1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 13:21:23 +01:00

ESP32 I/O info

This commit is contained in:
Harald Barth 2021-10-22 08:35:29 +02:00
parent faeb3194db
commit 8a0ddb0d74

View File

@ -47,9 +47,15 @@ The configuration file for DCC-EX Command Station
new MotorDriver(D3, D5, UNUSED_PIN, UNUSED_PIN, UNUSED_PIN, 2.99, 2000, UNUSED_PIN),\
new MotorDriver(D2, D6, UNUSED_PIN, UNUSED_PIN, A0 , 2.99, 2000, UNUSED_PIN)
// ADC1 CH4 = GPIO32
// ADC1 CH5 = GPIO33
// Adjust pin usage according to info in
// https://randomnerdtutorials.com/esp32-adc-analog-read-arduino-ide/
// https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
// Adjust conversion factor according to your voltage divider
#define ESP32_MOTOR_SHIELD F("ESP32"), \
new MotorDriver(16, 17, UNUSED_PIN, UNUSED_PIN, 36, 2.99, 2000, UNUSED_PIN),\
new MotorDriver(18, 19, UNUSED_PIN, UNUSED_PIN, 37, 2.99, 2000, UNUSED_PIN)
new MotorDriver(16, 17, UNUSED_PIN, UNUSED_PIN, 32, 2.99, 2000, UNUSED_PIN),\
new MotorDriver(18, 19, UNUSED_PIN, UNUSED_PIN, 33, 2.99, 2000, UNUSED_PIN)
#define MOTOR_SHIELD_TYPE ESP32_MOTOR_SHIELD