Merge 13bb1175f3 into 33b2820095

DCCTimer.h

@@ -3,6 +3,7 @@
  *  © 2021 Mike S
  *  © 2021-2023 Harald Barth
  *  © 2021 Fred Decker
+ *  © 2023 Travis Farmer
  *  All rights reserved.
  *  
  *  This file is part of CommandStation-EX
@@ -90,6 +91,8 @@ private:
   static const int DCC_SIGNAL_TIME=58;  // this is the 58uS DCC 1-bit waveform half-cycle 
 #if defined(ARDUINO_ARCH_STM32)  // TODO: PMA temporary hack - assumes 100Mhz F_CPU as STM32 can change frequency
   static const long CLOCK_CYCLES=(100000000L / 1000000 * DCC_SIGNAL_TIME) >>1;
+#elif defined(ARDUINO_GIGA)
+  static const long CLOCK_CYCLES=(480000000L / 1000000 * DCC_SIGNAL_TIME) >>1;
 #else
   static const long CLOCK_CYCLES=(F_CPU / 1000000 * DCC_SIGNAL_TIME) >>1;
 #endif

DCCTimerGiga.cpp

@@ -0,0 +1,206 @@
+/*
+ *  © 2023 Travis Farmer
+ *  © 2023 Neil McKechnie
+ *  © 2022-2023 Paul M. Antoine
+ *  © 2021 Mike S
+ *  © 2021, 2023 Harald Barth
+ *  © 2021 Fred Decker
+ *  © 2021 Chris Harlow
+ *  © 2021 David Cutting
+ *  All rights reserved.
+ *  
+ *  This file is part of Asbelos DCC API
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+// ATTENTION: this file only compiles on a STM32 based boards
+// Please refer to DCCTimer.h for general comments about how this class works
+// This is to avoid repetition and duplication.
+#if defined(ARDUINO_GIGA)
+
+#include "DCCTimer.h"
+#include "DIAG.h"
+#include "GigaHardwareTimer.h"
+#include <Arduino_AdvancedAnalog.h>
+//#include "config.h"
+///////////////////////////////////////////////////////////////////////////////////////////////
+// Experimental code for High Accuracy (HA) DCC Signal mode
+// Warning - use of TIM2 and TIM3 can affect the use of analogWrite() function on certain pins,
+// which is used by the DC motor types.
+///////////////////////////////////////////////////////////////////////////////////////////////
+
+INTERRUPT_CALLBACK interruptHandler=0;
+
+//HardwareTimer*  timer = NULL;
+//HardwareTimer*  timerAux = NULL;
+HardwareTimer timer(TIM2);
+HardwareTimer timerAux(TIM3);
+
+static bool tim2ModeHA = false;
+static bool tim3ModeHA = false;
+
+void DCCTimer_Handler() __attribute__((interrupt));
+
+void DCCTimer_Handler() {
+  interruptHandler();
+}
+
+void DCCTimer::begin(INTERRUPT_CALLBACK callback) {
+  interruptHandler=callback;
+    noInterrupts();
+    
+ // adc_set_sample_rate(ADC_SAMPLETIME_480CYCLES);
+    timer.pause();
+    timerAux.pause();
+    timer.setPrescaleFactor(1);
+    timer.setOverflow(DCC_SIGNAL_TIME, MICROSEC_FORMAT);
+    timer.attachInterrupt(DCCTimer_Handler);
+    timer.refresh();
+    timerAux.setPrescaleFactor(1);
+    timerAux.setOverflow(DCC_SIGNAL_TIME, MICROSEC_FORMAT);
+    timerAux.refresh();
+
+    timer.resume();
+    timerAux.resume();
+
+    interrupts();
+}
+
+bool DCCTimer::isPWMPin(byte pin) {
+    switch (pin) {
+     case 12:
+       return true;
+     case 13:
+       return true;
+     default:
+       return false;
+    }
+}
+
+void DCCTimer::setPWM(byte pin, bool high) {
+    switch (pin) {
+     case 12:
+       if (!tim3ModeHA) {
+         timerAux.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, 12);
+         tim3ModeHA = true;
+       }
+       if (high) 
+         TIM2->CCMR1 = (TIM2->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_0;
+       else
+         TIM2->CCMR1 = (TIM2->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_1;
+       break;
+     case 13:
+       if (!tim2ModeHA) {
+         timer.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, 13);
+         tim2ModeHA = true;
+       }
+       if (high) 
+         TIM3->CCMR1 = (TIM3->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_0;
+       else
+         TIM3->CCMR1 = (TIM3->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_1;
+       break;
+   }
+ }
+
+void DCCTimer::clearPWM() {
+  timer.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, NC);
+  tim2ModeHA = false;
+  timerAux.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, NC);  
+  tim3ModeHA = false;
+}
+
+void   DCCTimer::getSimulatedMacAddress(byte mac[6]) {
+  volatile uint32_t *serno1 = (volatile uint32_t *)UID_BASE;
+  volatile uint32_t *serno2 = (volatile uint32_t *)UID_BASE+4;
+  volatile uint32_t *serno3 = (volatile uint32_t *)UID_BASE+8;
+  volatile uint32_t m1 = *serno1;
+  volatile uint32_t m2 = *serno2;
+  volatile uint32_t m3 = *serno3;
+  mac[0] = 0xBE;
+  mac[1] = 0xEF;
+  mac[2] = m1 ^ m3 >> 24;
+  mac[3] = m1 ^ m3 >> 16;
+  mac[4] = m1 ^ m3 >> 8;
+  mac[5] = m1 ^ m3 >> 0;
+  //DIAG(F("MAC: %P:%P:%P:%P:%P:%P"),mac[0],mac[1],mac[2],mac[3],mac[4],mac[5]);
+
+}
+volatile int DCCTimer::minimum_free_memory=__INT_MAX__;
+
+// Return low memory value... 
+int DCCTimer::getMinimumFreeMemory() {
+  noInterrupts(); // Disable interrupts to get volatile value 
+  int retval = freeMemory();
+  interrupts();
+  return retval;
+}
+extern "C" char* sbrk(int incr);
+
+int DCCTimer::freeMemory() {
+  
+  char top;
+  unsigned int tmp = (unsigned int)(&top - reinterpret_cast<char*>(sbrk(0)));
+  return (int)(tmp / 1000);
+}
+
+void DCCTimer::reset() {
+  //Watchdog &watchdog = Watchdog::get_instance();
+  //Watchdog::stop();
+  //Watchdog::start(500);
+  
+  //while(true) {};
+}
+
+int * ADCee::analogvals = NULL;
+
+int16_t ADCee::ADCmax()
+{
+    return 1023;
+}
+
+AdvancedADC adc(A0, A1);
+int ADCee::init(uint8_t pin) {
+  adc.begin(AN_RESOLUTION_10, 16000, 1, 512);
+  return 123;
+}
+
+/*
+ * Read function ADCee::read(pin) to get value instead of analogRead(pin)
+ */
+int ADCee::read(uint8_t pin, bool fromISR) {
+  static SampleBuffer buf = adc.read();
+  int retVal = -123;
+  if (adc.available()) {
+    buf.release();
+    buf = adc.read();
+  }
+  return (buf[pin - A0]);
+}
+
+/*
+ * Scan function that is called from interrupt
+ */
+#pragma GCC push_options
+#pragma GCC optimize ("-O3")
+void ADCee::scan() {
+}
+#pragma GCC pop_options
+
+void ADCee::begin() {
+  noInterrupts();
+  
+  interrupts();
+}
+#endif

