Added ONOVERLOAD

Added code changes to create ONOVERLOAD command in EXRAIL

EXRAIL2.cpp

@@ -2,7 +2,7 @@
  *  © 2021 Neil McKechnie
  *  © 2021-2023 Harald Barth
  *  © 2020-2023 Chris Harlow
- *  © 2022 Colin Murdoch
+ *  © 2022-2023 Colin Murdoch
  *  All rights reserved.
  *  
  *  This file is part of CommandStation-EX
@@ -94,6 +94,7 @@ LookList *  RMFT2::onAmberLookup=NULL;
 LookList *  RMFT2::onGreenLookup=NULL;
 LookList *  RMFT2::onChangeLookup=NULL;
 LookList *  RMFT2::onClockLookup=NULL;
+LookList *  RMFT2::onOverloadLookup=NULL;
 
 #define GET_OPCODE GETHIGHFLASH(RMFT2::RouteCode,progCounter)
 #define SKIPOP progCounter+=3
@@ -175,6 +176,7 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
   onGreenLookup=LookListLoader(OPCODE_ONGREEN);
   onChangeLookup=LookListLoader(OPCODE_ONCHANGE);
   onClockLookup=LookListLoader(OPCODE_ONTIME);
+  onOverloadLookup=LookListLoader(OPCODE_ONOVERLOAD);
 
 
   // Second pass startup, define any turnouts or servos, set signals red
@@ -986,6 +988,7 @@ void RMFT2::loop2() {
   case OPCODE_ONGREEN:
   case OPCODE_ONCHANGE:
   case OPCODE_ONTIME:
+  case OPCODE_ONOVERLOAD:
   
     break;
     
@@ -1140,6 +1143,16 @@ void RMFT2::clockEvent(int16_t clocktime, bool change) {
   }
 } 
 
+void RMFT2::powerEvent(char track, bool overload) {
+  // Hunt for an ONOVERLOAD for this item
+  if (Diag::CMD)
+   DIAG(F("Looking for Power event on track : %c"), track);
+  if (overload) {
+    handleEvent(F("POWER"),onOverloadLookup,track);
+  }
+}
+
+
 void RMFT2::handleEvent(const FSH* reason,LookList* handlers, int16_t id) {
   int pc= handlers->find(id);
   if (pc<0) return;

EXRAIL2.h

@@ -1,7 +1,7 @@
 /*
  *  © 2021 Neil McKechnie
  *  © 2020-2022 Chris Harlow
- *  © 2022 Colin Murdoch
+ *  © 2022-2023 Colin Murdoch
  *  © 2023 Harald Barth
  *  All rights reserved.
  *  
@@ -188,6 +188,7 @@ private:
    static LookList * onGreenLookup;
    static LookList * onChangeLookup;
    static LookList * onClockLookup;
+   static LookList * onOverloadLookup;
     
   // Local variables - exist for each instance/task 
     RMFT2 *next;   // loop chain 

EXRAIL2MacroReset.h

@@ -1,6 +1,6 @@
 /*
  *  © 2020-2022 Chris Harlow. All rights reserved.
- *  © 2022 Colin Murdoch
+ *  © 2022-2023 Colin Murdoch
  *  © 2023 Harald Barth
  *  
  *  This file is part of CommandStation-EX
@@ -93,6 +93,7 @@
 #undef ONTIME
 #undef ONCLOCKTIME
 #undef ONCLOCKMINS
+#undef ONOVERLOAD
 #undef ONGREEN
 #undef ONRED
 #undef ONTHROW 
@@ -215,6 +216,7 @@
 #define ONTIME(value)
 #define ONCLOCKTIME(hours,mins)
 #define ONCLOCKMINS(mins)
+#define ONOVERLOAD(track_id)
 #define ONDEACTIVATE(addr,subaddr)
 #define ONDEACTIVATEL(linear) 
 #define ONCLOSE(turnout_id)

EXRAILMacros.h

@@ -1,7 +1,7 @@
 /*
  *  © 2021 Neil McKechnie
  *  © 2020-2022 Chris Harlow
- *  © 2022 Colin Murdoch
+ *  © 2022-2023 Colin Murdoch
  *  © 2023 Harald Barth
  *  All rights reserved.
  *  
@@ -320,6 +320,7 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define ONTIME(value) OPCODE_ONTIME,V(value),  
 #define ONCLOCKTIME(hours,mins) OPCODE_ONTIME,V((STRIP_ZERO(hours)*60)+STRIP_ZERO(mins)),
 #define ONCLOCKMINS(mins) ONCLOCKTIME(25,mins)
+#define ONOVERLOAD(track_id) OPCODE_ONOVERLOAD,V(TRACK_NUMBER_##track_id),
 #define ONDEACTIVATE(addr,subaddr) OPCODE_ONDEACTIVATE,V(addr<<2|subaddr),
 #define ONDEACTIVATEL(linear) OPCODE_ONDEACTIVATE,V(linear+3),
 #define ONGREEN(signal_id) OPCODE_ONGREEN,V(signal_id),

MotorDriver.cpp

@@ -4,6 +4,7 @@
  *  © 2021 Fred Decker
  *  © 2020-2023 Harald Barth
  *  © 2020-2021 Chris Harlow
+ *  © 2023 Colin Murdoch
  *  All rights reserved.
  *  
  *  This file is part of CommandStation-EX
@@ -574,6 +575,8 @@ void MotorDriver::checkPowerOverload(bool useProgLimit, byte trackno) {
       DIAG(F("TRACK %c FAULT PIN detected after %4M. Pause %4M)"), trackno + 'A', mslpc, power_sample_overload_wait);
       throttleInrush(false);
       setPower(POWERMODE::OVERLOAD);
+      DIAG(F("Calling EXRAIL"));
+      RMFT2::powerEvent(trackno, true); // Tell EXRAIL we have an overload
       break;
     }
     if (checkCurrent(useProgLimit)) {
@@ -591,6 +594,8 @@ void MotorDriver::checkPowerOverload(bool useProgLimit, byte trackno) {
 	   trackno + 'A', mA, maxmA, mslpc, power_sample_overload_wait);
       throttleInrush(false);
       setPower(POWERMODE::OVERLOAD);
+      DIAG(F("Calling EXRAIL"));
+      RMFT2::powerEvent(trackno, true); // Tell EXRAIL we have an overload
       break;
     }
     // all well