dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-27 01:56:14 +01:00
Code Releases Activity

Update CommandStation-EX.ino

Browse Source
This commit is contained in:
Fred 2020-10-28 14:14:11 -04:00 committed by GitHub
parent a28792312a
commit 7537f4c3d6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 15 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
CommandStation-EX.ino
View File

@ -12,19 +12,6 @@
#include "config.h"
#include "DCCEX.h"
////////////////////////////////////////////////////////////////
//
// Enables an I2C 2x24 or 4x24 LCD Screen
#ifdef ENABLE_LCD
bool lcdEnabled = false;
#if defined(LIB_TYPE_PCF8574)
LiquidCrystal_PCF8574 lcdDisplay(LCD_ADDRESS);
#elif defined(LIB_TYPE_I2C)
LiquidCrystal_I2C lcdDisplay = LiquidCrystal_I2C(LCD_ADDRESS, LCD_COLUMNS, LCD_LINES);
#endif
#endif
// Create a serial command parser for the USB connection,
// This supports JMRI or manual diagnostics and commands
// to be issued from the USB serial console.
@ -32,70 +19,23 @@ DCCEXParser serialParser;
void setup()
{
////////////////////////////////////////////
//
// More display stuff. Need to put this in a .h file and make
// it a class
#ifdef ENABLE_LCD
Wire.begin();
// Check that we can find the LCD by its address before attempting to use it.
Wire.beginTransmission(LCD_ADDRESS);
if (Wire.endTransmission() == 0)
{
lcdEnabled = true;
lcdDisplay.begin(LCD_COLUMNS, LCD_LINES);
lcdDisplay.setBacklight(128);
lcdDisplay.clear();
lcdDisplay.setCursor(0, 0);
lcdDisplay.print("DCC++ EX v");
lcdDisplay.print(VERSION);
lcdDisplay.setCursor(0, 1);
//#if COMM_INTERFACE >= 1
// lcdDisplay.print("IP: PENDING");
//#else
lcdDisplay.print("SERIAL: READY 1");
//#endif
#if LCD_LINES > 2
lcdDisplay.setCursor(0, 3);
lcdDisplay.print("TRACK POWER: OFF");
#endif
}
#endif
// The main sketch has responsibilities during setup()
// Responsibility 1: Start the usb connection for diagnostics
// This is normally Serial but uses SerialUSB on a SAMD processor
Serial.begin(115200);
DIAG(F("DCC++ EX v%S"),F(VERSION));
CONDITIONAL_LCD_START {
// This block is ignored if LCD not in use
LCD(0,F("DCC++ EX v%S"),F(VERSION));
LCD(1,F("Starting"));
}
// Start the WiFi interface on a MEGA, Uno cannot currently handle WiFi
// NOTE: References to Serial1 are for the serial port used to connect
// your wifi chip/shield.
#ifdef WIFI_ON
bool wifiUp = false;
const __FlashStringHelper *wifiESSID = F(WIFI_SSID);
const __FlashStringHelper *wifiPassword = F(WIFI_PASSWORD);
const __FlashStringHelper *dccex = F(WIFI_HOSTNAME);
const uint16_t port = IP_PORT;
Serial1.begin(WIFI_SERIAL_LINK_SPEED);
wifiUp = WifiInterface::setup(Serial1, wifiESSID, wifiPassword, dccex, port);
#if NUM_SERIAL > 1
if (!wifiUp)
{
Serial2.begin(WIFI_SERIAL_LINK_SPEED);
wifiUp = WifiInterface::setup(Serial2, wifiESSID, wifiPassword, dccex, port);
}
#if NUM_SERIAL > 2
if (!wifiUp)
{
Serial3.begin(WIFI_SERIAL_LINK_SPEED);
wifiUp = WifiInterface::setup(Serial3, wifiESSID, wifiPassword, dccex, port);
}
#endif // >2
#endif // >1
#if WIFI_ON
WifiInterface::setup(WIFI_SERIAL_LINK_SPEED, F(WIFI_SSID), F(WIFI_PASSWORD), F(WIFI_HOSTNAME), IP_PORT);
#endif // WIFI_ON
// Responsibility 3: Start the DCC engine.
@ -109,6 +49,7 @@ void setup()
// waveform generation. e.g. DCC::begin(STANDARD_MOTOR_SHIELD,2); to use timer 2
DCC::begin(MOTOR_SHIELD_TYPE);
LCD(1,F("Ready"));
}
void loop()
@ -123,10 +64,12 @@ void loop()
serialParser.loop(Serial);
// Responsibility 3: Optionally handle any incoming WiFi traffic
#ifdef WIFI_ON
#if WIFI_ON
WifiInterface::loop();
#endif
LCDDisplay::loop(); // ignored if LCD not in use
// Optionally report any decrease in memory (will automatically trigger on first call)
#if ENABLE_FREE_MEM_WARNING
static int ramLowWatermark = 32767; // replaced on first loop
@ -135,7 +78,7 @@ void loop()
if (freeNow < ramLowWatermark)
{
ramLowWatermark = freeNow;
DIAG(F("\nFree RAM=%d\n"), ramLowWatermark);
LCD(2,F("Free RAM=%5db"), ramLowWatermark);
}
#endif
}