EEStore.cpp

@@ -31,12 +31,12 @@
 #include "Sensors.h"
 #include "Turnouts.h"
 
-#if defined(ARDUINO_ARCH_SAMC)
+#if defined(ARDUINO_ARCH_SAMC) || defined(ARDUINO_GIGA)
 ExternalEEPROM EEPROM;
 #endif
 
 void EEStore::init() {
-#if defined(ARDUINO_ARCH_SAMC)
+#if defined(ARDUINO_ARCH_SAMC) || defined(ARDUINO_GIGA)
   EEPROM.begin(0x50);  // Address for Microchip 24-series EEPROM with all three
                        // A pins grounded (0b1010000 = 0x50)
 #endif

EEStore.h

@@ -26,7 +26,7 @@
 
 #include <Arduino.h>
 
-#if defined(ARDUINO_ARCH_SAMC)
+#if defined(ARDUINO_ARCH_SAMC) || defined(ARDUINO_GIGA)
 #include <SparkFun_External_EEPROM.h>
 extern ExternalEEPROM EEPROM;
 #else

GigaHardwareTimer.h

@@ -0,0 +1,220 @@
+/****************************************************************************************************************************
+  HardwareTimer.h
+
+  For Portenta_H7 boards
+  Written by Khoi Hoang
+
+  Built by Khoi Hoang https://github.com/khoih-prog/Portenta_H7_TimerInterrupt
+  Licensed under MIT license
+
+  Now even you use all these new 16 ISR-based timers,with their maximum interval practically unlimited (limited only by
+  unsigned long miliseconds), you just consume only one Portenta_H7 STM32 timer and avoid conflicting with other cores' tasks.
+  The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
+  Therefore, their executions are not blocked by bad-behaving functions / tasks.
+  This important feature is absolutely necessary for mission-critical tasks.
+
+  Version: 1.4.0
+
+  Version Modified By   Date      Comments
+  ------- -----------  ---------- -----------
+  1.2.1   K.Hoang      15/09/2021 Initial coding for Portenta_H7
+  1.3.0   K.Hoang      17/09/2021 Add PWM features and examples
+  1.3.1   K.Hoang      21/09/2021 Fix warnings in PWM examples
+  1.4.0   K.Hoang      22/01/2022 Fix `multiple-definitions` linker error. Fix bug
+ *****************************************************************************************************************************/
+
+// Modified from stm32 core v2.0.0
+
+/*
+  Copyright (c) 2017 Daniel Fekete
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+  SOFTWARE.
+
+  Copyright (c) 2019 STMicroelectronics
+  Modified to support Arduino_Core_STM32
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef GIGAHARDWARETIMER_H_
+#define GIGAHARDWARETIMER_H_
+#if defined(ARDUINO_GIGA)
+/* Includes ------------------------------------------------------------------*/
+#include "Gigatimer.h"
+
+#if defined(HAL_TIM_MODULE_ENABLED) && !defined(HAL_TIM_MODULE_ONLY)
+
+#define  TIMER_CHANNELS 4    // channel5 and channel 6 are not considered here has they don't have gpio output and they don't have interrupt
+
+typedef enum
+{
+  TIMER_DISABLED,                         // == TIM_OCMODE_TIMING           no output, useful for only-interrupt
+  // Output Compare
+  TIMER_OUTPUT_COMPARE,                   // == Obsolete, use TIMER_DISABLED instead. Kept for compatibility reason
+  TIMER_OUTPUT_COMPARE_ACTIVE,            // == TIM_OCMODE_ACTIVE           pin is set high when counter == channel compare
+  TIMER_OUTPUT_COMPARE_INACTIVE,          // == TIM_OCMODE_INACTIVE         pin is set low when counter == channel compare
+  TIMER_OUTPUT_COMPARE_TOGGLE,            // == TIM_OCMODE_TOGGLE           pin toggles when counter == channel compare
+  TIMER_OUTPUT_COMPARE_PWM1,              // == TIM_OCMODE_PWM1             pin high when counter < channel compare, low otherwise
+  TIMER_OUTPUT_COMPARE_PWM2,              // == TIM_OCMODE_PWM2             pin low when counter < channel compare, high otherwise
+  TIMER_OUTPUT_COMPARE_FORCED_ACTIVE,     // == TIM_OCMODE_FORCED_ACTIVE    pin always high
+  TIMER_OUTPUT_COMPARE_FORCED_INACTIVE,   // == TIM_OCMODE_FORCED_INACTIVE  pin always low
+
+  //Input capture
+  TIMER_INPUT_CAPTURE_RISING,             // == TIM_INPUTCHANNELPOLARITY_RISING
+  TIMER_INPUT_CAPTURE_FALLING,            // == TIM_INPUTCHANNELPOLARITY_FALLING
+  TIMER_INPUT_CAPTURE_BOTHEDGE,           // == TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+  // Used 2 channels for a single pin. One channel in TIM_INPUTCHANNELPOLARITY_RISING another channel in TIM_INPUTCHANNELPOLARITY_FALLING.
+  // Channels must be used by pair: CH1 with CH2, or CH3 with CH4
+  // This mode is very useful for Frequency and Dutycycle measurement
+  TIMER_INPUT_FREQ_DUTY_MEASUREMENT,
+
+  TIMER_NOT_USED = 0xFFFF  // This must be the last item of this enum
+} TimerModes_t;
+
+typedef enum
+{
+  TICK_FORMAT, // default
+  MICROSEC_FORMAT,
+  HERTZ_FORMAT,
+} TimerFormat_t;
+
+typedef enum
+{
+  RESOLUTION_1B_COMPARE_FORMAT = 1,  // used for Dutycycle: [0 .. 1]
+  RESOLUTION_2B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 3]
+  RESOLUTION_3B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 7]
+  RESOLUTION_4B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 15]
+  RESOLUTION_5B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 31]
+  RESOLUTION_6B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 63]
+  RESOLUTION_7B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 127]
+  RESOLUTION_8B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 255]
+  RESOLUTION_9B_COMPARE_FORMAT,      // used for Dutycycle: [0 .. 511]
+  RESOLUTION_10B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 1023]
+  RESOLUTION_11B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 2047]
+  RESOLUTION_12B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 4095]
+  RESOLUTION_13B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 8191]
+  RESOLUTION_14B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 16383]
+  RESOLUTION_15B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 32767]
+  RESOLUTION_16B_COMPARE_FORMAT,     // used for Dutycycle: [0 .. 65535]
+
+  TICK_COMPARE_FORMAT = 0x80, // default
+  MICROSEC_COMPARE_FORMAT,
+  HERTZ_COMPARE_FORMAT,
+  PERCENT_COMPARE_FORMAT, // used for Dutycycle
+} TimerCompareFormat_t;
+
+#ifdef __cplusplus
+
+#include <functional>
+using callback_function_t = std::function<void(void)>;
+
+/* Class --------------------------------------------------------*/
+class HardwareTimer
+{
+  public:
+    HardwareTimer(TIM_TypeDef *instance);
+    ~HardwareTimer();  // destructor
+
+    void pause(void);  // Pause counter and all output channels
+    void pauseChannel(uint32_t channel); // Timer is still running but channel (output and interrupt) is disabled
+    void resume(void); // Resume counter and all output channels
+    void resumeChannel(uint32_t channel); // Resume only one channel
+
+    void setPrescaleFactor(uint32_t prescaler); // set prescaler register (which is factor value - 1)
+    uint32_t getPrescaleFactor();
+
+    void setOverflow(uint32_t val, TimerFormat_t format =
+                       TICK_FORMAT); // set AutoReload register depending on format provided
+    uint32_t getOverflow(TimerFormat_t format = TICK_FORMAT); // return overflow depending on format provided
+
+    void setPWM(uint32_t channel, PinName pin, uint32_t frequency, uint32_t dutycycle,
+                callback_function_t PeriodCallback = nullptr,
+                callback_function_t CompareCallback = nullptr); // Set all in one command freq in HZ, Duty in percentage. Including both interrup.
+    void setPWM(uint32_t channel, uint32_t pin, uint32_t frequency, uint32_t dutycycle,
+                callback_function_t PeriodCallback = nullptr, callback_function_t CompareCallback = nullptr);
+
+    void setCount(uint32_t val, TimerFormat_t format =
+                    TICK_FORMAT); // set timer counter to value 'val' depending on format provided
+    uint32_t getCount(TimerFormat_t format =
+                        TICK_FORMAT);  // return current counter value of timer depending on format provided
+
+    void setMode(uint32_t channel, TimerModes_t mode,
+                 PinName pin = NC); // Configure timer channel with specified mode on specified pin if available
+    void setMode(uint32_t channel, TimerModes_t mode, uint32_t pin);
+
+    TimerModes_t getMode(uint32_t channel);  // Retrieve configured mode
+
+    void setPreloadEnable(bool value); // Configure overflow preload enable setting
+
+    uint32_t getCaptureCompare(uint32_t channel,
+                               TimerCompareFormat_t format = TICK_COMPARE_FORMAT); // return Capture/Compare register value of specified channel depending on format provided
+    void setCaptureCompare(uint32_t channel, uint32_t compare,
+                           TimerCompareFormat_t format = TICK_COMPARE_FORMAT);  // set Compare register value of specified channel depending on format provided
+
+    void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority); // set interrupt priority
+
+    //Add interrupt to period update
+    void attachInterrupt(callback_function_t
+                         callback); // Attach interrupt callback which will be called upon update event (timer rollover)
+    void detachInterrupt();  // remove interrupt callback which was attached to update event
+    bool hasInterrupt();  //returns true if a timer rollover interrupt has already been set
+    //Add interrupt to capture/compare channel
+    void attachInterrupt(uint32_t channel,
+                         callback_function_t callback); // Attach interrupt callback which will be called upon compare match event of specified channel
+    void detachInterrupt(uint32_t
+                         channel);  // remove interrupt callback which was attached to compare match event of specified channel
+    bool hasInterrupt(uint32_t channel);  //returns true if an interrupt has already been set on the channel compare match
+    void timerHandleDeinit();  // Timer deinitialization
+
+    // Refresh() is usefull while timer is running after some registers update
+    void refresh(
+      void); // Generate update event to force all registers (Autoreload, prescaler, compare) to be taken into account
+
+    uint32_t getTimerClkFreq();  // return timer clock frequency in Hz.
+
+    static void captureCompareCallback(TIM_HandleTypeDef
+                                       *htim); // Generic Caputre and Compare callback which will call user callback
+    static void updateCallback(TIM_HandleTypeDef
+                               *htim);  // Generic Update (rollover) callback which will call user callback
+
+    // The following function(s) are available for more advanced timer options
+    TIM_HandleTypeDef *getHandle();  // return the handle address for HAL related configuration
+    int getChannel(uint32_t channel);
+    int getLLChannel(uint32_t channel);
+    int getIT(uint32_t channel);
+    int getAssociatedChannel(uint32_t channel);
+#if defined(TIM_CCER_CC1NE)
+    bool isComplementaryChannel[TIMER_CHANNELS];
+#endif
+  private:
+    TimerModes_t  _ChannelMode[TIMER_CHANNELS];
+    timerObj_t _timerObj;
+    callback_function_t callbacks[1 +
+                                    TIMER_CHANNELS]; //Callbacks: 0 for update, 1-4 for channels. (channel5/channel6, if any, doesn't have interrupt)
+};
+
+extern timerObj_t *HardwareTimer_Handle[TIMER_NUM];
+
+extern timer_index_t get_timer_index(TIM_TypeDef *htim);
+
+#endif /* __cplusplus */
+
+#endif  // HAL_TIM_MODULE_ENABLED && !HAL_TIM_MODULE_ONLY
+#endif
+#endif  // GIGAHARDWARETIMER_H_

