LCC and signal compile-out

LCC commands in EXRAIL for OpenMRN Adapter

FIrst use of compile-out of unused features.

DCCEXParser.cpp

@@ -67,7 +67,7 @@ Once a new OPCODE is decided upon, update this list.
   k, Reserved for future use - Potentially Railcom
   K, Reserved for future use - Potentially Railcom
   l, Loco speedbyte/function map broadcast
-  L,
+  L, Reserved for LCC interface (implemented in EXRAIL)
   m,
   M, Write DCC packet
   n,
@@ -906,6 +906,9 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
         break;
 #endif
 
+    case 'L': // LCC interface implemented in EXRAIL parser
+        break; // Will <X> if not intercepted by EXRAIL 
+
     default: //anything else will diagnose and drop out to <X>
         DIAG(F("Opcode=%c params=%d"), opcode, params);
         for (int i = 0; i < params; i++)

EXRAIL2.cpp

@@ -85,7 +85,7 @@ RMFT2 * RMFT2::pausingTask=NULL; // Task causing a PAUSE.
  // when pausingTask is set, that is the ONLY task that gets any service,
  // and all others will have their locos stopped, then resumed after the pausing task resumes.
 byte RMFT2::flags[MAX_FLAGS];
-
+Print * RMFT2::LCCSerial=0;
 LookList *  RMFT2::sequenceLookup=NULL;
 LookList *  RMFT2::onThrowLookup=NULL;
 LookList *  RMFT2::onCloseLookup=NULL;
@@ -176,23 +176,26 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
   onCloseLookup=LookListLoader(OPCODE_ONCLOSE);
   onActivateLookup=LookListLoader(OPCODE_ONACTIVATE);
   onDeactivateLookup=LookListLoader(OPCODE_ONDEACTIVATE);
-  onRedLookup=LookListLoader(OPCODE_ONRED);
-  onAmberLookup=LookListLoader(OPCODE_ONAMBER);
-  onGreenLookup=LookListLoader(OPCODE_ONGREEN);
   onChangeLookup=LookListLoader(OPCODE_ONCHANGE);
   onClockLookup=LookListLoader(OPCODE_ONTIME);
 #ifndef IO_NO_HAL
   onRotateLookup=LookListLoader(OPCODE_ONROTATE);
 #endif
   onOverloadLookup=LookListLoader(OPCODE_ONOVERLOAD);
+  // onLCCLookup is not the same so not loaded here. 
 
   // Second pass startup, define any turnouts or servos, set signals red
   // add sequences onRoutines to the lookups
+if (compileFeatures & FEATURE_SIGNAL) {
+  onRedLookup=LookListLoader(OPCODE_ONRED);
+  onAmberLookup=LookListLoader(OPCODE_ONAMBER);
+  onGreenLookup=LookListLoader(OPCODE_ONGREEN);
   for (int sigslot=0;;sigslot++) {
     VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
     if (sigid==0) break;  // end of signal list
     doSignal(sigid & SIGNAL_ID_MASK, SIGNAL_RED);
   }
+  }
 
   int progCounter;
   for (progCounter=0;; SKIPOP){
@@ -343,13 +346,65 @@ void RMFT2::ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16
     reject=!parseSlash(stream,paramCount,p);
     opcode=0;
     break;
+  case 'L':
+    if (compileFeatures & FEATURE_LCC) { 
+      // This entire code block is compiled out if LLC macros not used 
+    if (paramCount==0) {  //<L>  LCC adapter introducing self
+      LCCSerial=stream;   // now we know where to send events we raise
+
+      // loop through all possible sent events 
+      for (int progCounter=0;; SKIPOP) {
+        byte opcode=GET_OPCODE;
+        if (opcode==OPCODE_ENDEXRAIL) break;
+        if (opcode==OPCODE_LCC)  StringFormatter::send(stream,F("<LS x%h>\n"),getOperand(progCounter,0));   
+        if (opcode==OPCODE_LCCX) { // long form LCC
+           StringFormatter::send(stream,F("<LS x%h%h%h%h>\n"),
+                 getOperand(progCounter,1),
+                 getOperand(progCounter,2),
+                 getOperand(progCounter,3),
+                 getOperand(progCounter,0)
+                 );        
+        }}
+      
+      // we stream the hex events we wish to listen to
+      // and at the same time build the event index looku.
+      
+      
+      int eventIndex=0;
+      for (int progCounter=0;; SKIPOP) {
+        byte opcode=GET_OPCODE;
+        if (opcode==OPCODE_ENDEXRAIL) break;
+        if (opcode==OPCODE_ONLCC) {
+           onLCCLookup[eventIndex]=progCounter; // TODO skip...
+           StringFormatter::send(stream,F("<LL %d x%h%h%h:%h>\n"),
+                 eventIndex,
+                 getOperand(progCounter,1),
+                 getOperand(progCounter,2),
+                 getOperand(progCounter,3),
+                 getOperand(progCounter,0)
+                 );   
+           eventIndex++;      
+        }
+      }
+      StringFormatter::send(stream,F("<LR>\n")); // Ready to rumble
+      opcode=0;
+      break;
+    }
+    if (paramCount==1) {  // <L eventid> LCC event arrived from adapter
+        int16_t eventid=p[0];
+        reject=eventid<0 || eventid>=countLCCLookup;
+        if (!reject)  startNonRecursiveTask(F("LCC"),eventid,onLCCLookup[eventid]);
+        opcode=0;
+    }
+    }
+    break; 
 
