diff --git a/IO_I2CRailcom3.cpp b/IO_I2CRailcom3.cpp
new file mode 100644
index 0000000..9938580
--- /dev/null
+++ b/IO_I2CRailcom3.cpp
@@ -0,0 +1,134 @@
+   /*
+ *  © 2024, Henk Kruisbrink & Chris Harlow. All rights reserved.
+ *  © 2023, Neil McKechnie. All rights reserved.
+ *  
+ *  This file is part of DCC++EX API
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+/*
+ * 
+ * Dec 2023, Added NXP SC16IS752 I2C Dual UART
+ * The SC16IS752 has 64 bytes TX & RX FIFO buffer
+ * First version without interrupts from I2C UART and only RX/TX are used, interrupts may not be
+ * needed as the RX Fifo holds the reply 
+ * 
+ * Jan 2024, Issue with using both UARTs simultaniously, the secod uart seems to work  but the first transmit 
+ * corrupt data. This need more analysis and experimenatation. 
+ * Will push this driver to the dev branch with the uart fixed to 0 
+ * Both SC16IS750 (single uart) and SC16IS752 (dual uart, but only uart 0 is enable)
+ * 
+ * myHall.cpp configuration syntax:
+ * 
+ * I2CRailcom::create(1st vPin, vPins, I2C address);
+ * 
+ * myAutomation configuration
+ *  HAL(I2CRailcom, 1st vPin, vPins, I2C address)
+ * Parameters:
+ * 1st vPin     : First virtual pin that EX-Rail can control to play a sound, use PLAYSOUND command (alias of ANOUT)
+ * vPins        : Total number of virtual pins allocated (2 vPins are supported, one for each UART)
+ *                1st vPin for UART 0, 2nd for UART 1
+ * I2C Address  : I2C address of the serial controller, in 0x format
+ */
+
+#include "IODevice.h"
+#include "IO_I2CRailcom3.h"
+#include "I2CManager.h"
+#include "DIAG.h"
+#include "DCC.h"
+#include "DCCWaveform.h"
+
+
+// Debug and diagnostic defines, enable too many will result in slowing the driver
+#define DIAG_I2CRailcom
+
+I2CRailcom3::I2CRailcom3(VPIN firstVpin, int nPins, I2CAddress i2cAddress){
+    _firstVpin = firstVpin;
+    _nPins = nPins;
+    _I2CAddress = i2cAddress;
+    addDevice(this);
+   } 
+  
+void I2CRailcom3::create(VPIN firstVpin, int nPins, I2CAddress i2cAddress) {
+    if (checkNoOverlap(firstVpin, nPins, i2cAddress)) 
+    new I2CRailcom3(firstVpin,nPins,i2cAddress); 
+    }
+
+  void I2CRailcom3::_begin() {
+    I2CManager.setClock(1000000); // TODO do we need this?
+    I2CManager.begin();
+    auto exists=I2CManager.exists(_I2CAddress);
+    DIAG(F("I2CRailcom3: %s RailcomCollector %S detected"), 
+           _I2CAddress.toString(), exists?F(""):F(" NOT"));
+    if (!exists) return;
+  
+    _deviceState=DEVSTATE_NORMAL;
+    _display();
+    }
+  
+  
+  void I2CRailcom3::_loop(unsigned long currentMicros) {
+   // DIAG(F("lopper"));
+    // Read responses from device
+    if (_deviceState!=DEVSTATE_NORMAL) return;
+    
+    // have we read this cutout already?