Gigatimer.c

@@ -0,0 +1,950 @@
+/****************************************************************************************************************************
+  timer.c
+
+  For Portenta_H7 boards
+  Written by Khoi Hoang
+
+  Built by Khoi Hoang https://github.com/khoih-prog/Portenta_H7_TimerInterrupt
+  Licensed under MIT license
+
+  Now even you use all these new 16 ISR-based timers,with their maximum interval practically unlimited (limited only by
+  unsigned long miliseconds), you just consume only one Portenta_H7 STM32 timer and avoid conflicting with other cores' tasks.
+  The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
+  Therefore, their executions are not blocked by bad-behaving functions / tasks.
+  This important feature is absolutely necessary for mission-critical tasks.
+
+  Version: 1.4.0
+
+  Version Modified By   Date      Comments
+  ------- -----------  ---------- -----------
+  1.2.1   K.Hoang      15/09/2021 Initial coding for Portenta_H7
+  1.3.0   K.Hoang      17/09/2021 Add PWM features and examples
+  1.3.1   K.Hoang      21/09/2021 Fix warnings in PWM examples
+  1.4.0   K.Hoang      22/01/2022 Fix `multiple-definitions` linker error. Fix bug
+ *****************************************************************************************************************************/
+
+// Modified from stm32 core v2.0.0
+/*
+ *******************************************************************************
+   Copyright (c) 2019, STMicroelectronics
+   All rights reserved.
+
+   This software component is licensed by ST under BSD 3-Clause license,
+   the "License"; You may not use this file except in compliance with the
+   License. You may obtain a copy of the License at:
+                          opensource.org/licenses/BSD-3-Clause
+
+ *******************************************************************************
+*/
+#if defined(ARDUINO_GIGA)
+#include "Gigatimer.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if defined(HAL_TIM_MODULE_ENABLED) && !defined(HAL_TIM_MODULE_ONLY)
+
+/* Private Functions */
+/* Aim of the function is to get _timerObj pointer using htim pointer */
+/* Highly inspired from magical linux kernel's "container_of" */
+/* (which was not directly used since not compatible with IAR toolchain) */
+timerObj_t *get_timer_obj(TIM_HandleTypeDef *htim)
+{
+  timerObj_t *obj;
+  obj = (timerObj_t *)((char *)htim - offsetof(timerObj_t, handle));
+  return (obj);
+}
+
+/**
+    @brief  TIMER Initialization - clock init and nvic init
+    @param  htim_base: TIM handle
+    @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim_base)
+{
+  timerObj_t *obj = get_timer_obj(htim_base);
+  enableTimerClock(htim_base);
+
+  // configure Update interrupt
+  HAL_NVIC_SetPriority(getTimerUpIrq(htim_base->Instance), obj->preemptPriority, obj->subPriority);
+  HAL_NVIC_EnableIRQ(getTimerUpIrq(htim_base->Instance));
+
+  if (getTimerCCIrq(htim_base->Instance) != getTimerUpIrq(htim_base->Instance))
+  {
+    // configure Capture Compare interrupt
+    HAL_NVIC_SetPriority(getTimerCCIrq(htim_base->Instance), obj->preemptPriority, obj->subPriority);
+    HAL_NVIC_EnableIRQ(getTimerCCIrq(htim_base->Instance));
+  }
+}
+
+/**
+    @brief  TIMER Deinitialization - clock and nvic
+    @param  htim_base: TIM handle
+    @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim_base)
+{
+  disableTimerClock(htim_base);
+  HAL_NVIC_DisableIRQ(getTimerUpIrq(htim_base->Instance));
+  HAL_NVIC_DisableIRQ(getTimerCCIrq(htim_base->Instance));
+}
+
+/**
+    @brief  Initializes the TIM Output Compare MSP.
+    @param  htim: TIM handle
+    @retval None
+*/
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+  timerObj_t *obj = get_timer_obj(htim);
+  enableTimerClock(htim);
+
+  // configure Update interrupt
+  HAL_NVIC_SetPriority(getTimerUpIrq(htim->Instance), obj->preemptPriority, obj->subPriority);
+  HAL_NVIC_EnableIRQ(getTimerUpIrq(htim->Instance));
+
+  if (getTimerCCIrq(htim->Instance) != getTimerUpIrq(htim->Instance))
+  {
+    // configure Capture Compare interrupt
+    HAL_NVIC_SetPriority(getTimerCCIrq(htim->Instance), obj->preemptPriority, obj->subPriority);
+    HAL_NVIC_EnableIRQ(getTimerCCIrq(htim->Instance));
+  }
+}
+
+/**
+    @brief  DeInitialize TIM Output Compare MSP.
+    @param  htim: TIM handle
+    @retval None
+*/
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  disableTimerClock(htim);
+  HAL_NVIC_DisableIRQ(getTimerUpIrq(htim->Instance));
+  HAL_NVIC_DisableIRQ(getTimerCCIrq(htim->Instance));
+}
+
+/**
+    @brief  Initializes the TIM Input Capture MSP.
+    @param  htim: TIM handle
+    @retval None
+*/
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+  enableTimerClock(htim);
+}
+
+/**
+    @brief  DeInitialize TIM Input Capture MSP.
+    @param  htim: TIM handle
+    @retval None
+*/
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  disableTimerClock(htim);
+}
+
+/* Exported functions */
+/**
+    @brief  Enable the timer clock
+    @param  htim: TIM handle
+    @retval None
+*/
+void enableTimerClock(TIM_HandleTypeDef *htim)
+{
+  // Enable TIM clock
+#if defined(TIM1_BASE)
+  if (htim->Instance == TIM1)
+  {
+    __HAL_RCC_TIM1_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM2_BASE)
+
+  if (htim->Instance == TIM2)
+  {
+    __HAL_RCC_TIM2_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM3_BASE)
+
+  if (htim->Instance == TIM3)
+  {
+    __HAL_RCC_TIM3_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM4_BASE)
+
+  if (htim->Instance == TIM4)
+  {
+    __HAL_RCC_TIM4_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM5_BASE)
+
+  if (htim->Instance == TIM5)
+  {
+    __HAL_RCC_TIM5_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM6_BASE)
+
+  if (htim->Instance == TIM6)
+  {
+    __HAL_RCC_TIM6_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM7_BASE)
+
+  if (htim->Instance == TIM7)
+  {
+    __HAL_RCC_TIM7_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM8_BASE)
+
+  if (htim->Instance == TIM8)
+  {
+    __HAL_RCC_TIM8_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM9_BASE)
+
+  if (htim->Instance == TIM9)
+  {
+    __HAL_RCC_TIM9_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM10_BASE)
+
+  if (htim->Instance == TIM10)
+  {
