1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 21:21:24 +01:00

Merge pull request #2 from DCC-EX/master

merge upstream changes
This commit is contained in:
mstevetodd 2020-09-28 14:09:20 -04:00 committed by GitHub
commit fee0a75b36
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
28 changed files with 1696 additions and 733 deletions

View File

@ -13,5 +13,7 @@ jobs:
run: pip install wheel
- name: Install PlatformIO Core
run: pip install -U https://github.com/platformio/platformio/archive/v4.2.1.zip
- name: Copy generic config over
run: cp config.example.h config.h
- name: Compile Command Station (AVR)
run: python -m platformio run

1
.gitignore vendored
View File

@ -6,3 +6,4 @@ Release/*
.gcc-flags.json
.pio/
.vscode/
config.h

View File

@ -1,74 +1,141 @@
/*
* © 2020, Chris Harlow. All rights reserved.
*
* This file is a demonstattion of setting up a DCC-EX
* Command station to support direct connection of WiThrottle devices
* such as "Engine Driver". If you contriol your layout through JMRI
* then DON'T connect throttles to this wifi, connect them to JMRI.
*
* This is just 3 statements longer than the basic setup.
*
* THIS SETUP DOES NOT APPLY TO ARDUINO UNO WITH ONLY A SINGLE SERIAL PORT.
* REFER TO SEPARATE EXAMPLE.
*/
////////////////////////////////////////////////////////////////////////////////////
// © 2020, Chris Harlow. All rights reserved.
//
// This file is a demonstattion of setting up a DCC-EX
// Command station with optional support for direct connection of WiThrottle devices
// such as "Engine Driver". If you contriol your layout through JMRI
// then DON'T connect throttles to this wifi, connect them to JMRI.
//
// THE WIFI FEATURE IS NOT SUPPORTED ON ARDUINO DEVICES WITH ONLY 2KB RAM.
////////////////////////////////////////////////////////////////////////////////////
#include "config.h"
#include "DCCEX.h"
#ifdef ARDUINO_AVR_UNO
#include <SoftwareSerial.h>
SoftwareSerial Serial1(15,16); // YOU must get these pins correct to use Wifi on a UNO
#define WIFI_BAUD 9600
#else
#define WIFI_BAUD 115200
#endif
// Create a serial command parser... Enables certain diagnostics and commands
// to be issued from the USB serial console
// This is NOT intended for JMRI....
////////////////////////////////////////////////////////////////
//
// Enables an I2C 2x24 or 4x24 LCD Screen
#if ENABLE_LCD
bool lcdEnabled = false;
#if defined(LIB_TYPE_PCF8574)
LiquidCrystal_PCF8574 lcdDisplay(LCD_ADDRESS);
#elif defined(LIB_TYPE_I2C)
LiquidCrystal_I2C lcdDisplay = LiquidCrystal_I2C(LCD_ADDRESS, LCD_COLUMNS, LCD_LINES);
#endif
#endif
DCCEXParser serialParser;
// Create a serial command parser for the USB connection,
// This supports JMRI or manual diagnostics and commands
// to be issued from the USB serial console.
DCCEXParser serialParser;
void setup() {
void setup()
{
////////////////////////////////////////////
//
// More display stuff. Need to put this in a .h file and make
// it a class
#if ENABLE_LCD
Wire.begin();
// Check that we can find the LCD by its address before attempting to use it.
Wire.beginTransmission(LCD_ADDRESS);
if (Wire.endTransmission() == 0)
{
lcdEnabled = true;
lcdDisplay.begin(LCD_COLUMNS, LCD_LINES);
lcdDisplay.setBacklight(255);
lcdDisplay.clear();
lcdDisplay.setCursor(0, 0);
lcdDisplay.print("DCC++ EX v");
lcdDisplay.print(VERSION);
lcdDisplay.setCursor(0, 1);
#if COMM_INTERFACE >= 1
lcdDisplay.print("IP: PENDING");
#else
lcdDisplay.print("SERIAL: READY");
#endif
#if LCD_LINES > 2
lcdDisplay.setCursor(0, 3);
lcdDisplay.print("TRACK POWER: OFF");
#endif
}
#endif
// The main sketch has responsibilities during setup()
// Responsibility 1: Start the usb connection for diagnostics
// Responsibility 1: Start the usb connection for diagnostics
// This is normally Serial but uses SerialUSB on a SAMD processor
Serial.begin(115200);
// Start the WiFi interface on a MEGA, Uno cannot currently handle WiFi
// NOTE: References to Serial1 are for the serial port used to connect
// your wifi chip/shield.
Serial1.begin(WIFI_BAUD);
WifiInterface::setup(Serial1, F("Your network name"), F("your network password"),F("DCCEX"),3532);
// Responsibility 3: Start the DCC engine.
// Note: this provides DCC with two motor drivers, main and prog, which handle the motor shield(s)
// Standard supported devices have pre-configured macros but custome hardware installations require
// detailed pin mappings and may also require modified subclasses of the MotorDriver to implement specialist logic.
// Start the WiFi interface on a MEGA, Uno cannot currently handle WiFi
// NOTE: References to Serial1 are for the serial port used to connect
// your wifi chip/shield.
// STANDARD_MOTOR_SHIELD, POLOLU_MOTOR_SHIELD, FIREBOX_MK1, FIREBOX_MK1S are pre defined in MotorShields.h
#ifdef WIFI_ON
bool wifiUp = false;
const __FlashStringHelper *wifiESSID = F(WIFI_SSID);
const __FlashStringHelper *wifiPassword = F(WIFI_PASSWORD);
const __FlashStringHelper *dccex = F(WIFI_HOSTNAME);
const uint16_t port = IP_PORT;
// Optionally a Timer number (1..4) may be passed to DCC::begin to override the default Timer1 used for the
// waveform generation. e.g. DCC::begin(STANDARD_MOTOR_SHIELD,2); to use timer 2
DCC::begin(STANDARD_MOTOR_SHIELD);
Serial1.begin(WIFI_SERIAL_LINK_SPEED);
wifiUp = WifiInterface::setup(Serial1, wifiESSID, wifiPassword, dccex, port);
#if NUM_SERIAL > 1
if (!wifiUp)
{
Serial2.begin(WIFI_SERIAL_LINK_SPEED);
wifiUp = WifiInterface::setup(Serial2, wifiESSID, wifiPassword, dccex, port);
}
#if NUM_SERIAL > 2
if (!wifiUp)
{
Serial3.begin(WIFI_SERIAL_LINK_SPEED);
wifiUp = WifiInterface::setup(Serial3, wifiESSID, wifiPassword, dccex, port);
}
#endif // >2
#endif // >1
#endif // WIFI_ON
// Responsibility 3: Start the DCC engine.
// Note: this provides DCC with two motor drivers, main and prog, which handle the motor shield(s)
// Standard supported devices have pre-configured macros but custome hardware installations require
// detailed pin mappings and may also require modified subclasses of the MotorDriver to implement specialist logic.
// STANDARD_MOTOR_SHIELD, POLOLU_MOTOR_SHIELD, FIREBOX_MK1, FIREBOX_MK1S are pre defined in MotorShields.h
// Optionally a Timer number (1..4) may be passed to DCC::begin to override the default Timer1 used for the
// waveform generation. e.g. DCC::begin(STANDARD_MOTOR_SHIELD,2); to use timer 2
DCC::begin(MOTOR_SHIELD_TYPE);
}
void loop() {
void loop()
{
// The main sketch has responsibilities during loop()
// Responsibility 1: Handle DCC background processes
// (loco reminders and power checks)
DCC::loop();
DCC::loop();
// Responsibility 2: handle any incoming commands on USB connection
serialParser.loop(Serial);
// Responsibility 3: Optionally handle any incoming WiFi traffic
// Responsibility 3: Optionally handle any incoming WiFi traffic
#ifdef WIFI_ON
WifiInterface::loop();
#endif
// Optionally report any decrease in memory (will automatically trigger on first call)
#if ENABLE_FREE_MEM_WARNING
static int ramLowWatermark = 32767; // replaced on first loop
int freeNow = freeMemory();
if (freeNow < ramLowWatermark)
{
ramLowWatermark = freeNow;
DIAG(F("\nFree RAM=%d\n"), ramLowWatermark);
}
#endif
}

13
DCC.cpp
View File

@ -41,8 +41,10 @@ const byte FN_GROUP_3=0x04;
const byte FN_GROUP_4=0x08;
const byte FN_GROUP_5=0x10;
__FlashStringHelper* DCC::shieldName=NULL;
void DCC::begin(MotorDriver * mainDriver, MotorDriver* progDriver, byte timerNumber) {
void DCC::begin(const __FlashStringHelper* motorShieldName, MotorDriver * mainDriver, MotorDriver* progDriver, byte timerNumber) {
shieldName=(__FlashStringHelper*)motorShieldName;
DCCWaveform::begin(mainDriver,progDriver, timerNumber);
}
@ -205,7 +207,14 @@ void DCC::writeCVBitMain(int cab, int cv, byte bNum, bool bValue) {
void DCC::setProgTrackSyncMain(bool on) {
DCCWaveform::progTrackSyncMain=on;
}
void DCC::setProgTrackBoost(bool on) {
DCCWaveform::progTrackBoosted=on;
}
__FlashStringHelper* DCC::getMotorShieldName() {
return shieldName;
}
const ackOp PROGMEM WRITE_BIT0_PROG[] = {
BASELINE,
W0,WACK,
@ -568,7 +577,7 @@ void DCC::ackManagerLoop(bool blocking) {
DCCWaveform::progTrack.setPowerMode(POWERMODE::ON);
DCCWaveform::progTrack.sentResetsSincePacket = 0;
DCCWaveform::progTrack.autoPowerOff=true;
return;
if (!blocking) return;
}
if (checkResets(blocking, DCCWaveform::progTrack.autoPowerOff ? 20 : 3)) return;
DCCWaveform::progTrack.setAckBaseline();

