Low ram sensor groups

EXRAILMacros.h

@@ -113,11 +113,29 @@ bool exrailHalSetup1() {
 // the first pass from the opcode table. 
 #include "EXRAIL2MacroReset.h"
 #undef JMRI_SENSOR
-#define JMRI_SENSOR(vpin,count...) Sensor::createMultiple(vpin,##count);
+#define JMRI_SENSOR(vpin,count...) \
+  { \
+   const int npins=#count[0]? count+0:1; \
+   static byte state_map[(npins+7)/8]; \
+   SensorGroup::doSensorGroup(vpin,npins,state_map,action,&USB_SERIAL); \
+  }
+
+void SensorGroup::doExrailSensorGroup(GroupProcess action, Print * stream) {
+   (void)   action; // suppress unused warning
+   (void)   stream; // suppress unused warning 
+   #include "myAutomation.h"
+}
+
+// Pass 1s Implements servos by creating exrailHalSetup2
+// TODO Turnout and turntable creation should be moved to here instead of 
+// the first pass from the opcode table. 
+#include "EXRAIL2MacroReset.h"
 #undef  CONFIGURE_SERVO
 #define CONFIGURE_SERVO(vpin,pos1,pos2,profile) IODevice::configureServo(vpin,pos1,pos2,PCA9685::profile);
 void exrailHalSetup2() {
    #include "myAutomation.h"
+   // pullup any group sensors
+   SensorGroup::pullupAll();
 }
 
 // Pass 1c detect compile time featurtes

SensorGroup.cpp

@@ -0,0 +1,54 @@
+#include "SensorGroup.h"
+
+// called in loop to check sensors
+void SensorGroup::checkAll() {
+    #ifdef EXRAIL_ACTIVE
+    doExrailSensorGroup(GroupProcess::CHECK, & USB_SERIAL);
+    #endif
+}
+
+// called by command to get sensor list   
+void SensorGroup::printAll(Print * serial) {
+    #ifdef EXRAIL_ACTIVE
+    doExrailSensorGroup(GroupProcess::PRINT,serial);
+    #endif
+}
+
+void SensorGroup::pullupAll() {
+    #ifdef EXRAIL_ACTIVE
+    doExrailSensorGroup(GroupProcess::PULLUP, & USB_SERIAL);
+    #endif
+}
+
+// called by EXRAIL constructed doExrailSensorGroup for each group 
+void SensorGroup::doSensorGroup(VPIN firstVpin, int nPins, byte* statebits,
+  GroupProcess action, Print * serial) {
+  
+  // Loop through the pins in the group  
+  for (auto i=0;i<nPins;i++) {   
+    // locate position of state bit
+    byte stateByte=i/8;
+    byte stateMask=1<<(i%8);
+    VPIN vpin= firstVpin+i;
+    switch(action) {
+      case GroupProcess::PULLUP:
+          IODevice::configureInput(vpin, true);
+          __attribute__ ((fallthrough)); // to  check the current state 
+    
+      case GroupProcess::CHECK:
+         // check for state change
+         if ((bool)(statebits[stateByte]&stateMask) ==IODevice::read(vpin)) break; // no change  
+         // flip state bit
+         statebits[stateByte]^=stateMask;
+         if (action==GroupProcess::PULLUP) break; 
+         // fall through to print the changed value  
+        __attribute__ ((fallthrough));
+      
+      case GroupProcess::PRINT:
+        StringFormatter::send(serial, F("<%c %d>\n"), 
+         (statebits[stateByte]&stateMask)?'Q':'q', firstVpin+i);
+         break;
+    } 
+  }
+}
+    

SensorGroup.h

@@ -0,0 +1,24 @@
+#ifndef SensorGroup_h
+#define SensorGroup_h
+#include <Arduino.h>
+#include "defines.h"
+#include "IODevice.h"
+#include "StringFormatter.h"
+
+
+// reference to the optional exrail built function which contains the 
+// calls to SensorGroup::doSensorGroup 
+
+enum GroupProcess:byte {PULLUP,PRINT,CHECK};
+
+class SensorGroup {
+    public:
+     static void checkAll();
+     static void printAll(Print * serial);
+     static void pullupAll();
+     static void doSensorGroup(VPIN vpin, int nPins, byte* statebits,
+        GroupProcess action, Print * serial);
+     private: 
+       static void doExrailSensorGroup(GroupProcess action, Print * stream);  
+};
+#endif // SensorGroup_h

Sensors.cpp

@@ -91,6 +91,9 @@ decide to ignore the <q ID> return and only react to <Q ID> triggers.
 ///////////////////////////////////////////////////////////////////////////////
 
 void Sensor::checkAll(){
+
+  SensorGroup::checkAll();
+  
   uint16_t sensorCount = 0;
 
 #ifdef USE_NOTIFY
@@ -181,12 +184,13 @@ void Sensor::inputChangeCallback(VPIN vpin, int state) {
 ///////////////////////////////////////////////////////////////////////////////
 
 void Sensor::printAll(Print *stream){
-
+  
-  if (stream != NULL) {
+  if (stream == NULL) return; // Nothing to do
-    for(Sensor * tt=firstSensor;tt!=NULL;tt=tt->nextSensor){
+    
-      StringFormatter::send(stream, F("<%c %d>\n"), tt->active ? 'Q' : 'q', tt->data.snum);
+  SensorGroup::printAll(stream);
-    }
+  for(Sensor * tt=firstSensor;tt!=NULL;tt=tt->nextSensor){
-  } // loop over all sensors
+    StringFormatter::send(stream, F("<%c %d>\n"), tt->active ? 'Q' : 'q', tt->data.snum);
+  }
 } // Sensor::printAll
 
 ///////////////////////////////////////////////////////////////////////////////