+    __HAL_RCC_TIM10_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM11_BASE)
+
+  if (htim->Instance == TIM11)
+  {
+    __HAL_RCC_TIM11_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM12_BASE)
+
+  if (htim->Instance == TIM12)
+  {
+    __HAL_RCC_TIM12_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM13_BASE)
+
+  if (htim->Instance == TIM13)
+  {
+    __HAL_RCC_TIM13_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM14_BASE)
+
+  if (htim->Instance == TIM14)
+  {
+    __HAL_RCC_TIM14_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM15_BASE)
+
+  if (htim->Instance == TIM15)
+  {
+    __HAL_RCC_TIM15_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM16_BASE)
+
+  if (htim->Instance == TIM16)
+  {
+    __HAL_RCC_TIM16_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM17_BASE)
+
+  if (htim->Instance == TIM17)
+  {
+    __HAL_RCC_TIM17_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM18_BASE)
+
+  if (htim->Instance == TIM18)
+  {
+    __HAL_RCC_TIM18_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM19_BASE)
+
+  if (htim->Instance == TIM19)
+  {
+    __HAL_RCC_TIM19_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM20_BASE)
+
+  if (htim->Instance == TIM20)
+  {
+    __HAL_RCC_TIM20_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM21_BASE)
+
+  if (htim->Instance == TIM21)
+  {
+    __HAL_RCC_TIM21_CLK_ENABLE();
+  }
+
+#endif
+#if defined(TIM22_BASE)
+
+  if (htim->Instance == TIM22)
+  {
+    __HAL_RCC_TIM22_CLK_ENABLE();
+  }
+
+#endif
+}
+
+/**
+    @brief  Disable the timer clock
+    @param  htim: TIM handle
+    @retval None
+*/
+void disableTimerClock(TIM_HandleTypeDef *htim)
+{
+  // Enable TIM clock
+#if defined(TIM1_BASE)
+  if (htim->Instance == TIM1)
+  {
+    __HAL_RCC_TIM1_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM2_BASE)
+
+  if (htim->Instance == TIM2)
+  {
+    __HAL_RCC_TIM2_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM3_BASE)
+
+  if (htim->Instance == TIM3)
+  {
+    __HAL_RCC_TIM3_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM4_BASE)
+
+  if (htim->Instance == TIM4)
+  {
+    __HAL_RCC_TIM4_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM5_BASE)
+
+  if (htim->Instance == TIM5)
+  {
+    __HAL_RCC_TIM5_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM6_BASE)
+
+  if (htim->Instance == TIM6)
+  {
+    __HAL_RCC_TIM6_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM7_BASE)
+
+  if (htim->Instance == TIM7)
+  {
+    __HAL_RCC_TIM7_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM8_BASE)
+
+  if (htim->Instance == TIM8)
+  {
+    __HAL_RCC_TIM8_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM9_BASE)
+
+  if (htim->Instance == TIM9)
+  {
+    __HAL_RCC_TIM9_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM10_BASE)
+
+  if (htim->Instance == TIM10)
+  {
+    __HAL_RCC_TIM10_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM11_BASE)
+
+  if (htim->Instance == TIM11)
+  {
+    __HAL_RCC_TIM11_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM12_BASE)
+
+  if (htim->Instance == TIM12)
+  {
+    __HAL_RCC_TIM12_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM13_BASE)
+
+  if (htim->Instance == TIM13)
+  {
+    __HAL_RCC_TIM13_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM14_BASE)
+
+  if (htim->Instance == TIM14)
+  {
+    __HAL_RCC_TIM14_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM15_BASE)
+
+  if (htim->Instance == TIM15)
+  {
+    __HAL_RCC_TIM15_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM16_BASE)
+
+  if (htim->Instance == TIM16)
+  {
+    __HAL_RCC_TIM16_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM17_BASE)
+
+  if (htim->Instance == TIM17)
+  {
+    __HAL_RCC_TIM17_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM18_BASE)
+
+  if (htim->Instance == TIM18)
+  {
+    __HAL_RCC_TIM18_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM19_BASE)
+
+  if (htim->Instance == TIM19)
+  {
+    __HAL_RCC_TIM19_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM20_BASE)
+
+  if (htim->Instance == TIM20)
+  {
+    __HAL_RCC_TIM20_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM21_BASE)
+
+  if (htim->Instance == TIM21)
+  {
+    __HAL_RCC_TIM21_CLK_DISABLE();
+  }
+
+#endif
+#if defined(TIM22_BASE)
+
+  if (htim->Instance == TIM22)
+  {
+    __HAL_RCC_TIM22_CLK_DISABLE();
+  }
+
+#endif
+}
+
+/**
+    @brief  This function return IRQ number corresponding to update interrupt event of timer instance.
+    @param  tim: timer instance
+    @retval IRQ number
+*/
+IRQn_Type getTimerUpIrq(TIM_TypeDef *tim)
+{
+  IRQn_Type IRQn = NonMaskableInt_IRQn;
+
+  if (tim != (TIM_TypeDef *)NC)
+  {
+    /* Get IRQn depending on TIM instance */
+    switch ((uint32_t)tim)
+    {
+#if defined(TIM1_BASE)
+
+      case (uint32_t)TIM1_BASE:
+        IRQn = TIM1_IRQn;
+        break;
+#endif
+#if defined(TIM2_BASE)
+
+      case (uint32_t)TIM2_BASE:
+        IRQn = TIM2_IRQn;
+        break;
+#endif
+#if defined(TIM3_BASE)
+
+      case (uint32_t)TIM3_BASE:
+        IRQn = TIM3_IRQn;
+        break;
+#endif
+#if defined(TIM4_BASE)
+
+      case (uint32_t)TIM4_BASE:
+        IRQn = TIM4_IRQn;
+        break;
+#endif
+#if defined(TIM5_BASE)
+
+      case (uint32_t)TIM5_BASE:
+        IRQn = TIM5_IRQn;
+        break;
+#endif
+
+        // KH
+#if 0
+#if defined(TIM6_BASE)
+
+      case (uint32_t)TIM6_BASE:
+        IRQn = TIM6_IRQn;
+        break;
+#endif
+#endif
+        //////
+
+#if defined(TIM7_BASE)
+
+      case (uint32_t)TIM7_BASE:
+        IRQn = TIM7_IRQn;
+        break;
+#endif
+#if defined(TIM8_BASE)
+
+      case (uint32_t)TIM8_BASE:
+        IRQn = TIM8_IRQn;
+        break;
+#endif
+#if defined(TIM9_BASE)
+
+      case (uint32_t)TIM9_BASE:
+        IRQn = TIM9_IRQn;
+        break;
+#endif
+#if defined(TIM10_BASE)
+
+      case (uint32_t)TIM10_BASE:
+        IRQn = TIM10_IRQn;
+        break;
+#endif
+#if defined(TIM11_BASE)
+
+      case (uint32_t)TIM11_BASE:
+        IRQn = TIM11_IRQn;
+        break;
+#endif
+#if defined(TIM12_BASE)
+
+      case (uint32_t)TIM12_BASE:
+        IRQn = TIM12_IRQn;
+        break;
+#endif
+#if defined(TIM13_BASE)
+
+      case (uint32_t)TIM13_BASE:
+        IRQn = TIM13_IRQn;
+        break;
+#endif
+#if defined(TIM14_BASE)
+
+      case (uint32_t)TIM14_BASE:
+        IRQn = TIM14_IRQn;
+        break;
+#endif
+#if defined(TIM15_BASE)
+
+      case (uint32_t)TIM15_BASE:
+        IRQn = TIM15_IRQn;
+        break;
+#endif
+#if defined(TIM16_BASE)
+
+      case (uint32_t)TIM16_BASE:
+        IRQn = TIM16_IRQn;
+        break;
+#endif
+#if defined(TIM17_BASE)
+
+      case (uint32_t)TIM17_BASE:
+        IRQn = TIM17_IRQn;
+        break;
+#endif
+#if defined(TIM18_BASE)
+
+      case (uint32_t)TIM18_BASE:
+        IRQn = TIM18_IRQn;
+        break;
+#endif
+#if defined(TIM19_BASE)
+
+      case (uint32_t)TIM19_BASE:
+        IRQn = TIM19_IRQn;
+        break;
+#endif
+#if defined(TIM20_BASE)
+
+      case (uint32_t)TIM20_BASE:
+        IRQn = TIM20_IRQn;
+        break;
+#endif
+#if defined(TIM21_BASE)
+
+      case (uint32_t)TIM21_BASE:
+        IRQn = TIM21_IRQn;
+        break;
+#endif
+#if defined(TIM22_BASE)
+
+      case (uint32_t)TIM22_BASE:
+        IRQn = TIM22_IRQn;
+        break;
+#endif
+
+      default:
+        //_Error_Handler("TIM: Unknown timer IRQn", (int)tim);
+        break;
+    }
+  }
+
+  return IRQn;
+}
+
+/**
+    @brief  This function return IRQ number corresponding to Capture or Compare interrupt event of timer instance.
+    @param  tim: timer instance
+    @retval IRQ number
+*/
+IRQn_Type getTimerCCIrq(TIM_TypeDef *tim)
+{
+  IRQn_Type IRQn = NonMaskableInt_IRQn;
+
+  if (tim != (TIM_TypeDef *)NC)
+  {
+    /* Get IRQn depending on TIM instance */
+    switch ((uint32_t)tim)
+    {
+#if defined(TIM1_BASE)
+
+      case (uint32_t)TIM1_BASE:
+        IRQn = TIM1_CC_IRQn;
+        break;
+#endif
+#if defined(TIM2_BASE)
+
+      case (uint32_t)TIM2_BASE:
+        IRQn = TIM2_IRQn;
+        break;
+#endif
+#if defined(TIM3_BASE)
+
+      case (uint32_t)TIM3_BASE:
+        IRQn = TIM3_IRQn;
+        break;
+#endif
+#if defined(TIM4_BASE)
+
+      case (uint32_t)TIM4_BASE:
+        IRQn = TIM4_IRQn;
+        break;
+#endif
+#if defined(TIM5_BASE)
+
+      case (uint32_t)TIM5_BASE:
+        IRQn = TIM5_IRQn;
+        break;
+#endif
+
+#if 0
+        // KH
+#if defined(TIM6_BASE)
+
+      case (uint32_t)TIM6_BASE:
+        IRQn = TIM6_IRQn;
+        break;
+#endif
+#endif
+        //////
+
+#if defined(TIM7_BASE)
+
+      case (uint32_t)TIM7_BASE:
+        IRQn = TIM7_IRQn;
+        break;
+#endif
+#if defined(TIM8_BASE)
+
+      case (uint32_t)TIM8_BASE:
+        IRQn = TIM8_CC_IRQn;
+        break;
+#endif
+#if defined(TIM9_BASE)
+
+      case (uint32_t)TIM9_BASE:
+        IRQn = TIM9_IRQn;
+        break;
+#endif
+#if defined(TIM10_BASE)
+
+      case (uint32_t)TIM10_BASE:
+        IRQn = TIM10_IRQn;
+        break;
+#endif
+#if defined(TIM11_BASE)
+
+      case (uint32_t)TIM11_BASE:
+        IRQn = TIM11_IRQn;
+        break;
+#endif
+#if defined(TIM12_BASE)
+
+      case (uint32_t)TIM12_BASE:
+        IRQn = TIM12_IRQn;
+        break;
+#endif
+#if defined(TIM13_BASE)
+
+      case (uint32_t)TIM13_BASE:
+        IRQn = TIM13_IRQn;
+        break;
+#endif
+#if defined(TIM14_BASE)
+
+      case (uint32_t)TIM14_BASE:
+        IRQn = TIM14_IRQn;
+        break;
+#endif
+#if defined(TIM15_BASE)
+
+      case (uint32_t)TIM15_BASE:
+        IRQn = TIM15_IRQn;
+        break;
+#endif
+#if defined(TIM16_BASE)
+
+      case (uint32_t)TIM16_BASE:
+        IRQn = TIM16_IRQn;
+        break;
+#endif
+#if defined(TIM17_BASE)
+
+      case (uint32_t)TIM17_BASE:
+        IRQn = TIM17_IRQn;
+        break;
+#endif
+#if defined(TIM18_BASE)
+
+      case (uint32_t)TIM18_BASE:
+        IRQn = TIM18_IRQn;
+        break;
+#endif
+#if defined(TIM19_BASE)
+
+      case (uint32_t)TIM19_BASE:
+        IRQn = TIM19_IRQn;
+        break;
+#endif
+#if defined(TIM20_BASE)
+
+      case (uint32_t)TIM20_BASE:
+        IRQn = TIM20_CC_IRQn;
+        break;
+#endif
+#if defined(TIM21_BASE)
+
+      case (uint32_t)TIM21_BASE:
+        IRQn = TIM21_IRQn;
+        break;
+#endif
+#if defined(TIM22_BASE)
+
+      case (uint32_t)TIM22_BASE:
+        IRQn = TIM22_IRQn;
+        break;
+#endif
+        break;
+
+      default:
+        //_Error_Handler("TIM: Unknown timer IRQn", (int)tim);
+        break;
+    }
+  }
+
+  return IRQn;
+}
+
+/**
+    @brief  This function return the timer clock source.
+    @param  tim: timer instance
+    @retval 1 = PCLK1 or 2 = PCLK2
+*/
+uint8_t getTimerClkSrc(TIM_TypeDef *tim)
+{
+  uint8_t clkSrc = 0;
+
+  if (tim != (TIM_TypeDef *)NC)
+#if defined(STM32F0xx) || defined(STM32G0xx)
+    /* TIMx source CLK is PCKL1 */
+    clkSrc = 1;
+
+#else
+  {
+    /* Get source clock depending on TIM instance */
+    switch ((uint32_t)tim)
+    {
+#if defined(TIM2_BASE)
+
+      case (uint32_t)TIM2:
+#endif
+#if defined(TIM3_BASE)
+      case (uint32_t)TIM3:
+#endif
+#if defined(TIM4_BASE)
+      case (uint32_t)TIM4:
+#endif
+#if defined(TIM5_BASE)
+      case (uint32_t)TIM5:
+#endif
+#if defined(TIM6_BASE)
+      case (uint32_t)TIM6:
+#endif
+#if defined(TIM7_BASE)
+      case (uint32_t)TIM7:
+#endif
+#if defined(TIM12_BASE)
+      case (uint32_t)TIM12:
+#endif
+#if defined(TIM13_BASE)
+      case (uint32_t)TIM13:
+#endif
+#if defined(TIM14_BASE)
+      case (uint32_t)TIM14:
+#endif
+#if defined(TIM18_BASE)
+      case (uint32_t)TIM18:
+#endif
+        clkSrc = 1;
+        break;
+#if defined(TIM1_BASE)
+
+      case (uint32_t)TIM1:
+#endif
+#if defined(TIM8_BASE)
+      case (uint32_t)TIM8:
+#endif
+#if defined(TIM9_BASE)
+      case (uint32_t)TIM9:
+#endif
+#if defined(TIM10_BASE)
+      case (uint32_t)TIM10:
+#endif
+#if defined(TIM11_BASE)
+      case (uint32_t)TIM11:
+#endif
+#if defined(TIM15_BASE)
+      case (uint32_t)TIM15:
+#endif
+#if defined(TIM16_BASE)
+      case (uint32_t)TIM16:
+#endif
+#if defined(TIM17_BASE)
+      case (uint32_t)TIM17:
+#endif
+#if defined(TIM19_BASE)
+      case (uint32_t)TIM19:
+#endif
+#if defined(TIM20_BASE)
+      case (uint32_t)TIM20:
+#endif
+#if defined(TIM21_BASE)
+      case (uint32_t)TIM21:
+#endif
+#if defined(TIM22_BASE)
+      case (uint32_t)TIM22:
+#endif
+        clkSrc = 2;
+        break;
+
+      default:
+        ////_Error_Handler("TIM: Unknown timer instance", (int)tim);
+        break;
+    }
+  }
+#endif
+  return clkSrc;
+}
+
+
+#endif /* HAL_TIM_MODULE_ENABLED && !HAL_TIM_MODULE_ONLY */
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Gigatimer.h