190
DCC.h
View File

@ -24,118 +24,152 @@
typedef void (*ACK_CALLBACK)(int result);
enum ackOp { // Program opcodes for the ack Manager
BASELINE, // ensure enough resets sent before starting and obtain baseline current
W0,W1, // issue write bit (0..1) packet
WB, // issue write byte packet
VB, // Issue validate Byte packet
V0, // Issue validate bit=0 packet
V1, // issue validate bit=1 packlet
WACK, // wait for ack (or absence of ack)
ITC1, // If True Callback(1) (if prevous WACK got an ACK)
ITC0, // If True callback(0);
ITCB, // If True callback(byte)
NAKFAIL, // if false callback(-1)
FAIL, // callback(-1)
STARTMERGE, // Clear bit and byte settings ready for merge pass
MERGE, // Merge previous wack response with byte value and decrement bit number (use for readimng CV bytes)
SETBIT, // sets bit number to next prog byte
SETCV, // sets cv number to next prog byte
STASHLOCOID, // keeps current byte value for later
COMBINELOCOID, // combines current value with stashed value and returns it
ITSKIP, // skip to SKIPTARGET if ack true
SKIPTARGET=0xFF // jump to target
enum ackOp
{ // Program opcodes for the ack Manager
BASELINE, // ensure enough resets sent before starting and obtain baseline current
W0,
W1, // issue write bit (0..1) packet
WB, // issue write byte packet
VB, // Issue validate Byte packet
V0, // Issue validate bit=0 packet
V1, // issue validate bit=1 packlet
WACK, // wait for ack (or absence of ack)
ITC1, // If True Callback(1) (if prevous WACK got an ACK)
ITC0, // If True callback(0);
ITCB, // If True callback(byte)
NAKFAIL, // if false callback(-1)
FAIL, // callback(-1)
STARTMERGE, // Clear bit and byte settings ready for merge pass
MERGE, // Merge previous wack response with byte value and decrement bit number (use for readimng CV bytes)
SETBIT, // sets bit number to next prog byte
SETCV, // sets cv number to next prog byte
STASHLOCOID, // keeps current byte value for later
COMBINELOCOID, // combines current value with stashed value and returns it
ITSKIP, // skip to SKIPTARGET if ack true
SKIPTARGET = 0xFF // jump to target
};
// Allocations with memory implications..!
// Base system takes approx 900 bytes + 8 per loco. Turnouts, Sensors etc are dynamically created
#ifdef ARDUINO_AVR_UNO
const byte MAX_LOCOS=20;
#else
const byte MAX_LOCOS=50;
#endif
#ifdef ARDUINO_AVR_UNO
const byte MAX_LOCOS = 20;
#else
const byte MAX_LOCOS = 50;
#endif
class DCC {
public:
static void begin(MotorDriver * mainDriver, MotorDriver * progDriver, byte timerNumber=1);
class DCC
{
public:
static void begin(const __FlashStringHelper *motorShieldName, MotorDriver *mainDriver, MotorDriver *progDriver, byte timerNumber = 1);
static void loop();
// Public DCC API functions
static void setThrottle( uint16_t cab, uint8_t tSpeed, bool tDirection);
static void setThrottle(uint16_t cab, uint8_t tSpeed, bool tDirection);
static uint8_t getThrottleSpeed(int cab);
static bool getThrottleDirection(int cab);
static void writeCVByteMain(int cab, int cv, byte bValue);
static void writeCVBitMain(int cab, int cv, byte bNum, bool bValue);
static void setFunction( int cab, byte fByte, byte eByte);
static void setFn( int cab, byte functionNumber, bool on);
static int changeFn( int cab, byte functionNumber, bool pressed);
static void updateGroupflags(byte & flags, int functionNumber);
static void setAccessory(int aAdd, byte aNum, bool activate) ;
static bool writeTextPacket( byte *b, int nBytes);
static void setProgTrackSyncMain(bool on); // when true, prog track becomes driveable
// ACKable progtrack calls bitresults callback 0,0 or -1, cv returns value or -1
static void readCV(int cv, ACK_CALLBACK callback, bool blocking=false);
static void readCVBit(int cv, byte bitNum, ACK_CALLBACK callback, bool blocking=false); // -1 for error
static void writeCVByte(int cv, byte byteValue, ACK_CALLBACK callback, bool blocking=false) ;
static void writeCVBit(int cv, byte bitNum, bool bitValue, ACK_CALLBACK callback, bool blocking=false);
static void verifyCVByte(int cv, byte byteValue, ACK_CALLBACK callback, bool blocking=false) ;
static void verifyCVBit(int cv, byte bitNum, bool bitValue, ACK_CALLBACK callback, bool blocking=false);
static void getLocoId(ACK_CALLBACK callback, bool blocking=false);
static void setFunction(int cab, byte fByte, byte eByte);
static void setFn(int cab, byte functionNumber, bool on);
static int changeFn(int cab, byte functionNumber, bool pressed);
static void updateGroupflags(byte &flags, int functionNumber);
static void setAccessory(int aAdd, byte aNum, bool activate);
static bool writeTextPacket(byte *b, int nBytes);
static void setProgTrackSyncMain(bool on); // when true, prog track becomes driveable
static void setProgTrackBoost(bool on); // when true, special prog track current limit does not apply
// ACKable progtrack calls bitresults callback 0,0 or -1, cv returns value or -1
static void readCV(int cv, ACK_CALLBACK callback, bool blocking = false);
static void readCVBit(int cv, byte bitNum, ACK_CALLBACK callback, bool blocking = false); // -1 for error
static void writeCVByte(int cv, byte byteValue, ACK_CALLBACK callback, bool blocking = false);
static void writeCVBit(int cv, byte bitNum, bool bitValue, ACK_CALLBACK callback, bool blocking = false);
static void verifyCVByte(int cv, byte byteValue, ACK_CALLBACK callback, bool blocking = false);
static void verifyCVBit(int cv, byte bitNum, bool bitValue, ACK_CALLBACK callback, bool blocking = false);
static void getLocoId(ACK_CALLBACK callback, bool blocking = false);
// Enhanced API functions
static void forgetLoco(int cab); // removes any speed reminders for this loco
static void forgetAllLocos(); // removes all speed reminders
static void displayCabList(Print * stream);
private:
struct LOCO {
int loco;
byte speedCode;
byte groupFlags;
unsigned long functions;
static void forgetLoco(int cab); // removes any speed reminders for this loco
static void forgetAllLocos(); // removes all speed reminders
static void displayCabList(Print *stream);
static __FlashStringHelper *getMotorShieldName();
private:
struct LOCO
{
int loco;
byte speedCode;
byte groupFlags;
unsigned long functions;
};
static byte loopStatus;
static void setThrottle2( uint16_t cab, uint8_t speedCode);
static void setThrottle2(uint16_t cab, uint8_t speedCode);
static void updateLocoReminder(int loco, byte speedCode);
static void setFunctionInternal( int cab, byte fByte, byte eByte);
static void setFunctionInternal(int cab, byte fByte, byte eByte);
static bool issueReminder(int reg);
static int nextLoco;
static __FlashStringHelper *shieldName;
static LOCO speedTable[MAX_LOCOS];
static byte cv1(byte opcode, int cv);
static byte cv2(int cv);
static int lookupSpeedTable(int locoId);
static void issueReminders();
static void callback(int value);
// ACK MANAGER
static ackOp const * ackManagerProg;
static byte ackManagerByte;
static byte ackManagerBitNum;
static int ackManagerCv;
static byte ackManagerStash;
// ACK MANAGER
static ackOp const *ackManagerProg;
static byte ackManagerByte;
static byte ackManagerBitNum;
static int ackManagerCv;
static byte ackManagerStash;
static bool ackReceived;
static ACK_CALLBACK ackManagerCallback;
static ACK_CALLBACK ackManagerCallback;
static void ackManagerSetup(int cv, byte bitNumOrbyteValue, ackOp const program[], ACK_CALLBACK callback, bool blocking);
static void ackManagerLoop(bool blocking);
static bool checkResets(bool blocking, uint8_t numResets);
static const int PROG_REPEATS=8; // repeats of programming commands (some decoders need at least 8 to be reliable)
static const int PROG_REPEATS = 8; // repeats of programming commands (some decoders need at least 8 to be reliable)
// NMRA codes #
static const byte SET_SPEED=0x3f;
static const byte SET_SPEED = 0x3f;
static const byte WRITE_BYTE_MAIN = 0xEC;
static const byte WRITE_BIT_MAIN = 0xE8;
static const byte WRITE_BYTE = 0x7C;
static const byte VERIFY_BYTE= 0x74;
static const byte BIT_MANIPULATE=0x78;
static const byte WRITE_BIT=0xF0;
static const byte VERIFY_BIT=0xE0;
static const byte BIT_ON=0x08;
static const byte BIT_OFF=0x00;
static const byte VERIFY_BYTE = 0x74;
static const byte BIT_MANIPULATE = 0x78;
static const byte WRITE_BIT = 0xF0;
static const byte VERIFY_BIT = 0xE0;
static const byte BIT_ON = 0x08;
static const byte BIT_OFF = 0x00;
};
#ifdef ARDUINO_AVR_MEGA // is using Mega 1280, define as Mega 2560 (pinouts and functionality are identical)
#define ARDUINO_AVR_MEGA2560
#endif
#if defined(ARDUINO_AVR_UNO)
#define ARDUINO_TYPE "UNO"
#elif defined(ARDUINO_AVR_NANO)
#define ARDUINO_TYPE "NANO"
#elif defined(ARDUINO_AVR_MEGA2560)
#define ARDUINO_TYPE "MEGA"
#elif defined(ARDUINO_ARCH_MEGAAVR)
#define ARDUINO_TYPE "UNOWIFIR2"
#else
#error CANNOT COMPILE - DCC++ EX ONLY WORKS WITH AN ARDUINO UNO, NANO 328, OR ARDUINO MEGA 1280/2560
#endif
#if ENABLE_LCD
#include <Wire.h>
#if defined(LIB_TYPE_PCF8574)
#include <LiquidCrystal_PCF8574.h>
extern LiquidCrystal_PCF8574 lcdDisplay;
#elif defined(LIB_TYPE_I2C)
#include <LiquidCrystal_I2C.h>
extern LiquidCrystal_I2C lcdDisplay;
#endif
extern bool lcdEnabled;
#endif
#endif

