dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 21:01:25 +01:00
Code Releases Activity

Update release_notes.md

Browse Source
This commit is contained in:
Fred 2021-03-16 09:05:10 -04:00 committed by GitHub
parent 086336158f
commit c9ade73376
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 24 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
release_notes.md
View File

@ -5,8 +5,29 @@ The DCC-EX Team is pleased to release CommandStation-EX-v3.0.0 as a Production R
- **Wi-Fi** - works, but can be challenging to use if you want to switch between AP mode and STA station mode.
- **Pololu Motor Shield** - is supported with this release, but the user may have to play around with some timings to enable programming mode due to limitation in its current sensing circuitry
**Summar of the key new features added to CommandStation-EX V3.0.4**
**Summary of the key new features added to CommandStation-EX V3.0.7**
- **Support for 28 Speed steps** - Option to turn on 28 step speed decoders in addition to 128. If set, all locos will use 28 steps.
- **Improved overload messages with raw values (relative to offset)**
**Summary of the key new features added to CommandStation-EX V3.0.6**
- **Prevent compiler warning about deprecated B constants**
- **Fix Bug that did not let us transmit 5 byte sized packets** - 5 Byte commands like PoM (programming on main) were not being sent correctly
- **Huge function numbers (DCC BinaryStateControl)** - Support Functions beyond F28
- **<!> ESTOP all** - New command to emergency stop all locos on the main track
- **<- [cab]> estop and forget cab/all cabs** - Stop and remove loco from the CS. Stops the repeating throttle messages
- **<D RESET> command to reboot arduino**
- **Automatic sensor offset detect** -
- **Improved startup msgs from Motor Drivers (accuracy and auto sense factors)** -
- **Drop post-write verify** - No need to double check CV writes. Writes are now even faster.
- **Allow current sene pin set to UNUSED_PIN** - No need to ground an unused analog current pin. Produce startup warning and callback -2 for prog track cmds.
**Summary of the key new features added to CommandStation-EX V3.0.5**
- **Fix Fn Key startup with loco ID and fix state change for F16-28**
**Summary of the key new features added to CommandStation-EX V3.0.4**
- **"Drive-Away" Feature added so that throttles like Engine Driver can allow a loco to be programmed on a usable, electrically isolated programming track and then drive off onto the main track.
- **WiFi Startup Fixes**
**Summary of the key new features added to CommandStation-EX V3.0.3**
- **<W addr> command to write loco address and clear consist**
@ -54,6 +75,7 @@ The DCC-EX Team is pleased to release CommandStation-EX-v3.0.0 as a Production R
**CommandStation-EX Developers**
- Chris Harlow - Bournemouth, UK (UKBloke)
- Harald Barth - Stockholm, Sweden (Haba)
- Neil McKechnie - Worcestershire, UK (NeilMck)
- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
- Dave Cutting - Logan, Utah, USA (Dave Cutting/ David Cutting)
- M Steve Todd - - Engine Driver and JMRI Interface
@ -74,7 +96,7 @@ The DCC-EX Team is pleased to release CommandStation-EX-v3.0.0 as a Production R
**WebThrotle-EX**
- Fred Decker - Holly Springs, NC (FlightRisk/FrightRisk)
- Mani Kumar - Bangalor, India (Mani /Mani Kumar)
- Matt H -
- Matt H - Somewhere in Europe