Save progmem with DISABLE_VDPY on Uno

DCCEXParser.cpp

@@ -847,13 +847,14 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
     case 'L': // LCC interface implemented in EXRAIL parser
         break; // Will <X> if not intercepted by EXRAIL 
 
+#ifndef DISABLE_VDPY
     case '@': // JMRI saying "give me virtual LCD msgs"
         CommandDistributor::setVirtualLCDSerial(stream);
         StringFormatter::send(stream,
             F("<@ 0 0 \"DCC-EX v" VERSION "\">\n"
                "<@ 0 1 \"Lic GPLv3\">\n"));
         return; 
-
+#endif
     default: //anything else will diagnose and drop out to <X>
       if (opcode >= ' ' && opcode <= '~') {
         DIAG(F("Opcode=%c params=%d"), opcode, params);
@@ -1064,6 +1065,7 @@ bool DCCEXParser::parseS(Print *stream, int16_t params, int16_t p[])
 }
 
 bool DCCEXParser::parseC(Print *stream, int16_t params, int16_t p[]) {
+    (void)stream; // arg not used, maybe later?
     if (params == 0)
         return false;
     switch (p[0])

StringFormatter.cpp

@@ -39,8 +39,11 @@ void StringFormatter::diag( const FSH* input...) {
 
 void StringFormatter::lcd(byte row, const FSH* input...) {
   va_list args;
+#ifndef DISABLE_VDPY
   Print * virtualLCD=CommandDistributor::getVirtualLCDSerial(0,row);
-  
+#else
+  Print * virtualLCD=NULL;
+#endif
   // Issue the LCD as a diag first
   // Unless the same serial is asking for the virtual @ respomnse
   if (virtualLCD!=&USB_SERIAL) {
@@ -50,13 +53,14 @@ void StringFormatter::lcd(byte row, const FSH* input...) {
     send(&USB_SERIAL,F(" *>\n"));
   }
   
+#ifndef DISABLE_VDPY
   // send to virtual LCD collector (if any) 
   if (virtualLCD) {
     va_start(args, input);
     send2(virtualLCD,input,args);
     CommandDistributor::commitVirtualLCDSerial();
   }
-
+#endif
   DisplayInterface::setRow(row);    
   va_start(args, input);
   send2(DisplayInterface::getDisplayHandler(),input,args);
@@ -66,12 +70,14 @@ void StringFormatter::lcd2(uint8_t display, byte row, const FSH* input...) {
   va_list args;
   
    // send to virtual LCD collector (if any) 
+#ifndef DISABLE_VDPY
   Print * virtualLCD=CommandDistributor::getVirtualLCDSerial(display,row);
   if (virtualLCD) {
     va_start(args, input);
     send2(virtualLCD,input,args);
     CommandDistributor::commitVirtualLCDSerial();
   }
+#endif
 
   DisplayInterface::setRow(display, row);    
   va_start(args, input);
@@ -250,4 +256,3 @@ void StringFormatter::printHex(Print * stream,uint16_t value) {
     result[4]='\0';
      stream->print(result);
 }
- 

config.example.h

@@ -199,6 +199,18 @@ The configuration file for DCC-EX Command Station
 //
 // #define DISABLE_PROG
 
+/////////////////////////////////////////////////////////////////////////////////////
+// DISABLE / ENABLE VDPY
+//
+// The Virtual display "VDPY" feature is by default enabled everywhere
+// but on Uno and Nano. If you think you can fit it (for example
+// having disabled some of the features above) you can enable it with
+// ENABLE_VDPY. You can even disable it on all other CPUs with
+// DISABLE_VDPY
+//
+// #define DISABLE_VDPY
+// #define ENABLE_VDPY
+
 /////////////////////////////////////////////////////////////////////////////////////
 // REDEFINE WHERE SHORT/LONG ADDR break is. According to NMRA the last short address
 // is 127 and the first long address is 128. There are manufacturers which have

defines.h

@@ -219,11 +219,10 @@
 // The HAL is disabled by default on Nano and Uno platforms, because of limited flash space.
 // 
 #if defined(ARDUINO_AVR_NANO) || defined(ARDUINO_AVR_UNO)
-  #if defined(DISABLE_DIAG) && defined(DISABLE_EEPROM) && defined(DISABLE_PROG)
+#define IO_NO_HAL // HAL too big whatever you disable otherwise
-    #warning you have sacrificed DIAG for HAL
+#ifndef ENABLE_VDPY
-  #else
+#define DISABLE_VDPY
-    #define IO_NO_HAL
+#endif
-  #endif
 #endif
 
 #if __has_include ( "myAutomation.h")