diff --git a/myEX-Turntable.example.h b/myEX-Turntable.example.h
new file mode 100644
index 0000000..cbc1e54
--- /dev/null
+++ b/myEX-Turntable.example.h
@@ -0,0 +1,101 @@
+/**************************************************************************************************
+ * This is an example automation file to control EX-Turntable using recommended techniques.
+ ************************************************************************************************** 
+ * INSTRUCTIONS
+ ************************************************************************************************** 
+ * To use this example file as the starting point for your layout, there are two options:
+ * 
+ * 1. If you don't have an existing "myAutomation.h" file, simply rename "myEX-Turntable.example.h" to
+ *    "myAutomation.h".
+ * 2. If you have an existing "myAutomation.h" file, rename "myEX-Turntable.example.h" to "myEX-Turntable.h",
+ *    and then include it by adding the line below at the end of your existing "myAutomation.h", on a
+ *    line of its own:
+ * 
+ *    #include "myEX-Turntable.h"
+ * 
+ * Note that there are further instructions in the documentation at https://dcc-ex.com/.
+ *************************************************************************************************/
+
+/**************************************************************************************************
+ * The MOVETT() command below will automatically move your turntable to the defined step position on
+ * start up.
+ * 
+ * If you do not wish this to occur, simply comment the line out.
+ * 
+ * NOTE: If you are including this file at the end of an existing "myAutomation.h" file, you will likely
+ * need to move this line to the beginning of your existing "myAutomation.h" file in order for it to
+ * be effective.
+ *************************************************************************************************/
+MOVETT(600, 114, Turn)
+DONE
+
+// For Conductor level users who wish to just use EX-Turntable, you don't need to understand this
+// and can move to defining the turntable positions below. You must, however, ensure this remains
+// before any position definitions or you will get compile errors when uploading.
+//
+// Definition of the EX_TURNTABLE macro to correctly create the ROUTEs required for each position.
+// This includes RESERVE()/FREE() to protect any automation activities.
+//
+#define EX_TURNTABLE(route_id, reserve_id, vpin, steps, activity, desc) \
+  ROUTE(route_id, desc) \
+    RESERVE(reserve_id) \
+    MOVETT(vpin, steps, activity) \
+    WAITFOR(vpin) \
+    FREE(reserve_id) \
+    DONE
+
+/**************************************************************************************************
+ * TURNTABLE POSITION DEFINITIONS
+ *************************************************************************************************/
+// EX_TURNTABLE(route_id, reserve_id, vpin, steps, activity, desc)
+//
+// route_id = A unique number for each defined route, the route is what appears in throttles
+// reserve_id = A unique reservation number (0 - 255) to ensure nothing interferes with automation
+// vpin = The Vpin defined for the Turntable-EX device driver, default is 600
+// steps = The target step position
+// activity = The activity performed for this ROUTE (Note do not enclose in quotes "")
+// desc = Description that will appear in throttles (Must use quotes "")
+//
+EX_TURNTABLE(TTRoute1, Turntable, 600, 114, Turn, "Position 1")
+EX_TURNTABLE(TTRoute2, Turntable, 600, 227, Turn, "Position 2")
+EX_TURNTABLE(TTRoute3, Turntable, 600, 341, Turn, "Position 3")
+EX_TURNTABLE(TTRoute4, Turntable, 600, 2159, Turn, "Position 4")
+EX_TURNTABLE(TTRoute5, Turntable, 600, 2273, Turn, "Position 5")
+EX_TURNTABLE(TTRoute6, Turntable, 600, 2386, Turn, "Position 6")
+EX_TURNTABLE(TTRoute7, Turntable, 600, 0, Home, "Home turntable")
+
+// Pre-defined aliases to ensure unique IDs are used.
+// Turntable reserve ID, valid is 0 - 255
+ALIAS(Turntable, 255)
+
+// Turntable ROUTE ID reservations, using <? TTRouteX> for uniqueness:
+ALIAS(TTRoute1)
+ALIAS(TTRoute2)
+ALIAS(TTRoute3)
+ALIAS(TTRoute4)
+ALIAS(TTRoute5)
+ALIAS(TTRoute6)
+ALIAS(TTRoute7)
+ALIAS(TTRoute8)
+ALIAS(TTRoute9)
+ALIAS(TTRoute10)
+ALIAS(TTRoute11)
+ALIAS(TTRoute12)
+ALIAS(TTRoute13)
+ALIAS(TTRoute14)
+ALIAS(TTRoute15)
+ALIAS(TTRoute16)
+ALIAS(TTRoute17)
+ALIAS(TTRoute18)
+ALIAS(TTRoute19)
+ALIAS(TTRoute20)
+ALIAS(TTRoute21)
+ALIAS(TTRoute22)
+ALIAS(TTRoute23)
+ALIAS(TTRoute24)
+ALIAS(TTRoute25)
+ALIAS(TTRoute26)
+ALIAS(TTRoute27)
+ALIAS(TTRoute28)
+ALIAS(TTRoute29)
+ALIAS(TTRoute30)