MQ and Ethenet support are independent

DccMQTT.cpp

@@ -117,7 +117,7 @@ void mqttCallback(char *topic, byte *payload, unsigned int length)
   errno = 0;
   payload[length] = '\0'; // make sure we have the string terminator in place
 
-  // DIAG(F("MQTT Callback:[%s] [%s] [%d]"), topic, (char *)payload, length);
+  DIAG(F("MQTT Callback:[%s] [%s] [%d]"), topic, (char *)payload, length);
 
   switch (payload[0])
   {
@@ -175,7 +175,8 @@ void mqttCallback(char *topic, byte *payload, unsigned int length)
 
     csmsg_t tm; // topic message
 
-    if ( length + 1 > MAXPAYLOAD) {
+    if (length + 1 > MAXPAYLOAD)
+    {
       DIAG(F("MQTT Command too long (> %d characters)"), MAXPAYLOAD);
     }
     strlcpy(tm.cmd, (char *)payload, length + 1); // message payload
@@ -201,7 +202,6 @@ void mqttCallback(char *topic, byte *payload, unsigned int length)
     case 'i':
     {
 
-      
       char buffer[30];
       char *tmp = (char *)payload + 3;
       strlcpy(buffer, tmp, length);
@@ -301,11 +301,11 @@ void DccMQTT::connect()
 {
 
   int reconnectCount = 0;
+  connectID[0] = '\0';
 
   // Build the connect ID : Prefix + clientID
   if (broker->prefix != nullptr)
   {
-    connectID[0] = '\0';
     strcpy_P(connectID, (const char *)broker->prefix);
   }
   strcat(connectID, clientID);
@@ -324,6 +324,7 @@ void DccMQTT::connect()
       if (mqttClient.connect(connectID))
       {
         DIAG(F("MQTT Broker connected ..."));
+        mqState = CONNECTED;
       }
       else
       {
@@ -350,6 +351,7 @@ void DccMQTT::connect()
     if (reconnectCount == MAXRECONNECT)
     {
       DIAG(F("MQTT Connection aborted after %d tries"), MAXRECONNECT);
+      mqState = CONNECTION_FAILED;
     }
   }
 }
@@ -373,6 +375,37 @@ void DccMQTT::publish(char *topic, char *payload)
  */
 void DccMQTT::setup()
 {
+  // setup Ethnet connection first
+  byte mac[6];
+  DCCTimer::getSimulatedMacAddress(mac);
+
+#ifdef IP_ADDRESS
+  Ethernet.begin(mac, IP_ADDRESS);
+#else
+  if (Ethernet.begin(mac) == 0)
+  {
+    DIAG(F("Ethernet.begin FAILED"));
+    return;
+  }
+#endif
+  DIAG(F("Ethernet.begin OK."));
+  if (Ethernet.hardwareStatus() == EthernetNoHardware)
+  {
+    DIAG(F("Ethernet shield not found"));
+    return;
+  }
+  if (Ethernet.linkStatus() == LinkOFF)
+  {
+    DIAG(F("Ethernet cable not connected"));
+    return;
+  }
+
+  IPAddress ip = Ethernet.localIP(); // reassign the obtained ip address
+
+  DIAG(F("IP: %d.%d.%d.%d"), ip[0], ip[1], ip[2], ip[3]);
+  DIAG(F("Port:%d"), IP_PORT);
+
+  // setup the MQBroker
   setup(CSMQTTBROKER);
 }
 
@@ -387,26 +420,21 @@ void DccMQTT::setup(const FSH *id, MQTTBroker *b)
 
   //Create the MQTT environment and establish inital connection to the Broker
   broker = b;
-  // get a eth client session
 
   DIAG(F("MQTT Connect to %S at %S/%d.%d.%d.%d:%d"), id, broker->domain, broker->ip[0], broker->ip[1], broker->ip[2], broker->ip[3], broker->port);
-  ethClient = EthernetInterface::get()->getServer()->accept(); // get a cleint from the EthernetInterface
 
-  // initalize MQ Broker
-  mqttClient = PubSubClient(ethClient);
-  mqttClient.setServer(broker->ip, broker->port);
-
-  DIAG(F("MQTT Client : Server ok ...%x/%x"), ethClient, mqttClient);
-
-  mqttClient.setCallback(mqttCallback); // Initalize callback function for incomming messages
-
-  DIAG(F("MQTT Client : Callback set ..."));
 
   byte mqbid[CLIENTIDSIZE] = {0};
   DCCTimer::getSimulatedMacAddress(mqbid);
 
+  // initalize MQ Broker
+
+  mqttClient = PubSubClient(broker->ip, broker->port, mqttCallback, ethClient);
+  DIAG(F("MQTT Client created ok..."));
+
   array_to_string(mqbid, CLIENTIDSIZE, clientID);
   DIAG(F("MQTT Client ID : %s"), clientID);
+
   connect();                               // inital connection as well as reconnects
   auto sub = DccMQTT::subscribe(clientID); // set up all subscriptions
 
@@ -416,7 +444,11 @@ void DccMQTT::setup(const FSH *id, MQTTBroker *b)
 
 void DccMQTT::loop()
 {
-
+  // Connection impossible so just don't do anything
+  if (mqState == CONNECTION_FAILED)
+  {
+    return;
+  }
   if (!mqttClient.connected())
   {
     connect();
@@ -426,9 +458,9 @@ void DccMQTT::loop()
     DIAG(F("mqttClient returned with error; state: %d"), mqttClient.state());
   };
 
-
   // read incomming queue for processing; one per loop
   bool state;
+  DIAG(F("in.count: %d"), in.count());
   if (in.count() > 0)
   {
     auto idx = in.peek();
@@ -436,16 +468,16 @@ void DccMQTT::loop()
     DIAG(F("MQTT Processing pool: %d with command: %s from client %d"), idx, c->cmd, c->mqsocket);
     DIAG(F("Ring free space1: %d"), outboundRing->freeSpace());
     outboundRing->mark((uint8_t)c->mqsocket);
-    // CommandDistributor::parse(c->mqsocket, (byte *)c->cmd, outboundRing);
+    CommandDistributor::parse(c->mqsocket, (byte *)c->cmd, outboundRing);
-    StringFormatter::send(outboundRing, F("Test result message"));
+    // StringFormatter::send(outboundRing, F("Test result message"));
     outboundRing->commit();
     DIAG(F("Ring free space2: %d"), outboundRing->freeSpace());
     pool.returnItem(idx);
   }
 
-  
   // handle at most 1 outbound transmission
   int socketOut = outboundRing->read();
+  DIAG(F("socketOut: %d"), socketOut);
   if (socketOut > 0) // mqsocket / clientid can't be 0 ....
   {
     int count = outboundRing->count();
@@ -465,5 +497,4 @@ void DccMQTT::loop()
     DIAG(F("MQTT publish with payload:\n%s"), payload);
     // mqtt->publish(buffer, payload);
   }
-
 }