   default:  // other commands pass through
     break;
   }
   if (reject) {
     opcode=0;
-    StringFormatter::send(stream,F("<X>"));
+    StringFormatter::send(stream,F("<X>\n"));
   }
 }
 
@@ -377,6 +432,8 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
 	      if (flag & LATCH_FLAG) StringFormatter::send(stream,F(" LATCHED"));
       }
     }
+
+    if (compileFeatures & FEATURE_SIGNAL) {
       // do the signals
       // flags[n] represents the state of the nth signal in the table 
       for (int sigslot=0;;sigslot++) {
@@ -387,7 +444,7 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
           (flag == SIGNAL_RED)? F("RED") : (flag==SIGNAL_GREEN) ? F("GREEN") : F("AMBER"),
           sigid & SIGNAL_ID_MASK); 
       } 
-    
+    }
     StringFormatter::send(stream,F(" *>\n"));
     return true;
   }
@@ -1035,6 +1092,20 @@ void RMFT2::loop2() {
     }
     break;
 
+  case OPCODE_LCC:  // short form LCC
+      if ((compileFeatures & FEATURE_LCC) && LCCSerial) 
+          StringFormatter::send(LCCSerial,F("<L x%h>"),(uint16_t)operand);
+       break; 
+
+  case OPCODE_LCCX: // long form LCC
+       if ((compileFeatures & FEATURE_LCC) && LCCSerial)
+            StringFormatter::send(LCCSerial,F("<L x%h%h%h%h>\n"),
+                 getOperand(progCounter,1),
+                 getOperand(progCounter,2),
+                 getOperand(progCounter,3),
+                 getOperand(progCounter,0)
+                 );    
+        break;  
     
   case OPCODE_SERVO: // OPCODE_SERVO,V(vpin),OPCODE_PAD,V(position),OPCODE_PAD,V(profile),OPCODE_PAD,V(duration)
     IODevice::writeAnalogue(operand,getOperand(1),getOperand(2),getOperand(3));
@@ -1072,6 +1143,7 @@ void RMFT2::loop2() {
   case OPCODE_SERVOTURNOUT: // Turnout definition ignored at runtime
   case OPCODE_PINTURNOUT: // Turnout definition ignored at runtime
   case OPCODE_ONCLOSE: // Turnout event catchers ignored here
+  case OPCODE_ONLCC:   // LCC event catchers ignored here 
   case OPCODE_ONTHROW:
   case OPCODE_ONACTIVATE: // Activate event catchers ignored here
   case OPCODE_ONDEACTIVATE:
@@ -1141,6 +1213,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
 }
 
 /* static */ void RMFT2::doSignal(int16_t id,char rag) {
+  if (!(compileFeatures & FEATURE_SIGNAL)) return; // dont compile code below
   if (diag) DIAG(F(" doSignal %d %x"),id,rag);
   
   // Schedule any event handler for this signal change.
@@ -1208,6 +1281,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
 }
 
 /* static */ bool RMFT2::isSignal(int16_t id,char rag) {
+  if (!(compileFeatures & FEATURE_SIGNAL)) return false; 
   int16_t sigslot=getSignalSlot(id);
   if (sigslot<0) return false; 
   return (flags[sigslot] & SIGNAL_MASK) == rag;
@@ -1260,8 +1334,10 @@ void RMFT2::powerEvent(int16_t track, bool overload) {
 
 void RMFT2::handleEvent(const FSH* reason,LookList* handlers, int16_t id) {
   int pc= handlers->find(id);
-  if (pc<0) return;
+  if (pc>=0) startNonRecursiveTask(reason,id,pc);
+}
 
+void RMFT2::startNonRecursiveTask(const FSH* reason, int16_t id,int pc) {  
   // Check we dont already have a task running this handler
   RMFT2 * task=loopTask;
   while(task) {

