dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-30 03:26:13 +01:00
Code Releases Activity

Add _writeAnalogue()

Browse Source
This commit is contained in:
peteGSX 2023-06-19 08:25:20 +10:00
parent 988011475c
commit c932325120
1 changed files with 26 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
IO_RotaryEncoder.h
View File

@ -1,4 +1,5 @@
/* /*
* © 2023, Peter Cole. All rights reserved.
* © 2022, Peter Cole. All rights reserved. * © 2022, Peter Cole. All rights reserved.
* *
* This file is part of EX-CommandStation * This file is part of EX-CommandStation
@ -28,9 +29,23 @@
* ONCHANGE(vpin) - flag when the rotary encoder position has changed from the previous position * ONCHANGE(vpin) - flag when the rotary encoder position has changed from the previous position
* IFRE(vpin, position) - test to see if specified rotary encoder position has been received * IFRE(vpin, position) - test to see if specified rotary encoder position has been received
* *
* Further to this, feedback can be sent to the rotary encoder by using 2 Vpins, and sending a SET()/RESET() to the second Vpin. * Feedback can also be sent to the rotary encoder by using 2 Vpins, and sending a SET()/RESET() to the second Vpin.
* A SET(vpin) will flag that a turntable (or anything else) is in motion, and a RESET(vpin) that the motion has finished. * A SET(vpin) will flag that a turntable (or anything else) is in motion, and a RESET(vpin) that the motion has finished.
* *
* In addition, defining a third Vpin will allow a position number to be sent so that when an EXRAIL automation or some other
* activity has moved a turntable, the position can be reflected in the rotary encoder software. This can be accomplished
* using the EXRAIL SERVO(vpin, position, profile) command, where:
* - vpin = the third defined Vpin (any other is ignored)
* - position = the defined position in the DCC-EX Rotary Encoder software, 0 (Home) to 255
* - profile = Must be defined as per the SERVO() command, but is ignored as it has no relevance
*
* Defining in myAutomation.h requires the device driver to be included in addition to the HAL() statement. Examples:
*
* #include "IO_RotaryEncoder.h"
* HAL(RotaryEncoder, 700, 1, 0x70) // Define single Vpin, no feedback or position sent to rotary encoder software
* HAL(RotaryEncoder, 700, 2, 0x70) // Define two Vpins, feedback only sent to rotary encoder software
* HAL(RotaryEncoder, 700, 3, 0x70) // Define three Vpins, can send feedback and position update to rotary encoder software
*
* Refer to the documentation for further information including the valid activities and examples. * Refer to the documentation for further information including the valid activities and examples.
*/ */
@ -104,6 +119,15 @@ private:
} }
} }
void _writeAnalogue(VPIN vpin, int position, uint8_t profile, uint16_t duration) override {
if (vpin == _firstVpin + 2) {
if (position >= 0 && position <= 255) {
byte _positionBuffer[2] = {RE_MOVE, position};
I2CManager.write(_I2CAddress, _positionBuffer, 2);
}
}
}
void _display() override { void _display() override {
DIAG(F("Rotary Encoder I2C:%s v%d.%d.%d Configured on VPIN:%u-%d %S"), _I2CAddress.toString(), _majorVer, _minorVer, _patchVer, DIAG(F("Rotary Encoder I2C:%s v%d.%d.%d Configured on VPIN:%u-%d %S"), _I2CAddress.toString(), _majorVer, _minorVer, _patchVer,
(int)_firstVpin, _firstVpin+_nPins-1, (_deviceState==DEVSTATE_FAILED) ? F("OFFLINE") : F("")); (int)_firstVpin, _firstVpin+_nPins-1, (_deviceState==DEVSTATE_FAILED) ? F("OFFLINE") : F(""));
@ -120,6 +144,7 @@ private:
enum { enum {
RE_VER = 0xA0, // Flag to retrieve rotary encoder version from the device RE_VER = 0xA0, // Flag to retrieve rotary encoder version from the device
RE_OP = 0xA1, // Flag for normal operation RE_OP = 0xA1, // Flag for normal operation
RE_MOVE = 0xA2, // Flag for sending a position update
}; };
}; };