New working rotary encoder branch

EXRAIL2.cpp

@@ -91,6 +91,7 @@ LookList *  RMFT2::onDeactivateLookup=NULL;
 LookList *  RMFT2::onRedLookup=NULL;
 LookList *  RMFT2::onAmberLookup=NULL;
 LookList *  RMFT2::onGreenLookup=NULL;
+LookList *  RMFT2::onChangeLookup=NULL;
 
 #define GET_OPCODE GETHIGHFLASH(RMFT2::RouteCode,progCounter)
 #define SKIPOP progCounter+=3
@@ -173,6 +174,7 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
   onRedLookup=LookListLoader(OPCODE_ONRED);
   onAmberLookup=LookListLoader(OPCODE_ONAMBER);
   onGreenLookup=LookListLoader(OPCODE_ONGREEN);
+  onChangeLookup=LookListLoader(OPCODE_ONCHANGE);
 
   // Second pass startup, define any turnouts or servos, set signals red
   // add sequences onRoutines to the lookups
@@ -745,6 +747,10 @@ void RMFT2::loop2() {
   case OPCODE_IFNOT: // do next operand if sensor not set
     skipIf=readSensor(operand);
     break;
+
+  case OPCODE_IFRE: // do next operand if rotary encoder != position
+    skipIf=IODevice::readAnalogue(operand)!=(int)(getOperand(1));
+    break;
     
   case OPCODE_IFRANDOM: // do block on random percentage
     skipIf=(uint8_t)micros() >= operand * 255/100;
@@ -968,6 +974,7 @@ void RMFT2::loop2() {
   case OPCODE_ONRED:
   case OPCODE_ONAMBER:
   case OPCODE_ONGREEN:
+  case OPCODE_ONCHANGE:
   
     break;
     
@@ -1094,6 +1101,11 @@ void RMFT2::activateEvent(int16_t addr, bool activate) {
   if (activate)  handleEvent(F("ACTIVATE"),onActivateLookup,addr);
   else handleEvent(F("DEACTIVATE"),onDeactivateLookup,addr);
 }
+
+void RMFT2::changeEvent(int16_t vpin, bool change) {
+  // Hunt for an ONCHANGE for this sensor
+  if (change)  handleEvent(F("CHANGE"),onChangeLookup,vpin);
+}
  
 void RMFT2::handleEvent(const FSH* reason,LookList* handlers, int16_t id) {
   int pc= handlers->find(id);

EXRAIL2.h

@@ -54,6 +54,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
              OPCODE_ENDTASK,OPCODE_ENDEXRAIL,
              OPCODE_SET_TRACK,
              OPCODE_ONRED,OPCODE_ONAMBER,OPCODE_ONGREEN,
+             OPCODE_ONCHANGE,
 
              // OPcodes below this point are skip-nesting IF operations
              // placed here so that they may be skipped as a group
@@ -64,7 +65,8 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
              OPCODE_IFTIMEOUT,
              OPCODE_IF,OPCODE_IFNOT,
              OPCODE_IFRANDOM,OPCODE_IFRESERVE,
-             OPCODE_IFCLOSED,OPCODE_IFTHROWN
+             OPCODE_IFCLOSED,OPCODE_IFTHROWN,
+             OPCODE_IFRE,
              };
 
 enum thrunger: byte {
@@ -113,6 +115,7 @@ class LookList {
     static void createNewTask(int route, uint16_t cab);
     static void turnoutEvent(int16_t id, bool closed);  
     static void activateEvent(int16_t addr, bool active);
+    static void changeEvent(int16_t id, bool change);
     static const int16_t SERVO_SIGNAL_FLAG=0x4000;
     static const int16_t ACTIVE_HIGH_SIGNAL_FLAG=0x2000;
     static const int16_t DCC_SIGNAL_FLAG=0x1000;
@@ -169,6 +172,7 @@ private:
    static LookList * onRedLookup;
    static LookList * onAmberLookup;
    static LookList * onGreenLookup;
+   static LookList * onChangeLookup;
     
