diff --git a/release_notes.md b/release_notes.md
new file mode 100644
index 0000000..0893e1a
--- /dev/null
+++ b/release_notes.md
@@ -0,0 +1,93 @@
+The DCC-EX Team is pleased to release CommandStation-EX-v3.0.0 as a Production Release.  This release is a major re-write of earlier versions.  We've re-architected the code-base so that it can better handle new features going forward.  
+
+**Known Bugs:**
+ - **Consisting through JMRI** - currently does not work in this release.  You may use the <M> command to do this manually.
+ - **Wi-Fi** - works, but can be challenging to use if you want to switch between AP mode and STA station mode.
+ - **Pololu Motor Shield** - is supported with this release, but the user may have to play around with some timings to enable programming mode due to limitation in its current sensing circuitry 
+ 
+**Summary of the key new features added to CommandStation-EX V3.0.3**
+ - **<W addr> command to write loco address and clear consist** 
+ - **<R> command will allow for consist address**
+ - **Startup commands implemented**
+ 
+**Summary of the key new features added to CommandStation-EX V3.0.2:**
+- **Create new output for current in mA for ``<c>`` command** - New current response outputs current in mA, overlimit current, and maximum board capable current
+- **Simultaneously update JMRI to handle new current meter**
+
+**Summary of the key new features added to CommandStation-EX V3.0.1:**
+ - **Add back fix for jitter**
+ - **Add Turnouts, Outputs and Sensors to ```<s>``` command output**
+
+ **Summary of the key new features added to CommandStation-EX V3.0.0:**
+
+ - **New USB Browser Based Throttle** - WebThrottle-EX is a full front-end to controller to control the CS to run trains.
+ - **WiFi Support** - AP and station modes supported. Auto-detection of an ESP8266 WiFi module with AT firmware on a Mega's serial port. Connection to JMRI and WiThrottle clients.
+ - **Withrottle Integrations** - Act as a host for up to four WiThrottle clients concurrently. 
+ - **Add LCD/OLED support** - OLED supported on Mega only
+ - **Improved CV programming routines** - checks for length of CV pulse, and breaks out of the wait state once it has received an ACK, now reading one CV per second.
+ - **Improved current sensing** - rewrote current sensing routines for safer operation. Current thresholds based on milliamps, not magic numbers
+ - **Individual track power control** - Ability to toggle power on either or both tracks, and to "JOIN" the tracks and make them output the same waveform for multiple power districts.
+ - **Single or Dual-Pin PWM output** - Allows control of H-bridges with PH/EN or dual PWM inputs
+ - **New, simpler function command** - ```<F>``` command allows setting functions based on their number, not based on a code as in ```<f>```
+ - **Function reminders** - Function reminders are sent in addition to speed reminders
+ - **Functions to F28** - All NMRA functions are now supported
+ - **Filters and user functions** - Ability to filter commands in the parser and execute custom code based on them. (ex: Redirect Turnout commands via NRF24)
+ - **Diagnostic ```<D>``` commands** - See documentation for a full list of new diagnostic commands
+ - **Rewrote DCC++ Parser** - more efficient operation, accepts multi-char input and uses less RAM
+ - **Rewritten waveform generator** - capable of using any pin for DCC waveform out, eliminating the need for jumpers
+ - **Rewritten packet generator** - Simplify and make smaller, remove idea of "registers" from original code
+ - **Add free RAM messages** - Free RAM messages are now printed whenever there is a decerase in available RAM
+ - **Fix EEPROM bugs**
+ - **Number of locos discovery command** - ```<#>``` command 
+ - **Support for more locomotives** - 20 locomotives on an UNO and 50 an a Mega.
+ - **Automatic slot managment** - slot variable in throttle/function commands are ignored and slot management is taken care of automatically. ```<!>``` command added to release locos from memory.
+
+
+**Key Contributors**
+
+**Project Lead**
+- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
+
+**CommandStation-EX Developers**
+- Chris Harlow - Bournemouth, UK (UKBloke)
+- Harald Barth - Stockholm, Sweden (Haba)
+- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
+- Dave Cutting - Logan, Utah, USA (Dave Cutting/ David Cutting)
+- M Steve Todd - - Engine Driver and JMRI Interface
+- Scott Catalanno - Pennsylvania
+- Gregor Baues - Île-de-France, France (grbba)
+
+**exInstaller Software**
+- Anthony W - Dayton, Ohio, USA (Dex, Dex++)
+
+**Website and Documentation**
+- Mani Kumar - Bangalor, India (Mani / Mani Kumar)
+- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
+- Dave Cutting - Logan, Utah, USA (Dave Cutting/ David Cutting)
+- Roger Beschizza - Dorset, UK (Roger Beschizza)
+- Keith Ledbetter - Chicago, Illinois, USA (Keith Ledbetter)
+- Kevin Smith - (KCSmith)
+
+**WebThrotle-EX**
+- Fred Decker - Holly Springs, NC (FlightRisk/FrightRisk)
+- Mani Kumar - Bangalor, India (Mani /Mani Kumar)
+- Matt H - 
+
+
+
+**Beta Testing / Release Management / Support**
+- Larry Dribin	- Release Management
+- Keith Ledbetter	
+- BradVan der Elst	
+- Andrew Pye	
+- Mike Bowers	
+- Randy McKenzie
+- Roberto Bravin
+- Sim Brigden
+- Alan Lautenslager
+- Martin Bafver	
+- Mário André Silva	
+- Anthony Kochevar	
+- Gajanatha Kobbekaduwe	
+- Sumner Patterson 
+- Paul - Virginia, USA