No functional change

Unused parameter removal & end of file tidying by the Arduino IDE

CommandDistributor.cpp

@@ -377,4 +377,3 @@ void CommandDistributor::setVirtualLCDSerial(Print * stream) {
 Print* CommandDistributor::virtualLCDSerial=&USB_SERIAL;
 byte CommandDistributor::virtualLCDClient=0xFF;
 byte CommandDistributor::rememberVLCDClient=0;
-

DCCACK.cpp

@@ -483,4 +483,3 @@ void DCCACK::checkAck(byte sentResetsSincePacket) {
     }      
     ackPulseStart=0;  // We have detected a too-short or too-long pulse so ignore and wait for next leading edge 
 }
-

DCCTimerAVR.cpp

@@ -197,6 +197,8 @@ void DCCTimer::DCCEXanalogWriteFrequency(uint8_t pin, uint32_t f) {
 }
 void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t fbits) {
 #if defined(ARDUINO_AVR_UNO)
+      (void)fbits;
+      (void) pin;
       // Not worth doin something here as:
       // If we are on pin 9 or 10 we are on Timer1 and we can not touch Timer1 as that is our DCC source.
       // If we are on pin 5 or 6 we are on Timer 0 ad we can not touch Timer0 as that is millis() etc.

DCCTimerESP.cpp

@@ -324,4 +324,3 @@ void ADCee::begin() {
 }
 
 #endif //ESP32
-

EXRAIL2Parser.cpp

@@ -363,4 +363,3 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
     return false;
   }
 }
-

IODevice.cpp

@@ -627,4 +627,3 @@ bool ArduinoPins::fastReadDigital(uint8_t pin) {
 #endif
   return result;
 }
-

IO_DCCAccessory.cpp

@@ -65,4 +65,3 @@ void DCCAccessoryDecoder::_display() {
   DIAG(F("DCCAccessoryDecoder Configured on Vpins:%u-%u Addresses %d/%d-%d/%d)"), _firstVpin, _firstVpin+_nPins-1,
       ADDRESS(_packedAddress), SUBADDRESS(_packedAddress), ADDRESS(endAddress), SUBADDRESS(endAddress));
 }
-

IO_EncoderThrottle.cpp

@@ -141,4 +141,3 @@ const byte _DIR_MASK = 0x30;
   void EncoderThrottle::_display() {
     DIAG(F("DRIVE vpin %d loco %d notch %d"),_firstVpin,_locoid,_notch);
   }
-

IO_NeoPixel.h

@@ -206,6 +206,7 @@ private:
   
  // loop called by HAL supervisor 
   void _loop(unsigned long currentMicros) override {
+    (void)currentMicros;
     if (!_showPendimg) return;
     byte showBuffer[]={SEESAW_NEOPIXEL_BASE,SEESAW_NEOPIXEL_SHOW};
     I2CManager.write(_I2CAddress,showBuffer,sizeof(showBuffer));
@@ -291,7 +292,7 @@ private:
   }
 
   
-  void transmit(uint16_t pixel, bool show=true) { 
+  void transmit(uint16_t pixel) { 
     byte buffer[]={SEESAW_NEOPIXEL_BASE,SEESAW_NEOPIXEL_BUF,0x00,0x00,0x00,0x00,0x00};
     uint16_t offset= pixel * _bytesPerPixel;
     buffer[2]=(byte)(offset>>8);

IO_Servo.cpp

@@ -30,4 +30,3 @@
 //
 const uint8_t FLASH Servo::_bounceProfile[30] = 
     {0,2,3,7,13,33,50,83,100,83,75,70,65,60,60,65,74,84,100,83,75,70,70,72,75,80,87,92,97,100};
-

IO_TM1638.cpp

@@ -213,5 +213,3 @@ void TM1638::test(){
   }
 
 }
-
-

StringBuffer.cpp

@@ -41,5 +41,3 @@ size_t StringBuffer::write(uint8_t b) {
   _buffer[_pos_write]='\0';
   return 1;
 }
-
-

TrackManager.cpp

@@ -697,4 +697,3 @@ TRACK_MODE TrackManager::getMode(byte t) {
 int16_t TrackManager::returnDCAddr(byte t) {
     return (trackDCAddr[t]);
 }
-

Turnouts.cpp

@@ -527,4 +527,3 @@
     StringFormatter::send(stream, F("<H %d LCN %d>\n"), _turnoutData.id, 
     !_turnoutData.closed); 
   }
-