ESP32-S3 initial compilation support

DCCTimerESP.cpp

@@ -83,16 +83,34 @@ int DCCTimer::freeMemory() {
 #include <soc/sens_struct.h>
 #undef ADC_INPUT_MAX_VALUE
 #define ADC_INPUT_MAX_VALUE 4095 // 12 bit ADC
+#if defined(ARDUINO_ESP32_DEV)
 #define pinToADC1Channel(X) (adc1_channel_t)(((X) > 35) ? (X)-36 : (X)-28)
+#elif defined(ARDUINO_ESP32S3_DEV)
+#define pinToADC1Channel(X) (adc1_channel_t)(((X) < 11) ? (X)-2 : (X)-11)
+#else
+#warning This ESP32 variant is not supported!
+#endif
 
 int IRAM_ATTR local_adc1_get_raw(int channel) {
   uint16_t adc_value;
+#if defined(ARDUINO_ESP32_DEV)
   SENS.sar_meas_start1.sar1_en_pad = (1 << channel); // only one channel is selected
   while (SENS.sar_slave_addr1.meas_status != 0);
   SENS.sar_meas_start1.meas1_start_sar = 0;
   SENS.sar_meas_start1.meas1_start_sar = 1;
   while (SENS.sar_meas_start1.meas1_done_sar == 0);
   adc_value = SENS.sar_meas_start1.meas1_data_sar;
+#elif defined(ARDUINO_ESP32S3_DEV)
+  // Between variants... Espressif decides to rename things... sigh
+  SENS.sar_meas1_ctrl2.sar1_en_pad = (1 << channel); // only one channel is selected
+  while (SENS.sar_slave_addr1.meas_status != 0);
+  SENS.sar_meas1_ctrl2.meas1_start_sar = 0;
+  SENS.sar_meas1_ctrl2.meas1_start_sar = 1;
+  while (SENS.sar_meas1_ctrl2.meas1_done_sar == 0);
+  adc_value = SENS.sar_meas1_ctrl2.meas1_data_sar;
+#else
+#warning This ESP32 variant is not supported!
+#endif
   return adc_value;
 }
 

WifiESP32.cpp

@@ -38,6 +38,7 @@
 #include "soc/timer_group_struct.h"
 #include "soc/timer_group_reg.h"
 void feedTheDog0(){
+#if defined(ARDUINO_ESP32_DEV)
   // feed dog 0
   TIMERG0.wdt_wprotect=TIMG_WDT_WKEY_VALUE; // write enable
   TIMERG0.wdt_feed=1;                       // feed dog
@@ -46,6 +47,13 @@ void feedTheDog0(){
   //TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE; // write enable
   //TIMERG1.wdt_feed=1;                       // feed dog
   //TIMERG1.wdt_wprotect=0;                   // write protect
+#elif defined(ARDUINO_ESP32S3_DEV)
+  TIMERG0.wdtwprotect.wdt_wkey = TIMG_WDT_WKEY_V;       // write enable
+  TIMERG0.wdtfeed.wdt_feed = 1;                       // feed dog
+  TIMERG0.wdtwprotect.wdt_wkey = 0;                   // write protect
+#else
+#warning This ESP32 variant not supported
+#endif
 }
 
 /*

WifiESP32.h

@@ -37,5 +37,5 @@ public:
   static void loop();
 private:
 };
-#endif //WifiESP8266_h
-#endif //ESP8266
+#endif // include guard
+#endif // ARDUINO_ARCH_ESP32

defines.h

@@ -125,9 +125,15 @@
   #define ARDUINO_TYPE "ESP8266"
   #warning "ESP8266 platform untested, you are on your own"
 #elif defined(ARDUINO_ARCH_ESP32)
-  #define ARDUINO_TYPE "ESP32"
   #ifndef DISABLE_EEPROM
   #define DISABLE_EEPROM
+#if defined(ARDUINO_ESP32_DEV)
+  #define ARDUINO_TYPE "ESP32-WROOM"
+#elif defined (ARDUINO_ESP32S3_DEV)
+  #define ARDUINO_TYPE "ESP32-S3"
+//   #undef USB_SERIAL
+//   #define USB_SERIAL SerialUSB
+#endif
   #endif
 #elif defined(ARDUINO_ARCH_SAMD)
   #define ARDUINO_TYPE "SAMD21"

platformio.ini

@@ -30,7 +30,6 @@ include_dir = .
 