EXRAIL2.h

@@ -66,6 +66,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
              OPCODE_ONTIME,
              OPCODE_TTADDPOSITION,OPCODE_DCCTURNTABLE,OPCODE_EXTTTURNTABLE,
              OPCODE_ONROTATE,OPCODE_ROTATE,OPCODE_WAITFORTT,
+             OPCODE_LCC,OPCODE_LCCX,OPCODE_ONLCC,
              OPCODE_ONOVERLOAD,
 
              // OPcodes below this point are skip-nesting IF operations
@@ -94,6 +95,10 @@ enum thrunger: byte {
   thrunge_lcd,  // Must be last!!
   };
 
+  // Flag bits for compile time features.
+  static const byte FEATURE_SIGNAL= 0x80;
+  static const byte FEATURE_LCC   = 0x40;
+  static const byte FEATURE_ROSTER= 0x20;
   
  
   // Flag bits for status of hardware and TPL
@@ -173,6 +178,7 @@ private:
                       OPCODE op2=OPCODE_ENDEXRAIL,OPCODE op3=OPCODE_ENDEXRAIL);
     static void handleEvent(const FSH* reason,LookList* handlers, int16_t id);
     static uint16_t getOperand(int progCounter,byte n);
+    static void startNonRecursiveTask(const FSH* reason, int16_t id,int pc);
     static RMFT2 * loopTask;
     static RMFT2 * pausingTask;
     void delayMe(long millisecs);
@@ -191,6 +197,7 @@ private:
    static const  HIGHFLASH  byte RouteCode[];
    static const  HIGHFLASH  int16_t SignalDefinitions[];
    static byte flags[MAX_FLAGS];
+   static Print * LCCSerial;
    static LookList * sequenceLookup;
    static LookList * onThrowLookup;
    static LookList * onCloseLookup;
@@ -206,6 +213,10 @@ private:
 #endif
    static LookList * onOverloadLookup;
    
+   static const int countLCCLookup;
+   static int onLCCLookup[];
+   static const byte compileFeatures;
+    
   // Local variables - exist for each instance/task 
     RMFT2 *next;   // loop chain 
     int progCounter;    // Byte offset of next route opcode in ROUTES table

EXRAIL2MacroReset.h

@@ -86,6 +86,8 @@
 #undef LATCH 
 #undef LCD 
 #undef SCREEN
+#undef LCC 
+#undef LCCX 
 #undef LCN 
 #undef MOVETT
 #undef ONACTIVATE
@@ -94,6 +96,7 @@
 #undef ONDEACTIVATE
 #undef ONDEACTIVATEL 
 #undef ONCLOSE
+#undef ONLCC
 #undef ONTIME
 #undef ONCLOCKTIME
 #undef ONCLOCKMINS
@@ -222,6 +225,8 @@
 #define JOIN 
 #define KILLALL
 #define LATCH(sensor_id)
+#define LCC(eventid) 
+#define LCCX(senderid,eventid) 
 #define LCD(row,msg)
 #define SCREEN(display,row,msg)
 #define LCN(msg) 
@@ -236,6 +241,7 @@
 #define ONDEACTIVATE(addr,subaddr)
 #define ONDEACTIVATEL(linear) 
 #define ONCLOSE(turnout_id)
+#define ONLCC(sender,event)
 #define ONGREEN(signal_id) 
 #define ONRED(signal_id)
 #define ONROTATE(turntable_id)

EXRAILMacros.h

@@ -85,6 +85,30 @@ void exrailHalSetup() {
    #include "myAutomation.h"
 }
 
+// Pass 1c detect compile time featurtes
+#include "EXRAIL2MacroReset.h"
+#undef SIGNAL
+#define SIGNAL(redpin,amberpin,greenpin) | FEATURE_SIGNAL 
+#undef SIGNALH
+#define SIGNALH(redpin,amberpin,greenpin) | FEATURE_SIGNAL 
+#undef SERVO_SIGNAL
+#define SERVO_SIGNAL(vpin,redval,amberval,greenval) | FEATURE_SIGNAL 
+#undef DCC_SIGNAL
+#define DCC_SIGNAL(id,addr,subaddr) | FEATURE_SIGNAL
+#undef VIRTUAL_SIGNAL
+#define VIRTUAL_SIGNAL(id) | FEATURE_SIGNAL
+
+#undef LCC
+#define LCC(eventid)  | FEATURE_LCC
+#undef LCCX
+#define LCCX(senderid,eventid) | FEATURE_LCC 
+#undef ONLCC
+#define ONLCC(senderid,eventid) | FEATURE_LCC
+
+const byte RMFT2::compileFeatures = 0
+   #include "myAutomation.h"
+;
+
 // Pass 2 create throttle route list 
 #include "EXRAIL2MacroReset.h"
 #undef ROUTE
@@ -278,6 +302,16 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
     #include "myAutomation.h"
     0,0,0,0 };
 