12
DCCEX.h
View File

@ -1,7 +1,17 @@
// This include is intended to visually simplify the .ino for the end users.
// If there were any #ifdefs required they are much better handled in here.
#ifndef DCCEX_h
#define DCCEX_h
#include "defines.h"
#include "DCC.h"
#include "DIAG.h"
#include "DCCEXParser.h"
#include "version.h"
#include "WifiInterface.h"
#endif
#include "EthernetInterface.h"
#include <Arduino.h>
#endif

File diff suppressed because it is too large Load Diff

View File

@ -21,6 +21,7 @@
#include <Arduino.h>
typedef void (*FILTER_CALLBACK)(Print * stream, byte & opcode, byte & paramCount, int p[]);
typedef void (*AT_COMMAND_CALLBACK)(const byte * command);
struct DCCEXParser
{
@ -29,6 +30,7 @@ struct DCCEXParser
void parse(Print * stream, byte * command, bool blocking);
void flush();
static void setFilter(FILTER_CALLBACK filter);
static void setAtCommandCallback(AT_COMMAND_CALLBACK filter);
static const int MAX_PARAMS=10; // Must not exceed this
private:
@ -59,6 +61,7 @@ struct DCCEXParser
static void callback_Vbit(int result);
static void callback_Vbyte(int result);
static FILTER_CALLBACK filterCallback;
static AT_COMMAND_CALLBACK atCommandCallback;
static void funcmap(int cab, byte value, byte fstart, byte fstop);
};

View File

@ -30,6 +30,7 @@ DCCWaveform DCCWaveform::progTrack(PREAMBLE_BITS_PROG, false);
bool DCCWaveform::progTrackSyncMain=false;
bool DCCWaveform::progTrackBoosted=false;
VirtualTimer * DCCWaveform::interruptTimer=NULL;
void DCCWaveform::begin(MotorDriver * mainDriver, MotorDriver * progDriver, byte timerNumber) {
@ -123,10 +124,13 @@ void DCCWaveform::setPowerMode(POWERMODE mode) {
void DCCWaveform::checkPowerOverload() {
static int progTripValue = motorDriver->mA2raw(TRIP_CURRENT_PROG); // need only calculate once, hence static
if (millis() - lastSampleTaken < sampleDelay) return;
lastSampleTaken = millis();
int tripValue= motorDriver->rawCurrentTripValue;
if (!isMainTrack && (ackPending || progTrackSyncMain)) tripValue=ACK_CURRENT_TRIP;
if (!isMainTrack && !ackPending && !progTrackSyncMain && !progTrackBoosted)
tripValue=progTripValue;
switch (powerMode) {
case POWERMODE::OFF:
@ -143,12 +147,15 @@ void DCCWaveform::checkPowerOverload() {
if (power_sample_overload_wait>POWER_SAMPLE_OVERLOAD_WAIT) power_sample_overload_wait=POWER_SAMPLE_OVERLOAD_WAIT;
} else {
setPowerMode(POWERMODE::OVERLOAD);
unsigned int mA=motorDriver->convertToMilliamps(lastCurrent);
unsigned int maxmA=motorDriver->convertToMilliamps(tripValue);
unsigned int mA=motorDriver->raw2mA(lastCurrent);
unsigned int maxmA=motorDriver->raw2mA(tripValue);
DIAG(F("\n*** %S TRACK POWER OVERLOAD current=%d max=%d offtime=%l ***\n"), isMainTrack ? F("MAIN") : F("PROG"), mA, maxmA, power_sample_overload_wait);
power_good_counter=0;
sampleDelay = power_sample_overload_wait;
power_sample_overload_wait *= 2;
if (power_sample_overload_wait >= 10000)
power_sample_overload_wait = 10000;
else
power_sample_overload_wait *= 2;
}
break;
case POWERMODE::OVERLOAD:
@ -287,7 +294,7 @@ int DCCWaveform::getLastCurrent() {
void DCCWaveform::setAckBaseline() {
if (isMainTrack) return;
ackThreshold=motorDriver->getCurrentRaw() + (int)(65 / motorDriver->senseFactor);
if (Diag::ACK) DIAG(F("\nACK-BASELINE %d/%dmA"),ackThreshold,motorDriver->convertToMilliamps(ackThreshold));
if (Diag::ACK) DIAG(F("\nACK-BASELINE %d/%dmA"),ackThreshold,motorDriver->raw2mA(ackThreshold));
}
void DCCWaveform::setAckPending() {
@ -303,7 +310,7 @@ void DCCWaveform::setAckPending() {
byte DCCWaveform::getAck() {
if (ackPending) return (2); // still waiting
if (Diag::ACK) DIAG(F("\nACK-%S after %dmS max=%d/%dmA pulse=%duS"),ackDetected?F("OK"):F("FAIL"), ackCheckDuration,
ackMaxCurrent,motorDriver->convertToMilliamps(ackMaxCurrent), ackPulseDuration);
ackMaxCurrent,motorDriver->raw2mA(ackMaxCurrent), ackPulseDuration);
if (ackDetected) return (1); // Yes we had an ack
return(0); // pending set off but not detected means no ACK.
}

View File

@ -22,15 +22,17 @@
#include "MotorDriver.h"
#include "ArduinoTimers.h"
// Wait times for power management. Unit: milliseconds
const int POWER_SAMPLE_ON_WAIT = 100;
const int POWER_SAMPLE_OFF_WAIT = 1000;
const int POWER_SAMPLE_OVERLOAD_WAIT = 20;
// Ack time thresholds. Unit: microseconds
const int MIN_ACK_PULSE_DURATION = 2000;
const int MAX_ACK_PULSE_DURATION = 8500;
const int PREAMBLE_BITS_MAIN = 20;
// Number of preamble bits.
const int PREAMBLE_BITS_MAIN = 16;
const int PREAMBLE_BITS_PROG = 22;
@ -67,6 +69,7 @@ class DCCWaveform {
void setAckPending(); //prog track only
byte getAck(); //prog track only 0=NACK, 1=ACK 2=keep waiting
static bool progTrackSyncMain; // true when prog track is a siding switched to main
static bool progTrackBoosted; // true when prog track is not current limited
inline void doAutoPowerOff() {
if (autoPowerOff) {
setPowerMode(POWERMODE::OFF);
@ -105,7 +108,9 @@ class DCCWaveform {
POWERMODE powerMode;
unsigned long lastSampleTaken;
unsigned int sampleDelay;
static const int ACK_CURRENT_TRIP=1000; // During ACK processing limit can be higher
// Trip current for programming track, 250mA. Change only if you really
// need to be non-NMRA-compliant because of decoders that are not either.
static const int TRIP_CURRENT_PROG=250;
unsigned long power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
unsigned int power_good_counter = 0;

