Reduced EXRAIL diag noise

EXRAIL2.cpp

@@ -176,7 +176,7 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
 
 /* static */ void RMFT2::begin() {
 
-  DIAG(F("EXRAIL RoutCode at =%P"),RouteCode);
+  //DIAG(F("EXRAIL RoutCode at =%P"),RouteCode);
     
   bool saved_diag=diag;
   diag=true;
@@ -411,7 +411,7 @@ void RMFT2::createNewTask(int route, uint16_t cab) {
 
 void RMFT2::driveLoco(byte speed) {
   if (loco<=0) return;  // Prevent broadcast!
-  if (diag) DIAG(F("EXRAIL drive %d %d %d"),loco,speed,forward^invert);
+  //if (diag) DIAG(F("EXRAIL drive %d %d %d"),loco,speed,forward^invert);
  /* TODO.....
  power on appropriate track if DC or main if dcc
   if (TrackManager::getMainPowerMode()==POWERMODE::OFF) {
@@ -1066,7 +1066,7 @@ void RMFT2::loop2() {
   case OPCODE_ROUTE:
   case OPCODE_AUTOMATION:
   case OPCODE_SEQUENCE:
-    if (diag) DIAG(F("EXRAIL begin(%d)"),operand);
+    //if (diag) DIAG(F("EXRAIL begin(%d)"),operand);
     break;
     
   case OPCODE_AUTOSTART: // Handled only during begin process
@@ -1146,7 +1146,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
 
 /* static */ void RMFT2::doSignal(int16_t id,char rag) {
   if (!(compileFeatures & FEATURE_SIGNAL)) return; // dont compile code below
-  if (diag) DIAG(F(" doSignal %d %x"),id,rag);
+  //if (diag) DIAG(F(" doSignal %d %x"),id,rag);
   
   // Schedule any event handler for this signal change.
   // This will work even without a signal definition. 
@@ -1166,7 +1166,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
   VPIN redpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2);
   VPIN amberpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4);
   VPIN greenpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6);
-  if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
+  //if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
 
   VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
 
@@ -1174,7 +1174,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
     // A servo signal, the pin numbers are actually servo positions
     // Note, setting a signal to a zero position has no effect.
     int16_t servopos= rag==SIGNAL_RED? redpin: (rag==SIGNAL_GREEN? greenpin : amberpin);
-    if (diag) DIAG(F("sigA %d %d"),id,servopos);
+    //if (diag) DIAG(F("sigA %d %d"),id,servopos);
     if  (servopos!=0) IODevice::writeAnalogue(id,servopos,PCA9685::Bounce);
     return;  
   }
@@ -1292,7 +1292,7 @@ void RMFT2::rotateEvent(int16_t turntableId, bool change) {
 void RMFT2::clockEvent(int16_t clocktime, bool change) {
   // Hunt for an ONTIME for this time
   if (Diag::CMD)
-   DIAG(F("Looking for clock event at : %d"), clocktime);
+   DIAG(F("clockEvent at : %d"), clocktime);
   if (change) {
     onClockLookup->handleEvent(F("CLOCK"),clocktime);
     onClockLookup->handleEvent(F("CLOCK"),25*60+clocktime%60);
@@ -1302,7 +1302,7 @@ void RMFT2::clockEvent(int16_t clocktime, bool change) {
 void RMFT2::powerEvent(int16_t track, bool overload) {
   // Hunt for an ONOVERLOAD for this item
   if (Diag::CMD)
-   DIAG(F("Looking for Power event on track : %c"), track);
+   DIAG(F("powerEvent : %c"), track);
   if (overload) {
     onOverloadLookup->handleEvent(F("POWER"),track);
   }

Release_Notes/EXRAIL additions.md

@@ -1,38 +0,0 @@
-
-BLINK(vpin, onMs,offMs)
-
-which will start a vpin blinking until such time as it is SET, RESET or set by a signal operation such as RED, AMBER, GREEN. 
-
-BLINK returns immediately, the blinking is autonomous. 
-
-This means a signal that always blinks amber could be done like this:
-```
-SIGNAL(30,31,32)
-ONAMBER(30) BLINK(31,500,500) DONE
-```
-The RED or GREEN calls will turn off the amber blink automatically.
-
-Alternatively a signal that has normal AMBER and flashing AMBER could be like this:
-
-#define FLASHAMBER(signal) \
-                AMBER(signal) \
-                BLINK(signal+1,500,500)
-  
-  (Caution: this issumes that the amber pin is redpin+1)
-
-  ==
-
-  FTOGGLE(function)
-   Toggles the current loco function (see FON and FOFF)
-
-  XFTOGGLE(loco,function)
-     Toggles the function on given loco. (See XFON, XFOFF)
-
-  TOGGLE_TURNOUT(id) 
-      Toggles the turnout (see CLOSE, THROW)
-
-  STEALTH_GLOBAL(code) 
-      ADVANCED C++ users only.
-      Inserts code such as static variables and functions that 
-      may be utilised by multiple STEALTH operations.
-       

version.h

@@ -3,7 +3,13 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.46"
+#define VERSION "5.2.47"
+// 5.2.47 - EXRAIL additions:
+//          STEALTH_GLOBAL
+//          BLINK
+//          TOGGLE_TURNOUT
+//          FTOGGLE, XFTOGGLE
+//          Reduced code-developmenmt DIAG noise
 // 5.2.46 - Support for extended consist CV20 in <R> and <W id>
 //        - New cmd <W CONSIST id [REVERSE]> to handle long/short consist ids
 // 5.2.45 - ESP32 Trackmanager reset cab number to 0 when track is not DC