dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 21:21:24 +01:00
Code Releases Activity

Merge pull request #14 from DCC-EX/master

Browse Source 
merge upstream changes
This commit is contained in:
mstevetodd 2020-12-28 19:48:47 -05:00 committed by GitHub
commit f134d87c85
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 27 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
DCCWaveform.cpp
View File

@ -188,13 +188,17 @@ bool DCCWaveform::interrupt1() {
setSignal(LOW);
state = 0;
}
else state = 2;
else {
setSignal(HIGH); // jitter prevention
state = 2;
}
break;
case 2: // 116us after case 0
setSignal(LOW);
state = 3;
break;
case 3: // finished sending zero bit
setSignal(LOW); // jitter prevention
state = 0;
break;
}

4
EthernetInterface.cpp
View File

@ -50,11 +50,15 @@ EthernetInterface::EthernetInterface()
DIAG(F("\n+++++ Ethernet Setup "));
connected=false;
#ifdef IP_ADDRESS
Ethernet.begin(mac, IP_ADDRESS);
#else
if (Ethernet.begin(mac) == 0)
{
DIAG(F("begin FAILED\n"));
return;
}
#endif
DIAG(F("begin OK."));
if (Ethernet.hardwareStatus() == EthernetNoHardware) {
DIAG(F("shield not found\n"));

18
EthernetInterface.h
View File

@ -30,24 +30,14 @@
#include <Ethernet.h>
#include "RingStream.h"
/* some generated mac addresses as EthernetShields don't have one by default in HW.
* Sometimes they come on a sticker on the EthernetShield then use this address otherwise
* just choose one from below or generate one yourself. Only condition is that there is no
* other device on your network with the same Mac address.
*
* 52:b8:8a:8e:ce:21
* e3:e9:73:e1:db:0d
* 54:2b:13:52:ac:0c
* c2:d8:d4:7d:7c:cb
* 86:cf:fa:9f:07:79
*/
/**
* @brief Network Configuration
*
*/
#define MAC_ADDRESS { 0x52, 0xB8, 0x8A, 0x8E, 0xCE, 0x21 } // MAC address of your networking card found on the sticker on your card or take one from above
// this one is not used elsewhere and corresponds to your network layout
#ifndef MAC_ADDRESS
#error define MAC_ADDRESS in config.h
#endif
#define LISTEN_PORT 2560 // default listen port for the server
#define MAX_ETH_BUFFER 512
#define OUTBOUND_RING_SIZE 2048

11
config.example.h
View File

@ -96,7 +96,18 @@ The configuration file for DCC++ EX Command Station
//
// Uncomment to use with Ethernet Shields
//
// Ethernet Shields do not have have a MAC address in hardware. There may be one on
// a sticker on the Shield that you should use. Otherwise choose one of the ones below
// Be certain that no other device on your network has this same MAC address!
//
// 52:b8:8a:8e:ce:21
// e3:e9:73:e1:db:0d
// 54:2b:13:52:ac:0c
// NOTE: This is not used with ESP8266 WiFi modules.
//#define MAC_ADDRESS { 0x52, 0xB8, 0x8A, 0x8E, 0xCE, 0x21 } // MAC address of your networking card found on the sticker on your card or take one from above
//
// #define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xEF }

6
platformio.ini
View File

@ -37,9 +37,9 @@ lib_deps =
arduino-libraries/Ethernet
SPI
marcoschwartz/LiquidCrystal_I2C
adafruit/Adafruit BusIO
adafruit/Adafruit SSD1306
adafruit/Adafruit GFX Library
Adafruit/Adafruit_BusIO
Adafruit/Adafruit_SSD1306
Adafruit/Adafruit-GFX-Library
monitor_speed = 115200
monitor_flags = --echo