304
EthernetInterface.cpp Normal file
View File

@ -0,0 +1,304 @@
/*
* © 2020,Gregor Baues, Chris Harlow. All rights reserved.
*
* This file is part of DCC-EX/CommandStation-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*
* Ethernet Interface added by Gregor Baues
*/
#include "EthernetInterface.h"
#include "DIAG.h"
#include "StringFormatter.h"
//#include <SPI.h>
#include <Ethernet.h>
#include <EthernetUdp.h>
// Support Functions
/**
* @brief Aquire IP Address from DHCP; if that fails try a statically configured address
*
* @return true
* @return false
*/
bool EthernetInterface::setupConnection()
{
singleton=this;
DIAG(F("\nInitialize Ethernet with DHCP:"));
server = EthernetServer(LISTEN_PORT); // Ethernet Server listening on default port LISTEN_PORT
ip = IPAddress(IP_ADDRESS); // init with fixed IP address needed to get to the server
connected = false; // Connection status
streamer= new MemStream(buffer, MAX_ETH_BUFFER, MAX_ETH_BUFFER, true); // streamer who writes the results to the buffer
if (Ethernet.begin(EthernetInterface::mac) == 0)
{
DIAG(F("\nFailed to configure Ethernet using DHCP ... Trying with fixed IP"));
Ethernet.begin(EthernetInterface::mac, EthernetInterface::ip); // default ip address
if (Ethernet.hardwareStatus() == EthernetNoHardware)
{
DIAG(F("\nEthernet shield was not found. Sorry, can't run without hardware. :("));
return false;
};
if (Ethernet.linkStatus() == LinkOFF)
{
DIAG(F("\nEthernet cable is not connected."));
return false;
}
}
ip = Ethernet.localIP(); // reassign the obtained ip address
DIAG(F("\nLocal IP address: [%d.%d.%d.%d]"), ip[0], ip[1], ip[2], ip[3]);
DIAG(F("\nListening on port: [%d]"), port);
dnsip = Ethernet.dnsServerIP();
DIAG(F("\nDNS server IP address: [%d.%d.%d.%d] "), ip[0], ip[1], ip[2], ip[3]);
return true;
}
/**
* @brief Handles command requests recieved via UDP. UDP is a connection less, unreliable protocol as it doesn't maintain state but fast.
*
*/
void EthernetInterface::udpHandler() {
singleton->udpHandler2();
}
void EthernetInterface::udpHandler2()
{
int packetSize = Udp.parsePacket();
if (packetSize)
{
DIAG(F("\nReceived packet of size:[%d]\n"), packetSize);
IPAddress remote = Udp.remoteIP();
DIAG(F("From: [%d.%d.%d.%d:"), remote[0], remote[1], remote[2], remote[3]);
char portBuffer[6];
DIAG(F("%s]\n"), utoa(Udp.remotePort(), portBuffer, 10)); // DIAG has issues with unsigend int's so go through utoa
// read the packet into packetBufffer
Udp.read(packetBuffer, UDP_TX_PACKET_MAX_SIZE);
DIAG(F("Command: [%s]\n"), packetBuffer);
streamer->flush();
Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
ethParser.parse(streamer, (byte *)packetBuffer, true); // set to true so it is sync cf. WifiInterface
if (streamer->available() == 0)
{
DIAG(F("\nNo response\n"));
}
else
{
// send the reply
DIAG(F("Response: %s\n"), (char *)buffer);
Udp.write((char *)buffer);
Udp.endPacket();
}
memset(packetBuffer, 0, UDP_TX_PACKET_MAX_SIZE); // reset PacktBuffer
return;
}
}
/**
* @brief Handles command requests recieved via TCP. Supports up to the max# of simultaneous requests which is 8. The connection gets closed as soon as we finished processing
*
*/
void EthernetInterface::tcpHandler()
{
singleton->tcpHandler2();
}
void EthernetInterface::tcpHandler2()
{
// get client from the server
EthernetClient client = getServer().accept();
// check for new client
if (client)
{
for (byte i = 0; i < MAX_SOCK_NUM; i++)
{
if (!clients[i])
{
// On accept() the EthernetServer doesn't track the client anymore
// so we store it in our client array
clients[i] = client;
break;
}
}
}
// check for incoming data from all possible clients
for (byte i = 0; i < MAX_SOCK_NUM; i++)
{
if (clients[i] && clients[i].available() > 0)
{
// read bytes from a client
int count = clients[i].read(buffer, MAX_ETH_BUFFER);
buffer[count] = '\0'; // terminate the string properly
DIAG(F("\nReceived packet of size:[%d]\n"), count);
DIAG(F("From Client #: [%d]\n"), i);
DIAG(F("Command: [%s]\n"), buffer);
// as we use buffer for recv and send we have to reset the write position
streamer->setBufferContentPosition(0, 0);
ethParser.parse(streamer, buffer, true); // set to true to that the execution in DCC is sync
if (streamer->available() == 0)
{
DIAG(F("No response\n"));
}
else
{
buffer[streamer->available()] = '\0'; // mark end of buffer, so it can be used as a string later
DIAG(F("Response: %s\n"), (char *)buffer);
if (clients[i].connected())
{
clients[i].write(buffer, streamer->available());
}
}
}
// stop any clients which disconnect
for (byte i = 0; i < MAX_SOCK_NUM; i++)
{
if (clients[i] && !clients[i].connected())
{
DIAG(F("Disconnect client #%d \n"), i);
clients[i].stop();
}
}
}
}
// Class Functions
/**
* @brief Setup Ethernet Connection
*
* @param pt Protocol used
* @param localPort Port number for the connection
*/
void EthernetInterface::setup(protocolType pt, uint16_t localPort)
{
DIAG(F("\n++++++ Ethernet Setup In Progress ++++++++\n"));
port = localPort;
if (setupConnection())
{
DIAG(F("\nProtocol: [%s]\n"), pt ? "UDP" : "TCP");
switch (pt)
{
case UDP:
{
if (Udp.begin(localPort))
{
connected = true;
protocolHandler = udpHandler;
}
else
{
DIAG(F("\nUDP client failed to start"));
connected = false;
}
break;
};
case TCP:
{
Ethernet.begin(mac, ip);
EthernetServer server(localPort);
setServer(server);
server.begin();
connected = true;
protocolHandler = tcpHandler;
break;
};
default:
{
DIAG(F("Unkown Ethernet protocol; Setup failed"));
connected = false;
return;
}
}
}
else
{
connected = false;
};
DIAG(F("\n++++++ Ethernet Setup %S ++++++++\n"), connected ? F("OK") : F("FAILED"));
};
/**
* @brief Setup Ethernet on default port and user choosen protocol
*
* @param pt Protocol UDP or TCP
*/
void EthernetInterface::setup(protocolType pt)
{
setup(pt, LISTEN_PORT);
};
/**
* @brief Ethernet setup with defaults TCP / Listen Port
*
*/
void EthernetInterface::setup()
{
setup(TCP, LISTEN_PORT);
}
/**
* @brief Main loop for the EthernetInterface
*
*/
void EthernetInterface::loop()
{
switch (Ethernet.maintain())
{
case 1:
//renewed fail
DIAG(F("\nError: renewed fail"));
break;
case 2:
//renewed success
DIAG(F("\nRenewed success: "));
ip = Ethernet.localIP(); // reassign the obtained ip address
DIAG(F("\nLocal IP address: [%d.%d.%d.%d]"),ip[0], ip[1], ip[2], ip[3]);
break;
case 3:
//rebind fail
DIAG(F("Error: rebind fail"));
break;
case 4:
//rebind success
DIAG(F("Rebind success"));
ip = Ethernet.localIP(); // reassign the obtained ip address
DIAG(F("\nLocal IP address: [%d.%d.%d.%d]"), ip[0], ip[1], ip[2], ip[3]);
break;
default:
//nothing happened
break;
}
protocolHandler();
}

107
EthernetInterface.h Normal file
View File

@ -0,0 +1,107 @@
/*
* © 2020,Gregor Baues, Chris Harlow. All rights reserved.
*
* This file is part of DCC-EX/CommandStation-EX
*
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*
* Ethernet Interface added by Gregor Baues
*/
#ifndef EthernetInterface_h
#define EthernetInterface_h
#include "DCCEXParser.h"
#include "MemStream.h"
#include <Arduino.h>
#include <avr/pgmspace.h>
#include <Ethernet.h>
/* some generated mac addresses as EthernetShields don't have one by default in HW.
* Sometimes they come on a sticker on the EthernetShield then use this address otherwise
* just choose one from below or generate one yourself. Only condition is that there is no
* other device on your network with the same Mac address.
*
* 52:b8:8a:8e:ce:21
* e3:e9:73:e1:db:0d
* 54:2b:13:52:ac:0c
* c2:d8:d4:7d:7c:cb
* 86:cf:fa:9f:07:79
*/
/**
* @brief Network Configuration
*
*/
#define MAC_ADDRESS { 0x52, 0xB8, 0x8A, 0x8E, 0xCE, 0x21 } // MAC address of your networking card found on the sticker on your card or take one from above
#define IP_ADDRESS 10, 0, 0, 101 // Just in case we don't get an adress from DHCP try a static one; make sure
// this one is not used elsewhere and corresponds to your network layout
#define LISTEN_PORT 3366 // default listen port for the server
#define MAX_ETH_BUFFER 250
typedef void (*HTTP_CALLBACK)(Print * stream, byte * cmd);
enum protocolType {
TCP,
UDP
};
typedef void (*protocolCallback)();
class EthernetInterface {
private:
EthernetServer server;
public:
DCCEXParser ethParser;
bool connected;
byte mac[6];
IPAddress ip;
uint16_t port;
IPAddress dnsip;
void setup(protocolType pt, uint16_t lp); // specific port nummber
void setup(protocolType pt); // uses default port number
void setup(); // all defaults (protocol/port)
protocolCallback protocolHandler;
void loop();
private:
static EthernetInterface * singleton;
char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; // buffer to hold incoming UDP packet,
uint8_t buffer[MAX_ETH_BUFFER]; // buffer provided to the streamer to be filled with the reply (used by TCP also for the recv)
MemStream * streamer; // streamer who writes the results to the buffer
EthernetClient clients[MAX_SOCK_NUM]; // accept up to MAX_SOCK_NUM client connections at the same time; This depends on the chipset used on the Shield
bool setupConnection();
static void udpHandler();
static void tcpHandler();
void udpHandler2();
void tcpHandler2();
EthernetUDP Udp;
EthernetServer getServer() {
return server;
};
void setServer(EthernetServer s) {
server = s;
};
};
#endif

