Merge ESP32-fixes into DCCTimerESP

DCCTimer.h

@@ -1,7 +1,7 @@
 /*
- *  © 2022 Paul M. Antoine
+ *  © 2022-2023 Paul M. Antoine
  *  © 2021 Mike S
- *  © 2021-2022 Harald Barth
+ *  © 2021-2023 Harald Barth
  *  © 2021 Fred Decker
  *  All rights reserved.
  *  
@@ -62,6 +62,9 @@ class DCCTimer {
   static bool isPWMPin(byte pin);
   static void setPWM(byte pin, bool high);
   static void clearPWM();
+  static void DCCEXanalogWriteFrequency(uint8_t pin, uint32_t frequency);
+  static void DCCEXanalogWrite(uint8_t pin, int value);
+
 // Update low ram level.  Allow for extra bytes to be specified
 // by estimation or inspection, that may be used by other 
 // called subroutines.  Must be called with interrupts disabled.

DCCTimerESP.cpp

@@ -150,6 +150,45 @@ int DCCTimer::freeMemory() {
 void DCCTimer::reset() {
    ESP.restart();
 }
+
+#include "esp32-hal.h"
+#include "soc/soc_caps.h"
+
+
+#ifdef SOC_LEDC_SUPPORT_HS_MODE
+#define LEDC_CHANNELS           (SOC_LEDC_CHANNEL_NUM<<1)
+#else
+#define LEDC_CHANNELS           (SOC_LEDC_CHANNEL_NUM)
+#endif
+
+static int8_t pin_to_channel[SOC_GPIO_PIN_COUNT] = { 0 };
+static int cnt_channel = LEDC_CHANNELS;
+
+void DCCTimer::DCCEXanalogWriteFrequency(uint8_t pin, uint32_t frequency) {
+  if (pin < SOC_GPIO_PIN_COUNT) {
+    if (pin_to_channel[pin] != 0) {
+      ledcSetup(pin_to_channel[pin], frequency, 8);
+    }
+  }
+}
+
+void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value) {
+  if (pin < SOC_GPIO_PIN_COUNT) {
+    if (pin_to_channel[pin] == 0) {
+      if (!cnt_channel) {
+          log_e("No more PWM channels available! All %u already used", LEDC_CHANNELS);
+          return;
+      }
+      pin_to_channel[pin] = --cnt_channel;
+      ledcAttachPin(pin, cnt_channel);
+      ledcSetup(cnt_channel, 1000, 8);
+    } else {
+      ledcAttachPin(pin, pin_to_channel[pin]);
+    }
+    ledcWrite(pin_to_channel[pin], value);
+  }
+}
+
 int ADCee::init(uint8_t pin) {
   pinMode(pin, ANALOG);
   adc1_config_width(ADC_WIDTH_BIT_12);

ESP32-fixes.cpp

@@ -1,61 +0,0 @@
-/*
- *  © 2022 Harald Barth
- *  All rights reserved.
- *  
- *  This file is part of CommandStation-EX
- *
- *  This is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  It is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
- */
-#ifdef ARDUINO_ARCH_ESP32
-#include <Arduino.h>
-#include "ESP32-fixes.h"
-
-#include "esp32-hal.h"
-#include "soc/soc_caps.h"
-
-
-#ifdef SOC_LEDC_SUPPORT_HS_MODE
-#define LEDC_CHANNELS           (SOC_LEDC_CHANNEL_NUM<<1)
-#else
-#define LEDC_CHANNELS           (SOC_LEDC_CHANNEL_NUM)
-#endif
-
-static int8_t pin_to_channel[SOC_GPIO_PIN_COUNT] = { 0 };
-static int cnt_channel = LEDC_CHANNELS;
-
-void DCCEXanalogWriteFrequency(uint8_t pin, uint32_t frequency) {
-  if (pin < SOC_GPIO_PIN_COUNT) {
-    if (pin_to_channel[pin] != 0) {
-      ledcSetup(pin_to_channel[pin], frequency, 8);
-    }
-  }
-}
-
-void DCCEXanalogWrite(uint8_t pin, int value) {
-  if (pin < SOC_GPIO_PIN_COUNT) {
-    if (pin_to_channel[pin] == 0) {
-      if (!cnt_channel) {
-          log_e("No more PWM channels available! All %u already used", LEDC_CHANNELS);
-          return;
-      }
-      pin_to_channel[pin] = --cnt_channel;
-      ledcAttachPin(pin, cnt_channel);
-      ledcSetup(cnt_channel, 1000, 8);
-    } else {
-      ledcAttachPin(pin, pin_to_channel[pin]);
-    }
-    ledcWrite(pin_to_channel[pin], value);
-  }
-}
-#endif

ESP32-fixes.h

@@ -1,26 +0,0 @@
-/*
- *  © 2022 Harald Barth
- *  All rights reserved.
- *  
- *  This file is part of CommandStation-EX
- *
- *  This is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  It is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
- */
-#ifdef ARDUINO_ARCH_ESP32
-#pragma once
-#include <Arduino.h>
-void DCCEXanalogWriteFrequency(uint8_t pin, uint32_t frequency);
-void DCCEXanalogWrite(uint8_t pin, int value);
-#endif
-

MotorDriver.cpp

@@ -1,8 +1,8 @@
 /*
- *  © 2022 Paul M Antoine
+ *  © 2022-2023 Paul M Antoine
  *  © 2021 Mike S
  *  © 2021 Fred Decker
- *  © 2020-2022 Harald Barth
+ *  © 2020-2023 Harald Barth
  *  © 2020-2021 Chris Harlow
  *  All rights reserved.
  *  
@@ -27,10 +27,6 @@
 #include "DCCTimer.h"
 #include "DIAG.h"
 
-#if defined(ARDUINO_ARCH_ESP32)
-#include "ESP32-fixes.h"
-#endif
-
 bool MotorDriver::commonFaultPin=false;
 
 volatile portreg_t shadowPORTA;
@@ -286,7 +282,7 @@ void MotorDriver::setDCSignal(byte speedcode) {
 	f = taurustones[ (tSpeed-2)/2 ] ;
       }
     }
-    DCCEXanalogWriteFrequency(brakePin, f); // set DC PWM frequency to 100Hz XXX May move to setup
+    DCCTimer::DCCEXanalogWriteFrequency(brakePin, f); // set DC PWM frequency to 100Hz XXX May move to setup
   }
 #endif
   if (tSpeed <= 1) brake = 255;
@@ -295,7 +291,7 @@ void MotorDriver::setDCSignal(byte speedcode) {
   if (invertBrake)
     brake=255-brake;
 #if defined(ARDUINO_ARCH_ESP32)
-  DCCEXanalogWrite(brakePin,brake);
+  DCCTimer::DCCEXanalogWrite(brakePin,brake);
 #else
   analogWrite(brakePin,brake);
 #endif