+    // basically we only poll once per packet when railcom cutout is working
+    auto cut=DCCWaveform::getRailcomCutoutCounter();
+    if (cutoutCounter==cut) return; 
+    cutoutCounter=cut; 
+    
+    // Read data buffer from UART
+    byte inbuf[1];
+    byte queryLength[]={'?'};
+    auto state=I2CManager.read(_I2CAddress, inbuf, 1,queryLength,sizeof(queryLength)); 
+    if (state) {
+      DIAG(F("RC ? state=%d"),state);
+      return;
+    }
+    auto length=inbuf[0];
+    if (length==0) return;  // nothing to report 
+
+    byte inbuf2[length];
+    byte queryData[]={'>'};
+    state=I2CManager.read(_I2CAddress, inbuf2, length,queryData,sizeof(queryData)); 
+    if (state) {
+      DIAG(F("RC > %d state=%d"),length,state);
+      return;
+    }
+    // read triplets  blk, locohi, locolow from buffer 
+    for (byte i=0;i<length;i+=3) {
+        byte block=inbuf2[i];
+        uint16_t locoid= ((uint16_t)inbuf2[i+1])<<8 | ((uint16_t)inbuf2[i+2]);
+        DIAG(F("RC3 b=%d l=%d"),block,locoid);
+        
+        if (locoid==0) { // no locos in block
+          DCC::clearBlock(_firstVpin+block);
+        }
+        else {
+          bool exclusive=locoid & 0x8000; 
+          locoid &= 0x7FFF;
+          DCC::setLocoInBlock(locoid,_firstVpin+block,exclusive);
+        }
+    } 
+  }
+          
+ 
+  void I2CRailcom3::_display() {
+    DIAG(F("I2CRailcom3: %s blocks %d-%d  %S"), _I2CAddress.toString(), _firstVpin, _firstVpin+_nPins-1,
+      (_deviceState!=DEVSTATE_NORMAL) ? F("OFFLINE") : F(""));
+  }
+  
+  
\ No newline at end of file
diff --git a/IO_I2CRailcom3.h b/IO_I2CRailcom3.h
new file mode 100644
index 0000000..5525c0d
--- /dev/null
+++ b/IO_I2CRailcom3.h
@@ -0,0 +1,73 @@
+   /*
+ *  © 2024, Henk Kruisbrink & Chris Harlow. All rights reserved.
+ *  © 2023, Neil McKechnie. All rights reserved.
+ *  
+ *  This file is part of DCC++EX API
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+/*
+ * 
+ * Dec 2023, Added NXP SC16IS752 I2C Dual UART
+ * The SC16IS752 has 64 bytes TX & RX FIFO buffer
+ * First version without interrupts from I2C UART and only RX/TX are used, interrupts may not be
+ * needed as the RX Fifo holds the reply 
+ * 
+ * Jan 2024, Issue with using both UARTs simultaniously, the secod uart seems to work  but the first transmit 
+ * corrupt data. This need more analysis and experimenatation. 
+ * Will push this driver to the dev branch with the uart fixed to 0 
+ * Both SC16IS750 (single uart) and SC16IS752 (dual uart, but only uart 0 is enable)
+ * 
+ * myHall.cpp configuration syntax:
+ * 
+ * I2CRailcom::create(1st vPin, vPins, I2C address);
+ * 
+ * myAutomation configuration
+ *  HAL(I2CRailcom, 1st vPin, vPins, I2C address)
+ * Parameters:
+ * 1st vPin     : First virtual pin that EX-Rail can control to play a sound, use PLAYSOUND command (alias of ANOUT)
+ * vPins        : Total number of virtual pins allocated (2 vPins are supported, one for each UART)
+ *                1st vPin for UART 0, 2nd for UART 1
+ * I2C Address  : I2C address of the serial controller, in 0x format
+ */
+
+#ifndef IO_I2CRailcom3_h
+#define IO_I2CRailcom3_h
+#include "Arduino.h"
+#include "IODevice.h"
+
+// Debug and diagnostic defines, enable too many will result in slowing the driver
+#define DIAG_I2CRailcom
+
+class I2CRailcom3 : public IODevice {
+private: 
+  byte cutoutCounter;
+  public:
+  // Constructor
+  I2CRailcom3(VPIN firstVpin, int nPins, I2CAddress i2cAddress);
+  
+  static void create(VPIN firstVpin, int nPins, I2CAddress i2cAddress) ;
+  
+  void _begin() ;
+  void _loop(unsigned long currentMicros) override ;
+  void _display() override ;
+  
+private: 
+
+
+  
+};
+
+#endif // IO_I2CRailcom_h