View File

@ -24,34 +24,43 @@ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#define MemStream_h
#include <inttypes.h>
#if defined(ARDUINO_ARCH_MEGAAVR)
#include <Arduino.h>
#else
#include <Stream.h>
#endif
#include <avr/pgmspace.h>
class MemStream : public Stream
{
private:
uint8_t * _buffer;
const uint16_t _len;
bool _buffer_overflow;
uint16_t _pos_read;
uint16_t _pos_write;
bool _allowWrite;
uint8_t *_buffer;
const uint16_t _len;
bool _buffer_overflow;
uint16_t _pos_read;
uint16_t _pos_write;
bool _allowWrite;
public:
// public methods
MemStream(uint8_t *buffer, const uint16_t len, uint16_t content_len = 0, bool allowWrite=true);
MemStream(uint8_t *buffer, const uint16_t len, uint16_t content_len = 0, bool allowWrite = true);
~MemStream() {}
operator const uint8_t *() const { return _buffer; }
operator const char *() const { return (const char*)_buffer; }
operator const char *() const { return (const char *)_buffer; }
uint16_t current_length() const { return _pos_write; }
bool listen() { return true; }
void end() {}
bool isListening() { return true; }
bool overflow() { bool ret = _buffer_overflow; _buffer_overflow = false; return ret; }
bool overflow()
{
bool ret = _buffer_overflow;
_buffer_overflow = false;
return ret;
}
int peek();
virtual size_t write(uint8_t byte);

View File

@ -76,6 +76,9 @@ int MotorDriver::getCurrentRaw() {
return analogReadFast(currentPin);
}
unsigned int MotorDriver::convertToMilliamps( int raw) {
unsigned int MotorDriver::raw2mA( int raw) {
return (unsigned int)(raw * senseFactor);
}
int MotorDriver::mA2raw( unsigned int mA) {
return (int)(mA / senseFactor);
}

View File

@ -27,7 +27,8 @@ class MotorDriver {
virtual void setSignal( bool high);
virtual void setBrake( bool on);
virtual int getCurrentRaw();
virtual unsigned int convertToMilliamps( int rawValue);
virtual unsigned int raw2mA( int raw);
virtual int mA2raw( unsigned int mA);
byte powerPin, signalPin, signalPin2, brakePin,currentPin,faultPin;
float senseFactor;

View File

@ -1,5 +1,8 @@
#ifndef MotorDrivers_h
#define MotorDrivers_h
#if defined(ARDUINO_ARCH_MEGAAVR)
#include <Arduino.h>
#endif
// *** PLEASE NOTE *** THIS FILE IS **NOT** INTENDED TO BE EDITED WHEN CONFIGURING A SYSTEM.
// It will be overwritten if the library is updated.
@ -7,37 +10,37 @@
// This file contains configurations for known/supported motor shields.
// A configuration defined by macro here can be used in your sketch.
// A custom hardware setup will require your sketch to create MotorDriver instances
// similar to those defined here, WITHOUT editing this file.
// similar to those defined here, WITHOUT editing this file. You can put your
// custom defines in config.h.
const byte UNUSED_PIN = 255;
// MotorDriver(byte power_pin, byte signal_pin, byte signal_pin2, byte brake_pin, byte current_pin,
// float senseFactor, unsigned int tripMilliamps, byte faultPin);
// Arduino standard Motor Shield
#define STANDARD_MOTOR_SHIELD \
new MotorDriver(3 , 12, UNUSED_PIN, UNUSED_PIN, A0, 2.99, 2000, UNUSED_PIN), \
new MotorDriver(11, 13, UNUSED_PIN, UNUSED_PIN, A1, 2.99, 250 , UNUSED_PIN)
#define STANDARD_MOTOR_SHIELD F("STANDARD_MOTOR_SHIELD"), \
new MotorDriver(3, 12, UNUSED_PIN, UNUSED_PIN, A0, 2.99, 2000, UNUSED_PIN), \
new MotorDriver(11, 13, UNUSED_PIN, UNUSED_PIN, A1, 2.99, 2000, UNUSED_PIN)
// Pololu Motor Shield
#define POLOLU_MOTOR_SHIELD \
new MotorDriver(4, 7, UNUSED_PIN, 9 , A0, 18, 2000, 12), \
new MotorDriver(2, 8, UNUSED_PIN, 10, A1, 18, 250 , UNUSED_PIN)
#define POLOLU_MOTOR_SHIELD F("POLOLU_MOTOR_SHIELD"), \
new MotorDriver(4, 7, UNUSED_PIN, 9, A0, 18, 3000, 12), \
new MotorDriver(2, 8, UNUSED_PIN, 10, A1, 18, 3000, UNUSED_PIN)
// Firebox Mk1
#define FIREBOX_MK1 \
new MotorDriver(3, 6, 7, UNUSED_PIN, A5, 9.766, 5500, UNUSED_PIN), \
new MotorDriver(4, 8, 9, UNUSED_PIN, A1, 5.00, 250 , UNUSED_PIN)
// Firebox Mk1
#define FIREBOX_MK1 F("FIREBOX_MK1"), \
new MotorDriver(3, 6, 7, UNUSED_PIN, A5, 9.766, 5500, UNUSED_PIN), \
new MotorDriver(4, 8, 9, UNUSED_PIN, A1, 5.00, 1000, UNUSED_PIN)
// Firebox Mk1S
#define FIREBOX_MK1S \
new MotorDriver(24, 21, 22, 25, 23, 9.766, 5500, UNUSED_PIN), \
new MotorDriver(30, 27, 28, 31, 29, 5.00, 250 , UNUSED_PIN)
// Firebox Mk1S
#define FIREBOX_MK1S F("FIREBOX_MK1A"), \
new MotorDriver(24, 21, 22, 25, 23, 9.766, 5500, UNUSED_PIN), \
new MotorDriver(30, 27, 28, 31, 29, 5.00, 1000, UNUSED_PIN)
// FunduMoto Motor Shield
#define FUNDUMOTO_SHIELD \
new MotorDriver(10 , 12, UNUSED_PIN, 9, A0, 2.99, 2000, UNUSED_PIN), \
new MotorDriver(11, 13, UNUSED_PIN, UNUSED_PIN, A1, 2.99, 250 , UNUSED_PIN)
#define FUNDUMOTO_SHIELD F("FUNDUMOTO_SHIELD"), \
new MotorDriver(10, 12, UNUSED_PIN, 9, A0, 2.99, 2000, UNUSED_PIN), \
new MotorDriver(11, 13, UNUSED_PIN, UNUSED_PIN, A1, 2.99, 2000, UNUSED_PIN)
#endif

View File

@ -12,7 +12,20 @@ The DCC++ EX Command Station consists of an Arduino micro controller fitted with
This repository, CommandStation-EX, contains a complete DCC++ EX Commmand Station sketch designed for compiling and uploading into an Arduino Uno, Mega, or Nano. All sketch files are in the folder named CommandStation-EX and its subforlders. More information about the sketch can be found in the included PDF file.
To utilize this sketch, you can use our automated installer, or download a zip file from this repository and open the file "CommandStation-EX.ino" after unzipping it to your Arduino IDE projects folder. Please do not rename the folder containing the sketch code, nor add any files in that folder. The Arduino IDE relies on the structure and name of the folder to properly display and compile the code.
To utilize this sketch, you can use the following methods:
* our automated installer
* download a zip file from this repository (green Code button above) and unzip it
* use git clone on this repository
With the manual methods you unzip or git clone to the Arduino IDE
projects folder and then open the file "CommandStation-EX.ino" in the
Arduino IDE. Please do not rename the folder containing the sketch
code, nor add any files in that folder. The Arduino IDE relies on the
structure and name of the folder to properly display and compile the
code. If you do not run the installer, you have to copy
config.example.h to config.h. If you do not have the standard config
you edit config.h according to the help texts in config.h.
The latest production release of the Master branch is 3.0.1:

View File

@ -85,10 +85,15 @@ ISR(TIMER2_OVF_vect)
#include "ATMEGA4809/Timer.h"
Timer TimerA(0);
Timer TimerA(1);
Timer TimerB(2);
ISR(TCA0_OVF_vect) {
ISR(TIMER1_OVF_vect) {
TimerA.isrCallback();
}
ISR(TIMER2_OVF_vect) {
TimerB.isrCallback();
}
#endif

