dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 12:51:24 +01:00
Code Releases Activity

Update release_notes.md

Browse Source
This commit is contained in:
Fred 2022-10-22 18:10:42 -04:00 committed by GitHub
parent b7a010f904
commit daf6799ac1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 12 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
release_notes.md
View File

@ -14,11 +14,18 @@ The team continues improving the architecture of DCC++EX to make it more flexibl
- ACK defaults are now set to LIMIT 50mA, MIN 2000uS, MAX 2000uS for more compatibility with non NMRA compliant decoders
- Automatically detect and run a myFilter add-on (no need to call setFilter)
- New Commands for the Arduino IDE Serial Monitor and JMRI DCC++ Traffic Monitor
- </RED signal_id> </AMBER signal_id> </GREEN signal_id> commands
- </KILL ALL> and KILLALL command to stop all tasks
- <t cab> command to obtain current throttle settings
- New Commands for the Arduino IDE Serial Monitor and JMRI DCC++ Traffic Monitor
- </RED signal_id> to turn a individual LED Signal On & Off
- </AMBER signal_id> "
- </GREEN signal_id> "
- </KILL ALL> command to stop all tasks, and Diagnostic messages when KILL is used
- < t cab> command to obtain current throttle setting
- Allow WRITE CV on PROG <W CV VALUE>
- Updated CV read command <R cv>. Equivalent to <V cv 0>. Uses the verify callback.
- Allow WRITE CV on PROG <W CV VALUE)
- Change callback parameters are now optional on PROG
- New JA, JR, JT commands availabe for Throttle Developers to obtain Route, Roster and Turnout descriptions for communications
- New EX-RAIL Functions to use in Automation(n), ROUTE(N) & SEQUENCE(N) Scripts
@ -26,6 +33,7 @@ The team continues improving the architecture of DCC++EX to make it more flexibl
- FADE command now works for LEDs connected on PCA9685 Servo/Signal board Output vpins
- FORGET Forgets the current loco in DCC reminder tables saving memory and wasted packets sent to the track
- "IF" signal detection with IFRED(signal_id), IFAMBER(signal_id), IFGREEN(signal_id)
- KILLALL command to stop all tasks, and Diagnostic messages when KILL is used
- PARSE <> commands in EXRAIL allows sending of DCC-EX commands from EX-RAIL
- SERVO_SIGNAL Servo signals assigned to a specific servo turnout
- SIGNALH High-On signal pins (Arduino normally handles active LOW signals. This allows for active HIGH)