 [env]
 build_flags = -Wall -Wextra
-; monitor_filters = time
 
 [env:samd21-dev-usb]
 platform = atmelsam
@@ -193,9 +192,6 @@ build_flags = -std=c++17  -Os -g2 -Wunused-variable
 monitor_speed = 115200
 monitor_echo = yes
 
-; Experimental - no reason this should not work, but not
-; tested as yet
-;
 [env:Nucleo-F401RE]
 platform = ststm32
 board = nucleo_f401re
@@ -205,59 +201,6 @@ build_flags = -std=c++17  -Os -g2 -Wunused-variable
 monitor_speed = 115200
 monitor_echo = yes
 
-; Commented out by default as the F13ZH has variant files
-; but NOT the nucleo_f413zh.json file which needs to be
-; installed before you can let PlatformIO see this
-;
-; [env:Nucleo-F413ZH]
-; platform = ststm32
-; board = nucleo_f413zh
-; framework = arduino
-; lib_deps = ${env.lib_deps}
-; build_flags = -std=c++17  -Os -g2 -Wunused-variable
-; monitor_speed = 115200
-; monitor_echo = yes
-
-; Commented out by default as the F446ZE needs variant files
-; installed before you can let PlatformIO see this
-;
-; [env:Nucleo-F446ZE]
-; platform = ststm32
-; board = nucleo_f446ze
-; framework = arduino
-; lib_deps = ${env.lib_deps}
-; build_flags = -std=c++17  -Os -g2 -Wunused-variable
-; monitor_speed = 115200
-; monitor_echo = yes
-
-; Commented out by default as the F412ZG needs variant files
-; installed before you can let PlatformIO see this
-;
-; [env:Nucleo-F412ZG]
-; platform = ststm32
-; board = blah_f412zg
-; framework = arduino
-; lib_deps = ${env.lib_deps}
-; build_flags = -std=c++17 -Os -g2 -Wunused-variable
-; monitor_speed = 115200
-; monitor_echo = yes
-; upload_protocol = stlink
-
-; Experimental - Ethernet work still in progress
-;
-; [env:Nucleo-F429ZI]
-; platform = ststm32
-; board = nucleo_f429zi
-; framework = arduino
-; lib_deps = ${env.lib_deps}
-; 			arduino-libraries/Ethernet @ ^2.0.1
-; 			stm32duino/STM32Ethernet @ ^1.3.0
-; 			stm32duino/STM32duino LwIP @ ^2.1.2
-; build_flags = -std=c++17 -Os -g2 -Wunused-variable
-; monitor_speed = 115200
-; monitor_echo = yes
-; upload_protocol = stlink
-
 [env:Teensy3_2]
 platform = teensy
 board = teensy31
@@ -296,4 +239,18 @@ board = teensy41
 framework = arduino
 build_flags = -std=c++17  -Os -g2
 lib_deps = ${env.lib_deps}
-lib_ignore =
+lib_ignore = 
+
+[env:ESP32_S3]
+platform = espressif32
+board = esp32-s3-devkitc-1
+framework = arduino
+board_upload.flash_size = 8MB
+board_build.partitions = default_8MB.csv
+build_flags = 
+	-std=c++17
+    -DARDUINO_USB_CDC_ON_BOOT=1
+board_build.arduino.memory_type = opi_opi
+lib_deps = ${env.lib_deps}
+monitor_speed = 115200
+monitor_echo = yes

version.h

@@ -3,7 +3,8 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.1"
+#define VERSION "5.2.2"
+// 5.2.2  - ESP32-S3 initial code support, WDT, ADCee(), but note RMT not tested!
 // 5.2.1  - Trackmanager rework for simpler structure
 // 5.2.0  - ESP32: Autoreverse and booster mode support
 // 5.1.21 - EXRAIL invoke multiple ON handlers for same event