View File

@ -1,7 +1,8 @@
/*
© 2020, Chris Harlow. All rights reserved.
© 2020, Harald Barth.
This file is part of Asbelos DCC API
This file is part of CommandStation-EX
This is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -16,10 +17,14 @@
You should have received a copy of the GNU General Public License
along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#include "WifiInterface.h"
#include "WifiInterface.h" /* config.h and defines.h included here */
#include <avr/pgmspace.h>
#include "DIAG.h"
#include "StringFormatter.h"
#include "WiThrottle.h"
const char PROGMEM READY_SEARCH[] = "\r\nready\r\n";
const char PROGMEM OK_SEARCH[] = "\r\nOK\r\n";
const char PROGMEM END_DETAIL_SEARCH[] = "@ 1000";
@ -35,30 +40,36 @@ unsigned long WifiInterface::loopTimeoutStart = 0;
int WifiInterface::datalength = 0;
int WifiInterface::connectionId;
byte WifiInterface::buffer[MAX_WIFI_BUFFER+1];
MemStream WifiInterface::streamer(buffer, MAX_WIFI_BUFFER);
MemStream * WifiInterface::streamer;
Stream * WifiInterface::wifiStream = NULL;
HTTP_CALLBACK WifiInterface::httpCallback = 0;
void WifiInterface::setup(Stream & setupStream, const __FlashStringHelper* SSid, const __FlashStringHelper* password,
bool WifiInterface::setup(Stream & setupStream, const __FlashStringHelper* SSid, const __FlashStringHelper* password,
const __FlashStringHelper* hostname, int port) {
static uint8_t ntry = 0;
ntry++;
wifiStream = &setupStream;
DIAG(F("\n++++++ Wifi Setup In Progress ++++++++\n"));
DIAG(F("\n++ Wifi Setup Try %d ++\n"), ntry);
connected = setup2( SSid, password, hostname, port);
if (connected) {
StringFormatter::send(wifiStream, F("ATE0\r\n")); // turn off the echo
checkForOK(200, OK_SEARCH, true);
}
DIAG(F("\n++++++ Wifi Setup %S ++++++++\n"), connected ? F("OK") : F("FAILED"));
streamer=new MemStream(buffer, MAX_WIFI_BUFFER);
parser.setAtCommandCallback(ATCommand);
DIAG(F("\n++ Wifi Setup %S ++\n"), connected ? F("OK") : F("FAILED"));
return connected;
}
bool WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringHelper* password,
const __FlashStringHelper* hostname, int port) {
int ipOK = 0;
bool ipOK = false;
bool oldCmd = false;
char macAddress[17]; // mac address extraction
@ -71,66 +82,99 @@ bool WifiInterface::setup2(const __FlashStringHelper* SSid, const __FlashStringH
return true;
}
StringFormatter::send(wifiStream, F("AT\r\n")); // Is something here that understands AT?
if(!checkForOK(200, OK_SEARCH, true))
return false; // No AT compatible WiFi module here
StringFormatter::send(wifiStream, F("ATE1\r\n")); // Turn on the echo, se we can see what's happening
checkForOK(2000, OK_SEARCH, true); // Makes this visible on the console
checkForOK(2000, OK_SEARCH, true); // Makes this visible on the console
// Display the AT version information
StringFormatter::send(wifiStream, F("AT+GMR\r\n"));
checkForOK(2000, OK_SEARCH, true, false); // Makes this visible on the console
delay(8000); // give a preconfigured ES8266 a chance to connect to a router
StringFormatter::send(wifiStream, F("AT+CIFSR\r\n"));
StringFormatter::send(wifiStream, F("AT+CWMODE=1\r\n")); // configure as "station" = WiFi client
checkForOK(1000, OK_SEARCH, true); // Not always OK, sometimes "no change"
// looking fpr mac addr eg +CIFSR:APMAC,"be:dd:c2:5c:6b:b7"
if (checkForOK(5000, (const char*) F("+CIFSR:APMAC,\""), true,false)) {
// Copy 17 byte mac address
for (int i=0; i<17;i++) {
while(!wifiStream->available());
macAddress[i]=wifiStream->read();
StringFormatter::printEscape(macAddress[i]);
}
}
char macTail[]={macAddress[9],macAddress[10],macAddress[12],macAddress[13],macAddress[15],macAddress[16],'\0'};
// If the source code looks unconfigured, check if the
// ESP8266 is preconfigured. We check the first 13 chars
// of the password.
if (strncmp_P("Your network ",(const char*)password,13) == 0) {
delay(8000); // give a preconfigured ES8266 a chance to connect to a router
StringFormatter::send(wifiStream, F("AT+CIFSR\r\n"));
if (checkForOK(5000, (const char*) F("+CIFSR:STAIP"), true,false))
if (!checkForOK(1000, (const char*) F("0.0.0.0"), true,false))
ipOK = true;
} else {
if (!ipOK) {
// Older ES versions have AT+CWJAP, newer ones have AT+CWJAP_CUR and AT+CWHOSTNAME
StringFormatter::send(wifiStream, F("AT+CWJAP?\r\n"));
if (checkForOK(2000, OK_SEARCH, true)) {
oldCmd=true;
while (wifiStream->available()) StringFormatter::printEscape( wifiStream->read()); /// THIS IS A DIAG IN DISGUISE
// AT command early version supports CWJAP/CWSAP
if (SSid) {
StringFormatter::send(wifiStream, F("AT+CWJAP=\"%S\",\"%S\"\r\n"), SSid, password);
ipOK = checkForOK(16000, OK_SEARCH, true);
}
DIAG(F("\n**\n"));
} else {
// later version supports CWJAP_CUR
StringFormatter::send(wifiStream, F("AT+CWHOSTNAME=\"%S\"\r\n"), hostname); // Set Host name for Wifi Client
checkForOK(2000, OK_SEARCH, true); // dont care if not supported
if (checkForOK(5000, (const char*) F("+CIFSR:STAIP"), true,false))
if (!checkForOK(1000, (const char*) F("0.0.0.0"), true,false))
ipOK = 1;
if (SSid) {
StringFormatter::send(wifiStream, F("AT+CWJAP_CUR=\"%S\",\"%S\"\r\n"), SSid, password);
ipOK = checkForOK(20000, OK_SEARCH, true);
}
}
delay(8000); // give a preconfigured ES8266 a chance to connect to a router
if (ipOK) {
// But we really only have the ESSID and password correct
// Let's check for IP
ipOK = false;
StringFormatter::send(wifiStream, F("AT+CIFSR\r\n"));
if (checkForOK(5000, (const char*) F("+CIFSR:STAIP"), true,false))
if (!checkForOK(1000, (const char*) F("0.0.0.0"), true,false))
ipOK = true;
}
}
}
if (!ipOK) {
StringFormatter::send(wifiStream, F("AT+CWMODE=3\r\n")); // configure as server or access point
// If we have not managed to get this going in station mode, go for AP mode
StringFormatter::send(wifiStream, F("AT+CWMODE=2\r\n")); // configure as AccessPoint.
checkForOK(1000, OK_SEARCH, true); // Not always OK, sometimes "no change"
// Older ES versions have AT+CWJAP, newer ones have AT+CWJAP_CUR and AT+CWHOSTNAME
StringFormatter::send(wifiStream, F("AT+CWJAP?\r\n"));
if (checkForOK(2000, OK_SEARCH, true)) {
while (wifiStream->available()) StringFormatter::printEscape( wifiStream->read()); /// THIS IS A DIAG IN DISGUISE
// AT command early version supports CWJAP/CWSAP
if (SSid) {
StringFormatter::send(wifiStream, F("AT+CWJAP=\"%S\",\"%S\"\r\n"), SSid, password);
checkForOK(16000, OK_SEARCH, true); // can ignore failure as AP mode may still be ok
// Figure out MAC addr
StringFormatter::send(wifiStream, F("AT+CIFSR\r\n"));
// looking fpr mac addr eg +CIFSR:APMAC,"be:dd:c2:5c:6b:b7"
if (checkForOK(5000, (const char*) F("+CIFSR:APMAC,\""), true,false)) {
// Copy 17 byte mac address
for (int i=0; i<17;i++) {
while(!wifiStream->available());
macAddress[i]=wifiStream->read();
StringFormatter::printEscape(macAddress[i]);
}
DIAG(F("\n**\n"));
// establish the APname
}
char macTail[]={macAddress[9],macAddress[10],macAddress[12],macAddress[13],macAddress[15],macAddress[16],'\0'};
if (oldCmd) {
while (wifiStream->available()) StringFormatter::printEscape( wifiStream->read()); /// THIS IS A DIAG IN DISGUISE
StringFormatter::send(wifiStream, F("AT+CWSAP=\"DCCEX_%s\",\"PASS_%s\",1,4\r\n"), macTail, macTail);
checkForOK(16000, OK_SEARCH, true); // can ignore failure as AP mode may still be ok
}
else {
// later version supports CWJAP_CUR
StringFormatter::send(wifiStream, F("AT+CWHOSTNAME=\"%S\"\r\n"), hostname); // Set Host name for Wifi Client
checkForOK(2000, OK_SEARCH, true); // dont care if not supported
} else {
if (SSid) {
StringFormatter::send(wifiStream, F("AT+CWJAP_CUR=\"%S\",\"%S\"\r\n"), SSid, password);
checkForOK(20000, OK_SEARCH, true); // can ignore failure as AP mode may still be ok
}
StringFormatter::send(wifiStream, F("AT+CWSAP_CUR=\"DCCEX_%s\",\"PASS_%s\",1,4\r\n"), macTail, macTail);
checkForOK(20000, OK_SEARCH, true); // can ignore failure as SSid mode may still be ok
@ -257,15 +301,15 @@ void WifiInterface::loop() {
case 6: // reading for length
if (ch == ':') loopstate = (datalength == 0) ? 99 : 7; // 99 is getout without reading next char
else datalength = datalength * 10 + (ch - '0');
streamer.flush(); // basically sets write point at start of buffer
streamer->flush(); // basically sets write point at start of buffer
break;
case 7: // reading data
streamer.write(ch); // NOTE: The MemStream will throw away bytes that do not fit in the buffer.
streamer->write(ch); // NOTE: The MemStream will throw away bytes that do not fit in the buffer.
// This protects against buffer overflows even with things as innocent
// as a browser which send massive, irrlevent HTTP headers.
datalength--;
if (datalength == 0) {
buffer[streamer.available()]='\0'; // mark end of buffer, so it can be used as a string later
buffer[streamer->available()]='\0'; // mark end of buffer, so it can be used as a string later
loopstate = 99;
}
break;
@ -308,8 +352,8 @@ void WifiInterface::loop() {
loopstate = 1;
}
if (ch == 'K') { // assume its in SEND OK
if (Diag::WIFI) DIAG(F("\n\n Wifi BUSY RETRYING.. AT+CIPSEND=%d,%d\r\n"), connectionId, streamer.available());
StringFormatter::send(wifiStream, F("AT+CIPSEND=%d,%d\r\n"), connectionId, streamer.available());
if (Diag::WIFI) DIAG(F("\n\n Wifi BUSY RETRYING.. AT+CIPSEND=%d,%d\r\n"), connectionId, streamer->available());
StringFormatter::send(wifiStream, F("AT+CIPSEND=%d,%d\r\n"), connectionId, streamer->available());
loopTimeoutStart = millis();
loopstate = 10; // non-blocking loop waits for > before sending
break;
@ -322,7 +366,7 @@ void WifiInterface::loop() {
// AT this point we have read an incoming message into the buffer
if (Diag::WIFI) DIAG(F("\n%l Wifi(%d)<-[%e]\n"), millis(),connectionId, buffer);
streamer.setBufferContentPosition(0, 0); // reset write position to start of buffer
streamer->setBufferContentPosition(0, 0); // reset write position to start of buffer
// SIDE EFFECT WARNING:::
// We know that parser will read the entire buffer before starting to write to it.
// Otherwise we would have to copy the buffer elsewhere and RAM is in short supply.
@ -331,18 +375,18 @@ void WifiInterface::loop() {
// Intercept HTTP requests
if (isHTTP()) {
if (httpCallback) httpCallback(&streamer, buffer);
if (httpCallback) httpCallback(streamer, buffer);
else {
StringFormatter::send(streamer, F("HTTP/1.1 404 Not Found\nContent-Type: text/html\nConnnection: close\n\n"));
StringFormatter::send(streamer, F("<html><body>This is <b>not</b> a web server.<br/></body></html>"));
}
closeAfter = true;
}
else if (buffer[0] == '<') parser.parse(&streamer, buffer, true); // tell JMRI parser that ACKS are blocking because we can't handle the async
else if (buffer[0] == '<') parser.parse(streamer, buffer, true); // tell JMRI parser that ACKS are blocking because we can't handle the async
else WiThrottle::getThrottle(connectionId)->parse(streamer, buffer);
else WiThrottle::getThrottle(connectionId)->parse(*streamer, buffer);
if (streamer.available() == 0) {
if (streamer->available() == 0) {
// No reply
if (closeAfter) {
if (Diag::WIFI) DIAG(F("AT+CIPCLOSE=%d\r\n"), connectionId);
@ -352,10 +396,10 @@ void WifiInterface::loop() {
return;
}
// prepare to send reply
buffer[streamer.available()]='\0'; // mark end of buffer, so it can be used as a string later
if (Diag::WIFI) DIAG(F("%l WiFi(%d)->[%e] l(%d)\n"), millis(), connectionId, buffer, streamer.available());
if (Diag::WIFI) DIAG(F("AT+CIPSEND=%d,%d\r\n"), connectionId, streamer.available());
StringFormatter::send(wifiStream, F("AT+CIPSEND=%d,%d\r\n"), connectionId, streamer.available());
buffer[streamer->available()]='\0'; // mark end of buffer, so it can be used as a string later
if (Diag::WIFI) DIAG(F("%l WiFi(%d)->[%e] l(%d)\n"), millis(), connectionId, buffer, streamer->available());
if (Diag::WIFI) DIAG(F("AT+CIPSEND=%d,%d\r\n"), connectionId, streamer->available());
StringFormatter::send(wifiStream, F("AT+CIPSEND=%d,%d\r\n"), connectionId, streamer->available());
loopTimeoutStart = millis();
loopstate = 10; // non-blocking loop waits for > before sending
}

