER(JOIN_AFTER) STOP
CLOSE(PROG_TURNOUT) CLOSE(CROSSOVER_TURNOUT) CLOSE(JOIN_TURNOUT)
FREE(BLOCK_X_OUTER) FREE(BLOCK_X_INNER)
CLOSE(LOWER_TURNOUT)
REV(40) AT(LOWER_C_BUFFER) STOP
FREE(BLOCK_LOWER_MOUNTAIN)
FOLLOW(UP_MOUNTAIN)
SEQUENCE(INNER_LOOP)
FWD(50)
AT(CROSSOVER_INNER_BEFORE)
RESERVE(BLOCK_X_INNER)
CLOSE(CROSSOVER_TURNOUT)
FWD(50)
AFTER(CROSSOVER_INNER_AFTER)
FREE(BLOCK_X_INNER)
FOLLOW(INNER_LOOP)
// Turnout definitions
TURNOUT(TOP_TURNOUT, TOP_TURNOUT,0,"Top Station")
TURNOUT(Y_TURNOUT, Y_TURNOUT,0,"Mountain join")
TURNOUT(MIDDLE_TURNOUT, MIDDLE_TURNOUT,0,"Middle Station")
TURNOUT(JOIN_TURNOUT,JOIN_TURNOUT,0)
TURNOUT(LOWER_TURNOUT,LOWER_TURNOUT,0)
TURNOUT(CROSSOVER_TURNOUT,CROSSOVER_TURNOUT,0)
TURNOUT(PROG_TURNOUT,PROG_TURNOUT,0)
// Single slip protection
ONTHROW(2)
THROW(1)
DONE
ONCLOSE(1)
CLOSE(2)
DONE
ROUTE(61,"Call return test")
PRINT("In 61 test 1")
CALL(62)
PRINT("In 61 test 2")
CALL(62)
PRINT("In 61 test 3")
ACTIVATE(100,2)
DEACTIVATE(100,2)
DONE
SEQUENCE(62)
PRINT("In seq 62")
RETURN
ROUTE(63,"Signal test 40,41,42")
SIGNAL(40,41,42)
DELAY(2000)
RED(40)
DELAY(2000)
AMBER(40)
DELAY(2000)
GREEN(40)
FOLLOW(63)
ROUTE(64,"Func test 6772")
XFON(6772,1)
DELAY(5000)
XFOFF(6772,1)
DELAY(5000)
FOLLOW(64)
ROUTE(65,"Negative sensor test")
PRINT(" WAIT for -176")
AT(-176)
PRINT(" WAIT for 176")
AT(176)
PRINT("done")
DONE
ROUTE(123,"Activate stuff")
ACTIVATEL(5)
ACTIVATE(7,2)
DEACTIVATE(3,2)
DEACTIVATEL(6)
DONE
ONACTIVATEL(5)
PRINT("ACT 5")
DONE
ONACTIVATE(7,2)
PRINT("ACT 7,2")
DONE
ONDEACTIVATE(7,2)
PRINT("DEACT 7,2")
DONE
ONDEACTIVATEL(5)
PRINT("DEACT 5")
DONE