   // Local variables - exist for each instance/task 
     RMFT2 *next;   // loop chain 

EXRAIL2MacroReset.h

@@ -72,6 +72,7 @@
 #undef IFRESERVE
 #undef IFTHROWN
 #undef IFTIMEOUT
+#undef IFRE
 #undef INVERT_DIRECTION 
 #undef JOIN 
 #undef KILLALL
@@ -88,6 +89,7 @@
 #undef ONGREEN
 #undef ONRED
 #undef ONTHROW 
+#undef ONCHANGE
 #undef PARSE
 #undef PAUSE
 #undef PIN_TURNOUT 
@@ -185,6 +187,7 @@
 #define IFTHROWN(turnout_id) 
 #define IFRESERVE(block)
 #define IFTIMEOUT
+#define IFRE(sensor_id,value)
 #define INVERT_DIRECTION 
 #define JOIN 
 #define KILLALL
@@ -201,6 +204,7 @@
 #define ONGREEN(signal_id) 
 #define ONRED(signal_id) 
 #define ONTHROW(turnout_id) 
+#define ONCHANGE(sensor_id)
 #define PAUSE
 #define PIN_TURNOUT(id,pin,description...) 
 #define PRINT(msg) 

EXRAILMacros.h

@@ -285,6 +285,7 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define IFRESERVE(block) OPCODE_IFRESERVE,V(block),
 #define IFTHROWN(turnout_id) OPCODE_IFTHROWN,V(turnout_id),
 #define IFTIMEOUT OPCODE_IFTIMEOUT,0,0,
+#define IFRE(sensor_id,value) OPCODE_IFRE,V(sensor_id),OPCODE_PAD,V(value),
 #define INVERT_DIRECTION OPCODE_INVERT_DIRECTION,0,0,
 #define JOIN OPCODE_JOIN,0,0,
 #define KILLALL OPCODE_KILLALL,0,0,
@@ -301,6 +302,7 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define ONGREEN(signal_id) OPCODE_ONGREEN,V(signal_id),
 #define ONRED(signal_id) OPCODE_ONRED,V(signal_id),
 #define ONTHROW(turnout_id) OPCODE_ONTHROW,V(turnout_id),
+#define ONCHANGE(sensor_id) OPCODE_ONCHANGE,V(sensor_id),
 #define PAUSE OPCODE_PAUSE,0,0,
 #define PIN_TURNOUT(id,pin,description...) OPCODE_PINTURNOUT,V(id),OPCODE_PAD,V(pin), 
 #define POM(cv,value) OPCODE_POM,V(cv),OPCODE_PAD,V(value),