View File

@ -1,7 +1,8 @@
/*
* © 2020, Chris Harlow. All rights reserved.
* © 2020, Harald Barth.
*
* This file is part of Asbelos DCC API
* This file is part of CommandStation-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -16,7 +17,6 @@
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#ifndef WifiInterface_h
#define WifiInterface_h
#include "DCCEXParser.h"
@ -24,34 +24,34 @@
#include <Arduino.h>
#include <avr/pgmspace.h>
typedef void (*HTTP_CALLBACK)(Print * stream, byte * cmd);
typedef void (*HTTP_CALLBACK)(Print *stream, byte *cmd);
class WifiInterface {
class WifiInterface
{
public:
static void setup(Stream & setupStream, const __FlashStringHelper* SSSid, const __FlashStringHelper* password,
const __FlashStringHelper* hostname, int port);
static void loop();
static void ATCommand(const byte * command);
static void setHTTPCallback(HTTP_CALLBACK callback);
private:
static Stream * wifiStream;
static DCCEXParser parser;
static bool setup2( const __FlashStringHelper* SSSid, const __FlashStringHelper* password,
const __FlashStringHelper* hostname, int port);
static bool checkForOK(const unsigned int timeout, const char* waitfor, bool echo, bool escapeEcho=true);
static bool isHTTP();
static HTTP_CALLBACK httpCallback;
static bool connected;
static bool closeAfter;
static byte loopstate;
static int datalength;
static int connectionId;
static unsigned long loopTimeoutStart;
static const byte MAX_WIFI_BUFFER=250;
static byte buffer[MAX_WIFI_BUFFER+1];
static MemStream streamer;
public:
static bool setup(Stream &setupStream, const __FlashStringHelper *SSSid, const __FlashStringHelper *password,
const __FlashStringHelper *hostname, int port);
static void loop();
static void ATCommand(const byte *command);
static void setHTTPCallback(HTTP_CALLBACK callback);
private:
static Stream *wifiStream;
static DCCEXParser parser;
static bool setup2(const __FlashStringHelper *SSSid, const __FlashStringHelper *password,
const __FlashStringHelper *hostname, int port);
static bool checkForOK(const unsigned int timeout, const char *waitfor, bool echo, bool escapeEcho = true);
static bool isHTTP();
static HTTP_CALLBACK httpCallback;
static bool connected;
static bool closeAfter;
static byte loopstate;
static int datalength;
static int connectionId;
static unsigned long loopTimeoutStart;
static const byte MAX_WIFI_BUFFER = 250;
static byte buffer[MAX_WIFI_BUFFER + 1];
static MemStream * streamer;
};
#endif