@@ -0,0 +1,198 @@
+/****************************************************************************************************************************
+  timer.h
+
+  For Portenta_H7 boards
+  Written by Khoi Hoang
+
+  Built by Khoi Hoang https://github.com/khoih-prog/Portenta_H7_TimerInterrupt
+  Licensed under MIT license
+
+  Now even you use all these new 16 ISR-based timers,with their maximum interval practically unlimited (limited only by
+  unsigned long miliseconds), you just consume only one Portenta_H7 STM32 timer and avoid conflicting with other cores' tasks.
+  The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
+  Therefore, their executions are not blocked by bad-behaving functions / tasks.
+  This important feature is absolutely necessary for mission-critical tasks.
+
+  Version: 1.4.0
+
+  Version Modified By   Date      Comments
+  ------- -----------  ---------- -----------
+  1.2.1   K.Hoang      15/09/2021 Initial coding for Portenta_H7
+  1.3.0   K.Hoang      17/09/2021 Add PWM features and examples
+  1.3.1   K.Hoang      21/09/2021 Fix warnings in PWM examples
+  1.4.0   K.Hoang      22/01/2022 Fix `multiple-definitions` linker error. Fix bug
+ *****************************************************************************************************************************/
+
+// Modified from stm32 core v2.0.0
+
+/*
+ *******************************************************************************
+   Copyright (c) 2019, STMicroelectronics
+   All rights reserved.
+
+   This software component is licensed by ST under BSD 3-Clause license,
+   the "License"; You may not use this file except in compliance with the
+   License. You may obtain a copy of the License at:
+                          opensource.org/licenses/BSD-3-Clause
+
+ *******************************************************************************
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __GIGATIMER_H
+#define __GIGATIMER_H
+#if defined(ARDUINO_GIGA)
+/* Includes ------------------------------------------------------------------*/
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(HAL_TIM_MODULE_ENABLED) && !defined(HAL_TIM_MODULE_ONLY)
+
+/* Exported constants --------------------------------------------------------*/
+#ifndef TIM_IRQ_PRIO
+#if (__CORTEX_M == 0x00U)
+#define TIM_IRQ_PRIO       3
+#else
+#define TIM_IRQ_PRIO       14
+#endif /* __CORTEX_M */
+
+#endif /* TIM_IRQ_PRIO */
+
+#ifndef TIM_IRQ_SUBPRIO
+#define TIM_IRQ_SUBPRIO    0
+#endif
+
+#if defined(TIM1_BASE) && !defined(TIM1_IRQn)
+#define TIM1_IRQn TIM1_UP_IRQn
+#define TIM1_IRQHandler TIM1_UP_IRQHandler
+#endif
+
+#if defined(TIM8_BASE) && !defined(TIM8_IRQn)
+#define TIM8_IRQn TIM8_UP_TIM13_IRQn
+#define TIM8_IRQHandler TIM8_UP_TIM13_IRQHandler
+#endif
+
+#if defined(TIM12_BASE) && !defined(TIM12_IRQn)
+#define TIM12_IRQn TIM8_BRK_TIM12_IRQn
+#define TIM12_IRQHandler TIM8_BRK_TIM12_IRQHandler
+#endif
+
+#if defined(TIM13_BASE) && !defined(TIM13_IRQn)
+#define TIM13_IRQn TIM8_UP_TIM13_IRQn
+#endif
+
+#if defined(TIM14_BASE) && !defined(TIM14_IRQn)
+#define TIM14_IRQn TIM8_TRG_COM_TIM14_IRQn
+#define TIM14_IRQHandler TIM8_TRG_COM_TIM14_IRQHandler
+#endif
+
+
+typedef enum
+{
+#if defined(TIM1_BASE)
+  TIMER1_INDEX,
+#endif
+#if defined(TIM2_BASE)
+  TIMER2_INDEX,
+#endif
+#if defined(TIM3_BASE)
+  TIMER3_INDEX,
+#endif
+#if defined(TIM4_BASE)
+  TIMER4_INDEX,
+#endif
+#if defined(TIM5_BASE)
+  TIMER5_INDEX,
+#endif
+#if defined(TIM6_BASE)
+  TIMER6_INDEX,
+#endif
+#if defined(TIM7_BASE)
+  TIMER7_INDEX,
+#endif
+#if defined(TIM8_BASE)
+  TIMER8_INDEX,
+#endif
+#if defined(TIM9_BASE)
+  TIMER9_INDEX,
+#endif
+#if defined(TIM10_BASE)
+  TIMER10_INDEX,
+#endif
+#if defined(TIM11_BASE)
+  TIMER11_INDEX,
+#endif
+#if defined(TIM12_BASE)
+  TIMER12_INDEX,
+#endif
+#if defined(TIM13_BASE)
+  TIMER13_INDEX,
+#endif
+#if defined(TIM14_BASE)
+  TIMER14_INDEX,
+#endif
+#if defined(TIM15_BASE)
+  TIMER15_INDEX,
+#endif
+#if defined(TIM16_BASE)
+  TIMER16_INDEX,
+#endif
+#if defined(TIM17_BASE)
+  TIMER17_INDEX,
+#endif
+#if defined(TIM18_BASE)
+  TIMER18_INDEX,
+#endif
+#if defined(TIM19_BASE)
+  TIMER19_INDEX,
+#endif
+#if defined(TIM20_BASE)
+  TIMER20_INDEX,
+#endif
+#if defined(TIM21_BASE)
+  TIMER21_INDEX,
+#endif
+#if defined(TIM22_BASE)
+  TIMER22_INDEX,
+#endif
+
+  TIMER_NUM,
+  UNKNOWN_TIMER = 0XFFFF
+} timer_index_t;
+
+
+// This structure is used to be able to get HardwareTimer instance (C++ class)
+// from handler (C structure) specially for interrupt management
+typedef struct
+{
+  // Those 2 first fields must remain in this order at the beginning of the structure
+  void    *__this;
+  TIM_HandleTypeDef handle;
+  uint32_t preemptPriority;
+  uint32_t subPriority;
+} timerObj_t;
+
+/* Exported functions ------------------------------------------------------- */
+timerObj_t *get_timer_obj(TIM_HandleTypeDef *htim);
+
+void enableTimerClock(TIM_HandleTypeDef *htim);
+void disableTimerClock(TIM_HandleTypeDef *htim);
+
+uint32_t getTimerIrq(TIM_TypeDef *tim);
+uint8_t getTimerClkSrc(TIM_TypeDef *tim);
+
+IRQn_Type getTimerUpIrq(TIM_TypeDef *tim);
+IRQn_Type getTimerCCIrq(TIM_TypeDef *tim);
+
+#endif /* HAL_TIM_MODULE_ENABLED && !HAL_TIM_MODULE_ONLY */
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+#endif /* __GIGATIMER_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