+// Pass 9 ONLCC counter and lookup array
+#include "EXRAIL2MacroReset.h"
+#undef ONLCC
+#define ONLCC(sender,event) +1 
+
+const int RMFT2::countLCCLookup=0
+#include "myAutomation.h"
+;
+int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
+
 // Last Pass : create main routes table
 // Only undef the macros, not dummy them.  
 #define  RMFT2_UNDEF_ONLY
@@ -354,6 +388,11 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define JOIN OPCODE_JOIN,0,0,
 #define KILLALL OPCODE_KILLALL,0,0,
 #define LATCH(sensor_id) OPCODE_LATCH,V(sensor_id),
+#define LCC(eventid) OPCODE_LCC,V(eventid),
+#define LCCX(sender,event) OPCODE_LCCX,V(event),\
+        OPCODE_PAD,V((((uint64_t)sender)>>32)&0xFFFF),\
+        OPCODE_PAD,V((((uint64_t)sender)>>16)&0xFFFF),\
+        OPCODE_PAD,V((((uint64_t)sender)>>0)&0xFFFF),  
 #define LCD(id,msg) PRINT(msg)
 #define SCREEN(display,id,msg) PRINT(msg)
 #define LCN(msg) PRINT(msg)
@@ -362,6 +401,10 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define ONACTIVATEL(linear) OPCODE_ONACTIVATE,V(linear+3),
 #define ONAMBER(signal_id) OPCODE_ONAMBER,V(signal_id),
 #define ONCLOSE(turnout_id) OPCODE_ONCLOSE,V(turnout_id),
+#define ONLCC(sender,event) OPCODE_ONLCC,V(event),\
+        OPCODE_PAD,V((((uint64_t)sender)>>32)&0xFFFF),\
+        OPCODE_PAD,V((((uint64_t)sender)>>16)&0xFFFF),\
+        OPCODE_PAD,V((((uint64_t)sender)>>0)&0xFFFF),        
 #define ONTIME(value) OPCODE_ONTIME,V(value),  
 #define ONCLOCKTIME(hours,mins) OPCODE_ONTIME,V((STRIP_ZERO(hours)*60)+STRIP_ZERO(mins)),
 #define ONCLOCKMINS(mins) ONCLOCKTIME(25,mins)

StringFormatter.cpp

@@ -117,6 +117,7 @@ void StringFormatter::send2(Print * stream,const FSH* format, va_list args) {
       case 'o': stream->print(va_arg(args, int), OCT); break;
       case 'x': stream->print((unsigned int)va_arg(args, unsigned int), HEX); break;
       case 'X': stream->print((unsigned long)va_arg(args, unsigned long), HEX); break;
+      case 'h': printHex(stream,(unsigned int)va_arg(args, unsigned int)); break;
       case 'M':
       { // this prints a unsigned long microseconds time in readable format
 	unsigned long time = va_arg(args, long);
@@ -218,4 +219,15 @@ void StringFormatter::printPadded(Print* stream, long value, byte width, bool fo
     if (!formatLeft) stream->print(value, DEC);    
   }
 
+// printHex prints the full 2 byte hex with leading zeros, unlike print(value,HEX)
+const char FLASH hexchars[]="0123456789ABCDEF";
+void StringFormatter::printHex(Print * stream,uint16_t value) {
+    char result[5];
+    for (int i=3;i>=0;i--) {
+      result[i]=GETFLASH(hexchars+(value & 0x0F));
+      value>>=4;
+    }
+    result[4]='\0';
+     stream->print(result);
+}
  

StringFormatter.h

@@ -49,6 +49,7 @@ class StringFormatter
     static void lcd2(uint8_t display, byte row, const FSH* input...);
     static void printEscapes(char * input);
     static void printEscape( char c);
+    static void printHex(Print * stream,uint16_t value);
 
     private: 
     static void send2(Print * serial, const FSH* input,va_list args);

version.h

@@ -3,7 +3,8 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.1.14"
+#define VERSION "5.1.15"
+// 5.1.15 - LCC/Adapter support and Exrail feature-compile-out.
 // 5.1.14 - Fixed IFTTPOSITION
 // 5.1.13 - Changed turntable broadcast from i to I due to server string conflict
 // 5.1.12 - Added Power commands <0 A> & <1 A> etc. and update to <=>