dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-23 08:06:13 +01:00
Code Releases Activity

make inverted power pin possible, lower DC frequency on Mega and for Uno if inverted def is used

Browse Source
This commit is contained in:
Harald Barth 2022-08-30 22:12:10 +02:00
parent cec6d6dbe7
commit 7d1d6bf1e1
2 changed files with 20 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
MotorDriver.cpp
View File

@ -56,10 +56,17 @@ volatile portreg_t shadowPORTA;
volatile portreg_t shadowPORTB; volatile portreg_t shadowPORTB;
volatile portreg_t shadowPORTC; volatile portreg_t shadowPORTC;
MotorDriver::MotorDriver(VPIN power_pin, byte signal_pin, byte signal_pin2, int8_t brake_pin, MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, int8_t brake_pin,
byte current_pin, float sense_factor, unsigned int trip_milliamps, byte fault_pin) { byte current_pin, float sense_factor, unsigned int trip_milliamps, byte fault_pin) {
powerPin=power_pin; powerPin=power_pin;
IODevice::write(powerPin,LOW);// set to OUTPUT and off invertPower=power_pin < 0;
if (invertPower) {
powerPin = 0-power_pin;
IODevice::write(powerPin,HIGH);// set to OUTPUT and off
} else {
powerPin = power_pin;
IODevice::write(powerPin,LOW);// set to OUTPUT and off
}
signalPin=signal_pin; signalPin=signal_pin;
getFastPin(F("SIG"),signalPin,fastSignalPin); getFastPin(F("SIG"),signalPin,fastSignalPin);
@ -165,14 +172,14 @@ void MotorDriver::setPower(POWERMODE mode) {
bool on=mode==POWERMODE::ON; bool on=mode==POWERMODE::ON;
if (on) { if (on) {
noInterrupts(); noInterrupts();
IODevice::write(powerPin,HIGH); IODevice::write(powerPin,invertPower ? LOW : HIGH);
interrupts(); interrupts();
if (isProgTrack) if (isProgTrack)
DCCWaveform::progTrack.clearResets(); DCCWaveform::progTrack.clearResets();
} }
else { else {
noInterrupts(); noInterrupts();
IODevice::write(powerPin,LOW); IODevice::write(powerPin,invertPower ? HIGH : LOW);
interrupts(); interrupts();
} }
powerMode=mode; powerMode=mode;
@ -232,6 +239,13 @@ void MotorDriver::setDCSignal(byte speedcode) {
return; return;
#if defined(ARDUINO_ARCH_ESP32) #if defined(ARDUINO_ARCH_ESP32)
DCCEXanalogWriteFrequency(brakePin, 100); // set DC PWM frequency to 100Hz XXX May move to setup DCCEXanalogWriteFrequency(brakePin, 100); // set DC PWM frequency to 100Hz XXX May move to setup
#endif
#if defined(ARDUINO_AVR_UNO)
TCCR2B = TCCR2B & B11111000 | B00000110; // set divisor on timer 2 to result in (approx) 122.55Hz
#endif
#if defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560)
TCCR2B = TCCR2B & B11111000 | B00000110; // set divisor on timer 2 to result in (approx) 122.55Hz
TCCR4B = TCCR4B & B11111000 | B00000100; // same for timer 4 but maxcount and thus divisor differs
#endif #endif
// spedcoode is a dcc speed & direction // spedcoode is a dcc speed & direction
byte tSpeed=speedcode & 0x7F; // DCC Speed with 0,1 stop and speed steps 2 to 127 byte tSpeed=speedcode & 0x7F; // DCC Speed with 0,1 stop and speed steps 2 to 127

3
MotorDriver.h
View File

@ -111,7 +111,7 @@ enum class POWERMODE : byte { OFF, ON, OVERLOAD };
class MotorDriver { class MotorDriver {
public: public:
MotorDriver(VPIN power_pin, byte signal_pin, byte signal_pin2, int8_t brake_pin, MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, int8_t brake_pin,
byte current_pin, float senseFactor, unsigned int tripMilliamps, byte faultPin); byte current_pin, float senseFactor, unsigned int tripMilliamps, byte faultPin);
void setPower( POWERMODE mode); void setPower( POWERMODE mode);
POWERMODE getPower() { return powerMode;} POWERMODE getPower() { return powerMode;}
@ -194,6 +194,7 @@ class MotorDriver {
FASTPIN fastSignalPin, fastSignalPin2, fastBrakePin,fastFaultPin; FASTPIN fastSignalPin, fastSignalPin2, fastBrakePin,fastFaultPin;
bool dualSignal; // true to use signalPin2 bool dualSignal; // true to use signalPin2
bool invertBrake; // brake pin passed as negative means pin is inverted bool invertBrake; // brake pin passed as negative means pin is inverted
bool invertPower; // power pin passed as negative means pin is inverted
// Raw to milliamp conversion factors avoiding float data types. // Raw to milliamp conversion factors avoiding float data types.
// Milliamps=rawADCreading * sensefactorInternal / senseScale // Milliamps=rawADCreading * sensefactorInternal / senseScale