106
config.example.h Normal file
View File

@ -0,0 +1,106 @@
/**********************************************************************
Config.h
COPYRIGHT (c) 2013-2016 Gregg E. Berman
COPYRIGHT (c) 2020 Fred Decker
The configuration file for DCC++ EX Command Station
**********************************************************************/
/////////////////////////////////////////////////////////////////////////////////////
// NOTE: Before connecting these boards and selecting one in this software
// check the quick install guides!!! Some of these boards require a voltage
// generating resitor on the current sense pin of the device. Failure to select
// the correct resistor could damage the sense pin on your Arduino or destroy
// the device.
//
// DEFINE MOTOR_SHIELD_TYPE BELOW ACCORDING TO THE FOLLOWING TABLE:
//
// STANDARD_MOTOR_SHIELD : Arduino Motor shield Rev3 based on the L298 with 18V 2A per channel
// POLOLU_MOTOR_SHIELD : Pololu MC33926 Motor Driver (not recommended for prog track)
// FUNDUMOTO_SHIELD : Fundumoto Shield, no current sensing (not recommended, no short protection)
// FIREBOX_MK1 : The Firebox MK1
// FIREBOX_MK1S : The Firebox MK1S
// |
// +-----------------------v
//
#define MOTOR_SHIELD_TYPE STANDARD_MOTOR_SHIELD
/////////////////////////////////////////////////////////////////////////////////////
//
// The IP port to talk to a WIFI or Ethernet shield.
//
#define IP_PORT 2560
/////////////////////////////////////////////////////////////////////////////////////
//
// NOTE: Only supported on Arduino Mega
// Set to false if you not even want it on the Arduino Mega
//
#define ENABLE_WIFI true
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE WiFi Parameters (only in effect if WIFI is on)
//
#define WIFI_SSID "Your network name"
#define WIFI_PASSWORD "Your network passwd"
#define WIFI_HOSTNAME "dccex"
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE STATIC IP ADDRESS *OR* COMMENT OUT TO USE DHCP
//
//#define IP_ADDRESS { 192, 168, 1, 200 }
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE MAC ADDRESS ARRAY FOR ETHERNET COMMUNICATIONS INTERFACE
//
// Uncomment to use with Ethernet Shields
//
// NOTE: This is not used with ESP8266 WiFi modules.
//
// #define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xEF }
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE LCD SCREEN USAGE BY THE BASE STATION
//
// Note: This feature requires an I2C enabled LCD screen using a PCF8574 based chipset.
// or one using a Hitachi HD44780.
//
// To enable, uncomment the line below and make sure only the correct LIB_TYPE line
// is uncommented below to select the library used for your LCD backpack
//#define ENABLE_LCD
#ifdef ENABLE_LCD
#define LIB_TYPE_PCF8574
//#define LIB_TYPE_I2C
// This defines the I2C address for the LCD device
#define LCD_ADDRESS 0x27 //common defaults are 0x27 and 0x3F
// This defines the number of columns the LCD device has
#define LCD_COLUMNS 16
// This defines the number of lines the LCD device has
#define LCD_LINES 2
#endif
/////////////////////////////////////////////////////////////////////////////////////
//
// Enable custom command filtering
#define ENABLE_CUSTOM_FILTER false
/////////////////////////////////////////////////////////////////////////////////////
//
// Enable custom command filtering
#define ENABLE_CUSTOM_CALLBACK false
/////////////////////////////////////////////////////////////////////////////////////
//
// Enable custom command filtering
#define ENABLE_FREE_MEM_WARNING false

45
defines.h Normal file
View File

@ -0,0 +1,45 @@
/*
© 2020, Harald Barth.
This file is part of CommandStation-EX
This is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
It is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
////////////////////////////////////////////////////////////////////////////////
//
// WIFI_ON: All prereqs for running with WIFI are met
//
#if ENABLE_WIFI && (defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560))
#define WIFI_ON
#endif
////////////////////////////////////////////////////////////////////////////////
//
// This defines the speed at which the Arduino will communicate with the ESP8266 module.
// Currently only devices which can communicate at 115200 are supported.
//
#define WIFI_SERIAL_LINK_SPEED 115200
////////////////////////////////////////////////////////////////////////////////
//
// Figure out number of serial ports depending on hardware
//
#if (defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560))
#define NUM_SERIAL 3
#endif
#ifndef NUM_SERIAL
#define NUM_SERIAL 1
#endif

42
freeMemory.cpp Normal file
View File

@ -0,0 +1,42 @@
/*
* © 2020, Harald Barth
*
* This file is part of Asbelos DCC-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#include "freeMemory.h"
// thanks go to https://github.com/mpflaga/Arduino-MemoryFree
#if defined(__arm__)
extern "C" char* sbrk(int);
#elif defined(__AVR__)
extern char *__brkval;
extern char *__malloc_heap_start;
#else
#error Unsupported board type
#endif
int freeMemory() {
char top;
#if defined(__arm__)
return &top - reinterpret_cast<char*>(sbrk(0));
#elif defined(__AVR__)
return __brkval ? &top - __brkval : &top - __malloc_heap_start;
#else
#error bailed out alredy above
#endif
}

View File

@ -1,20 +1,23 @@
/*
* © 2020, Harald Barth
*
* This file is part of DCC-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#ifndef freeMemory_h
#define freeMemory_h
// thanks go to https://github.com/mpflaga/Arduino-MemoryFree
#ifdef __arm__
// should use uinstd.h to define sbrk but Due causes a conflict
extern "C" char* sbrk(int incr);
#else // __ARM__
extern char *__brkval;
#endif // __arm__
int freeMemory() {
char top;
#ifdef __arm__
return &top - reinterpret_cast<char*>(sbrk(0));
#else // __arm__
return __brkval ? &top - __brkval : &top - __malloc_heap_start;
#endif // __arm__
}
int freeMemory();
#endif

View File

@ -1,12 +1,14 @@
ECHO ON
FOR /F "delims=" %%i IN ('dir %TMP%\arduino_build_* /b /ad-h /t:c /od') DO SET a=%%i
echo Most recent subfolder: %a% >%TMP%\OBJDUMP_%a%.txt
avr-objdump --private=mem-usage %TMP%\%a%\DCCEX.ino.elf >>%TMP%\OBJDUMP_%a%.txt
SET ELF=%TMP%\%a%\CommandStation-EX.ino.elf
avr-objdump --private=mem-usage %ELF% >>%TMP%\OBJDUMP_%a%.txt
ECHO ++++++++++++++++++++++++++++++++++ >>%TMP%\OBJDUMP_%a%.txt
avr-objdump -x -C %TMP%\%a%\DCCEX.ino.elf | find ".text" | sort /+25 /R >>%TMP%\OBJDUMP_%a%.txt
avr-objdump -x -C %ELF% | find ".text" | sort /+25 /R >>%TMP%\OBJDUMP_%a%.txt
ECHO ++++++++++++++++++++++++++++++++++ >>%TMP%\OBJDUMP_%a%.txt
avr-objdump -x -C %TMP%\%a%\DCCEX.ino.elf | find ".data" | sort /+25 /R >>%TMP%\OBJDUMP_%a%.txt
avr-objdump -x -C %ELF% | find ".data" | sort /+25 /R >>%TMP%\OBJDUMP_%a%.txt
ECHO ++++++++++++++++++++++++++++++++++ >>%TMP%\OBJDUMP_%a%.txt
avr-objdump -x -C %TMP%\%a%\DCC.ino.elf | find ".bss" | sort /+25 /R >>%TMP%\OBJDUMP_%a%.txt
avr-objdump -x -C %ELF% | find ".bss" | sort /+25 /R >>%TMP%\OBJDUMP_%a%.txt
notepad %TMP%\OBJDUMP_%a%.txt
EXIT

View File

@ -4,9 +4,10 @@
ARDUINOBIN=$(ls -l $(type -p arduino)| awk '{print $NF ; exit 0}')
PATH=$(dirname "$ARDUINOBIN")/hardware/tools/avr/bin:$PATH
avr-objdump --private=mem-usage /tmp/arduino_build_233823/Blinkhabaplus.ino.elf
LASTBUILD=$(ls -tr /tmp/arduino_build_*/*.ino.elf | tail -1)
avr-objdump --private=mem-usage "$LASTBUILD"
for segment in .text .data .bss ; do
echo '++++++++++++++++++++++++++++++++++'
avr-objdump -x -C /tmp/arduino_build_233823/Blinkhabaplus.ino.elf | awk '$2 == "'$segment'" && $3 != 0 {print $3,$2} ; $4 == "'$segment'" && $5 != 0 { print $5,$6}' | sort -r
avr-objdump -x -C "$LASTBUILD" | awk '$2 == "'$segment'" && $3 != 0 {print $3,$2} ; $4 == "'$segment'" && $5 != 0 { print $5,$6}' | sort -r
done

View File

@ -24,6 +24,8 @@ upload_protocol = atmel-ice
lib_deps =
${env.lib_deps}
SparkFun External EEPROM Arduino Library
monitor_speed = 115200
monitor_flags = --echo
[env:mega2560]
platform = atmelavr
@ -32,6 +34,11 @@ framework = arduino
lib_deps =
${env.lib_deps}
DIO2
arduino-libraries/Ethernet
SPI
mathertel/LiquidCrystal_PCF8574
monitor_speed = 115200
monitor_flags = --echo
[env:mega328]
platform = atmelavr
@ -40,6 +47,11 @@ framework = arduino
lib_deps =
${env.lib_deps}
DIO2
arduino-libraries/Ethernet
SPI
mathertel/LiquidCrystal_PCF8574
monitor_speed = 115200
monitor_flags = --echo
[env:unowifiR2]
platform = atmelmegaavr
@ -48,6 +60,11 @@ framework = arduino
lib_deps =
${env.lib_deps}
DIO2
arduino-libraries/Ethernet
SPI
mathertel/LiquidCrystal_PCF8574
monitor_speed = 115200
monitor_flags = --echo
[env:uno]
platform = atmelavr
@ -56,3 +73,8 @@ framework = arduino
lib_deps =
${env.lib_deps}
DIO2
arduino-libraries/Ethernet
SPI
mathertel/LiquidCrystal_PCF8574
monitor_speed = 115200
monitor_flags = --echo

10
version.h Normal file
View File

@ -0,0 +1,10 @@
#ifndef version_h
#define version_h
#include "StringFormatter.h"
// const char VERSION[] PROGMEM ="0.2.0";
#define VERSION "0.2.0"
#endif