IO_RotaryEncoder.h

@@ -0,0 +1,127 @@
+/*
+ *  © 2022, Peter Cole. All rights reserved.
+ *
+ *  This file is part of EX-CommandStation
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+/*
+* The IO_RotaryEncoder device driver is used to receive positions from a rotary encoder connected to an Arduino via I2C.
+*
+* There is separate code required for the Arduino the rotary encoder is connected to, which is located here:
+* https://github.com/peteGSX-Projects/dcc-ex-rotary-encoder
+*
+* This device driver receives the rotary encoder position when the rotary encoder button is pushed, and these positions
+* can be tested in EX-RAIL with:
+* ONCHANGE(vpin) - flag when the rotary encoder position has changed from the previous position
+* IFRE(vpin, position) - test to see if specified rotary encoder position has been received
+*
+* Further to this, feedback can be sent to the rotary encoder by using 2 Vpins, and sending a SET()/RESET() to the second Vpin.
+* A SET(vpin) will flag that a turntable (or anything else) is in motion, and a RESET(vpin) that the motion has finished.
+*
+* Refer to the documentation for further information including the valid activities and examples.
+*/
+
+#ifndef IO_ROTARYENCODER_H
+#define IO_ROTARYENCODER_H
+
+#include "EXRAIL2.h"
+#include "IODevice.h"
+#include "I2CManager.h"
+#include "DIAG.h"
+
+class RotaryEncoder : public IODevice {
+public:
+  // Constructor
+  RotaryEncoder(VPIN firstVpin, int nPins, uint8_t I2CAddress){
+    _firstVpin = firstVpin;
+    _nPins = nPins;
+    _I2CAddress = I2CAddress;
+    addDevice(this);
+  }
+  static void create(VPIN firstVpin, int nPins, uint8_t I2CAddress) {
+    if (checkNoOverlap(firstVpin, nPins, I2CAddress)) new RotaryEncoder(firstVpin, nPins, I2CAddress);
+  }
+
+private:
+  // Initiate the device
+  void _begin() {
+    I2CManager.begin();
+    if (I2CManager.exists(_I2CAddress)) {
+      byte _getVersion[1] = {RE_VER};
+      I2CManager.read(_I2CAddress, _versionBuffer, 3, _getVersion, 1);
+      _majorVer = _versionBuffer[0];
+      _minorVer = _versionBuffer[1];
+      _patchVer = _versionBuffer[2];
+      _buffer[0] = RE_OP;
+      I2CManager.write(_I2CAddress, _buffer, 1);
+#ifdef DIAG_IO
+      _display();
+#endif
+    } else {
+        _deviceState = DEVSTATE_FAILED;
+    }
+  }
+
+  void _loop(unsigned long currentMicros) override {
+    I2CManager.read(_I2CAddress, _buffer, 1);
+    _position = _buffer[0];
+    // This here needs to have a change check, ie. position is a different value.
+  #if defined(EXRAIL_ACTIVE)
+      if (_position != _previousPosition) {
+        _previousPosition = _position;
+        RMFT2::changeEvent(_firstVpin,1);
+      } else {
+        RMFT2::changeEvent(_firstVpin,0);
+      }
+  #endif
+    delayUntil(currentMicros + 100000);
+  }
+
+  // Device specific read function
+  int _readAnalogue(VPIN vpin) override {
+    if (_deviceState == DEVSTATE_FAILED) return 0;
+    return _position;
+  }
+
+  void _write(VPIN vpin, int value) override {
+    if (vpin == _firstVpin + 1) {
+      byte _feedbackBuffer[2] = {RE_OP, value};
+      I2CManager.write(_I2CAddress, _feedbackBuffer, 2);
+    }
+  }
+  
+  void _display() override {
+    DIAG(F("Rotary Encoder I2C:x%x v%d.%d.%d Configured on Vpin:%d-%d %S"), _I2CAddress, _majorVer, _minorVer, _patchVer,
+      (int)_firstVpin, _firstVpin+_nPins-1, (_deviceState==DEVSTATE_FAILED) ? F("OFFLINE") : F(""));
+  }
+
+  uint8_t _I2CAddress;
+  int8_t _position;
+  int8_t _previousPosition = 0;
+  uint8_t _versionBuffer[3];
+  uint8_t _buffer[1];
+  uint8_t _majorVer = 0;
+  uint8_t _minorVer = 0;
+  uint8_t _patchVer = 0;
+
+  enum {
+    RE_VER = 0xA0,   // Flag to retrieve rotary encoder version from the device
+    RE_OP = 0xA1,    // Flag for normal operation
+  };
+
+};
+
+#endif

myHal.cpp_example.txt

@@ -194,6 +194,19 @@ void halSetup() {
   //EXIOExpander::create(820, 16, 0x66, 16, 0);
 
 
+  //=======================================================================
+  // The following directive defines a rotary encoder instance.
+  //=======================================================================
+  // The parameters are: 
+  //   firstVpin = First available Vpin to allocate
+  //   numPins= Number of Vpins to allocate, can be either 1 or 2
+  //   i2cAddress = Available I2C address (default 0x70)
+
+  //RotaryEncoder::create(firstVpin, numPins, i2cAddress);
+  //RotaryEncoder::create(700, 1, 0x70);
+  //RotaryEncoder::create(701, 2, 0x71);
+
+
 }
 
 #endif