MotorDriver.cpp

@@ -5,6 +5,7 @@
  *  © 2020-2023 Harald Barth
  *  © 2020-2021 Chris Harlow
  *  © 2023 Colin Murdoch
+ *  © 2023 Travis Farmer
  *  All rights reserved.
  *  
  *  This file is part of CommandStation-EX
@@ -57,6 +58,7 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
   getFastPin(F("SIG"),signalPin,fastSignalPin);
   pinMode(signalPin, OUTPUT);
 
+  #ifndef ARDUINO_GIGA // no giga
   fastSignalPin.shadowinout = NULL;
   if (HAVE_PORTA(fastSignalPin.inout == &PORTA)) {
     DIAG(F("Found PORTA pin %d"),signalPin);
@@ -88,13 +90,14 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
     fastSignalPin.shadowinout = fastSignalPin.inout;
     fastSignalPin.inout = &shadowPORTF;
   }
-
+  #endif // giga
   signalPin2=signal_pin2;
   if (signalPin2!=UNUSED_PIN) {
     dualSignal=true;
     getFastPin(F("SIG2"),signalPin2,fastSignalPin2);
     pinMode(signalPin2, OUTPUT);
 
+    #ifndef ARDUINO_GIGA // no giga
     fastSignalPin2.shadowinout = NULL;
     if (HAVE_PORTA(fastSignalPin2.inout == &PORTA)) {
       DIAG(F("Found PORTA pin %d"),signalPin2);
@@ -126,6 +129,7 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
       fastSignalPin2.shadowinout = fastSignalPin2.inout;
       fastSignalPin2.inout = &shadowPORTF;
     }
+    #endif // giga
   }
   else dualSignal=false; 
   
