1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 12:51:24 +01:00

devel release version 4.2.54

This commit is contained in:
Harald Barth 2023-06-03 22:01:14 +02:00
parent e81d1cc93a
commit 8a69403dda
3 changed files with 17 additions and 6 deletions

View File

@ -1 +1 @@
#define GITHUB_SHA "devel-202305290743Z"
#define GITHUB_SHA "devel-202306031954Z"

View File

@ -1,7 +1,7 @@
/*
* © 2022 Paul M. Antoine
* © 2021 Neil McKechnie
* © 2020-2021 Harald Barth
* © 2020-2023 Harald Barth
* © 2020-2021 Fred Decker
* © 2020-2021 Chris Harlow
*
@ -27,6 +27,16 @@ The configuration file for DCC-EX Command Station
**********************************************************************/
/////////////////////////////////////////////////////////////////////////////////////
// If you want to add your own motor driver definition(s), add them here
// For example MY_SHIELD with display name "MINE":
// (remove comment start and end marker if you want to edit and use that)
/*
#define MY_SHIELD F("MINE"), \
new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 5.08, 3000, A4), \
new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 5.08, 1500, A5)
*/
/////////////////////////////////////////////////////////////////////////////////////
// NOTE: Before connecting these boards and selecting one in this software
// check the quick install guides!!! Some of these boards require a voltage
@ -34,15 +44,15 @@ The configuration file for DCC-EX Command Station
// the correct resistor could damage the sense pin on your Arduino or destroy
// the device.
//
// DEFINE MOTOR_SHIELD_TYPE BELOW ACCORDING TO THE FOLLOWING TABLE:
// DEFINE MOTOR_SHIELD_TYPE BELOW. THESE ARE EXAMPLES. FULL LIST IN MotorDrivers.h
//
// STANDARD_MOTOR_SHIELD : Arduino Motor shield Rev3 based on the L298 with 18V 2A per channel
// POLOLU_MOTOR_SHIELD : Pololu MC33926 Motor Driver (not recommended for prog track)
// POLOLU_TB9051FTG : Pololu Dual TB9051FTG Motor Driver
// FUNDUMOTO_SHIELD : Fundumoto Shield, no current sensing (not recommended, no short protection)
// FIREBOX_MK1 : The Firebox MK1
// FIREBOX_MK1S : The Firebox MK1S
// IBT_2_WITH_ARDUINO : Arduino Motor Shield for PROG and IBT-2 for MAIN
// EX8874_SHIELD : DCC-EX TI DRV8874 based motor shield
// |
// +-----------------------v
//

View File

@ -4,8 +4,9 @@
#include "StringFormatter.h"
#define VERSION "4.2.54pre5"
// 4.2.54 - Fix: Better warnings for pin number errors
#define VERSION "4.2.54"
// 4.2.54 - EX8874 shield in config.example.h
// - Fix: Better warnings for pin number errors
// - Fix: Default roster list possible in Withrottle and <jR>
// - Fix: Pin handling supports pins up to 254
// 4.2.53 - Fix: Fault pin handling made more straight forward