1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 05:11:24 +01:00

Merge pull request #389 from DCC-EX:add-startup-delay

Add-startup-delay
This commit is contained in:
peteGSX 2024-01-09 16:43:41 +10:00 committed by GitHub
commit c336ab0bb4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 16 additions and 1 deletions

View File

@ -76,6 +76,12 @@ void setup()
DIAG(F("License GPLv3 fsf.org (c) dcc-ex.com"));
// If user has defined a startup delay, delay here before starting IO
#if defined(STARTUP_DELAY)
DIAG(F("Delaying startup for %dms"), STARTUP_DELAY);
delay(STARTUP_DELAY);
#endif
// Initialise HAL layer before reading EEprom or setting up MotorDrivers
IODevice::begin();

View File

@ -222,6 +222,14 @@ The configuration file for DCC-EX Command Station
// We do not support to use the same address, for example 100(long) and 100(short)
// at the same time, there must be a border.
/////////////////////////////////////////////////////////////////////////////////////
// Some newer 32bit microcontrollers boot very quickly, so powering on I2C and other
// peripheral devices at the same time may result in the CommandStation booting too
// quickly to detect them.
// To work around this, uncomment the STARTUP_DELAY line below and set a value in
// milliseconds that works for your environment, default is 3000 (3 seconds).
// #define STARTUP_DELAY 3000
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE TURNOUTS/ACCESSORIES FOLLOW NORM RCN-213

View File

@ -3,7 +3,8 @@
#include "StringFormatter.h"
#define VERSION "5.2.20"
#define VERSION "5.2.21"
// 5.2.21 - Add STARTUP_DELAY config option to delay CS bootup
// 5.2.20 - Check return of Ethernet.begin()
// 5.2.19 - ESP32: Determine if the RMT hardware can handle DCC
// 5.2.18 - Display network IP fix