@@ -501,8 +505,16 @@ unsigned int MotorDriver::mA2raw( unsigned int mA) {
   return (int32_t)mA * senseScale / senseFactorInternal;
 }
 
+
 void  MotorDriver::getFastPin(const FSH* type,int pin, bool input, FASTPIN & result) {
     // DIAG(F("MotorDriver %S Pin=%d,"),type,pin);
+#if defined(ARDUINO_GIGA) // yes giga
+    (void)type;
+    (void)input; // no warnings please
+
+    result = pin;
+  
+#else // no giga
     (void) type; // avoid compiler warning if diag not used above.
 #if defined(ARDUINO_ARCH_SAMD)
     PortGroup *port = digitalPinToPort(pin);
@@ -517,6 +529,7 @@ void  MotorDriver::getFastPin(const FSH* type,int pin, bool input, FASTPIN & res
       result.inout = portOutputRegister(port);
     result.maskHIGH = digitalPinToBitMask(pin);
     result.maskLOW = ~result.maskHIGH;
+#endif // giga
     // DIAG(F(" port=0x%x, inoutpin=0x%x, isinput=%d, mask=0x%x"),port, result.inout,input,result.maskHIGH);
 }
 

MotorDriver.h

@@ -4,6 +4,7 @@
  *  © 2021 Fred Decker
  *  © 2020 Chris Harlow
  *  © 2022 Harald Barth
+ *  © 2023 Travis Farmer
  *  All rights reserved.
  *  
  *  This file is part of CommandStation-EX
@@ -30,12 +31,21 @@
 // use powers of two so we can do logical and/or on the track modes in if clauses.
 enum TRACK_MODE : byte {TRACK_MODE_NONE = 1, TRACK_MODE_MAIN = 2, TRACK_MODE_PROG = 4,
                         TRACK_MODE_DC = 8, TRACK_MODE_DCX = 16, TRACK_MODE_EXT = 32};
+#if defined(ARDUINO_GIGA) // yes giga
 
+#define setHIGH(fastpin)  digitalWrite(fastpin,1)
+#define setLOW(fastpin) digitalWrite(fastpin,0)
+#else // no giga
 #define setHIGH(fastpin)  *fastpin.inout |= fastpin.maskHIGH
 #define setLOW(fastpin)   *fastpin.inout &= fastpin.maskLOW
+#endif // giga
+#if defined(ARDUINO_GIGA) // yes giga
+#define isHIGH(fastpin) ((PinStatus)digitalRead(fastpin)==1)
+#define isLOW(fastpin) ((PinStatus)digitalRead(fastpin)==0)
+#else // no giga
 #define isHIGH(fastpin)   (*fastpin.inout & fastpin.maskHIGH)
 #define isLOW(fastpin)    (!isHIGH(fastpin))
-
+#endif // giga
 #define TOKENPASTE(x, y) x ## y
 #define TOKENPASTE2(x, y) TOKENPASTE(x, y)
 
@@ -117,12 +127,19 @@ typedef uint32_t portreg_t;
 typedef uint8_t portreg_t;
 #endif
 
+#if defined(ARDUINO_GIGA) // yes giga
+typedef int FASTPIN;
+
+
+#else // no giga
 struct FASTPIN {
   volatile portreg_t *inout;
   portreg_t maskHIGH;
   portreg_t maskLOW;
   volatile portreg_t *shadowinout;
 };
+#endif // giga
+
 // The port registers that are shadowing
 // the real port registers. These are
 // defined in Motordriver.cpp
@@ -148,6 +165,12 @@ class MotorDriver {
     // otherwise the call from interrupt context can undo whatever we do
     // from outside interrupt
     void setBrake( bool on, bool interruptContext=false);
+    #if defined(ARDUINO_GIGA) // yes giga
+    __attribute__((always_inline)) inline void setSignal( bool high) {
+      digitalWrite(signalPin, high);
+      if (dualSignal) digitalWrite(signalPin2, !high);
+    };
+    #else // no giga
   __attribute__((always_inline)) inline void setSignal( bool high) {
       if (trackPWM) {
 	DCCTimer::setPWM(signalPin,high);
@@ -163,6 +186,7 @@ class MotorDriver {
 	}
       }
     };
+    #endif // giga
     inline void enableSignal(bool on) {
       if (on)
 	pinMode(signalPin, OUTPUT);
@@ -184,6 +208,12 @@ class MotorDriver {
     int  getCurrentRaw(bool fromISR=false);
     unsigned int raw2mA( int raw);
     unsigned int mA2raw( unsigned int mA);
+#if defined(ARDUINO_GIGA) // yes giga
+    inline bool digitalPinHasPWM(int pin) {
+      if (pin!=UNUSED_PIN && pin>=2 && pin<=13) return true;
+      else return false;
+    }
+#endif // giga
     inline bool brakeCanPWM() {
 #if defined(ARDUINO_ARCH_ESP32)
       return (brakePin != UNUSED_PIN); // This was just (true) but we probably do need to check for UNUSED_PIN!

WifiInterface.cpp

@@ -3,6 +3,7 @@
  *  © 2020-2022 Harald Barth
  *  © 2020-2022 Chris Harlow
  *  © 2023 Nathan Kellenicki
+ *  © 2023 Travis Farmer
  *  All rights reserved.
  *
  *  This file is part of CommandStation-EX
@@ -57,6 +58,14 @@ Stream * WifiInterface::wifiStream;
 #define SERIAL3 Serial3
 #endif
 
+#if defined(ARDUINO_GIGA) // yes giga
+#define NUM_SERIAL 5
+#define SERIAL1 Serial1
+#define SERIAL2 Serial2
+#define SERIAL3 Serial3
+#define SERIAL4 Serial4
+#endif // giga
+
 #if defined(ARDUINO_ARCH_STM32)
 // Handle serial ports availability on STM32 for variants!
 // #undef NUM_SERIAL

defines.h

@@ -5,6 +5,7 @@
  *  © 2021 Fred Decker
  *  © 2020-2022 Harald Barth
  *  © 2020-2021 Chris Harlow
+ *  © 2023 Travis Farmer
  *
  *  This file is part of CommandStation-EX
  *
@@ -147,7 +148,25 @@
   // #ifndef I2C_USE_WIRE
   // #define I2C_USE_WIRE
   // #endif
-
+#elif defined(ARDUINO_GIGA)
+  #define ARDUINO_TYPE "Giga"
+  #ifndef GIGA_EXT_EEPROM
+    #define DISABLE_EEPROM
+  #endif
+  //#if !defined(I2C_USE_WIRE)
+  //#define I2C_USE_WIRE
+  //#endif
+  #define SDA I2C_SDA
+  #define SCL I2C_SCL
+  #define DCC_EX_TIMER
+  // these don't work...
+  //extern const uint16_t PROGMEM port_to_input_PGM[];
+  //extern const uint16_t PROGMEM port_to_output_PGM[];
+  //extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
+  //#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
+  //#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
+  //#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
+  
 /* TODO when ready 
 #elif defined(ARDUINO_ARCH_RP2040)
   #define ARDUINO_TYPE "RP2040"