1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-28 22:51:25 +01:00
Commit Graph

15 Commits

Author SHA1 Message Date
Neil McKechnie
107e9d1d62
Fix turnout handling of EEPROM (#147)
On activation, Turnout code was saving entire EEPROM twice, even if EEPROM save was switched off with the <e> command.  It's now been changed so that only the tStatus byte is updated, and only if the turnout has previously been saved into EEPROM.
2021-05-07 00:12:33 +01:00
Fred
d7b2cf3d76
Assorted bits (#138)
* LCN

* Prevent deprecated compiler warning

* Implement huge function numbers

* new commands

<! [cab]> forget locos.
<9> ESTOP ALL.
<D RESET> reboot arduino

* Waveform accuracy msg

* Drop post-write verify

* UNUSED_PIN current measure

and callback -2 for cv actions.

* Correct diags

* ESTOP a forget loco

* ESTOP loco on forget

* Avoid compiler warning

* current sensor offset

* Restore <1 JOIN> after prog track operation

* <!> ESTOP <-> FORGET

* Auto current offset detection

* manage current offset and diagnostics

* neater msg at startup

* Add startup message to LCN master

* DCC::setJoinRelayPin

Co-authored-by: Asbelos <asbelos@btinternet.com>
2021-03-23 10:37:05 -04:00
mstevetodd
42075f838e
<T> should send turnout definitions, not just states (#110)
* use int, not byte for witSpeed

* add turnout, sensor and output states to 's'tatus message

* <T> should send turnout definitions, not just states
2021-01-04 10:57:03 -05:00
Harald Barth
75d7547f11 Turnouts stored to EEPROM without trashing other stuff 2020-10-03 14:07:25 +02:00
Asbelos
4e0c227012 Cleaning of Turnout/Output/Sensor
PLEASE BE AWARE, I have not tested Outputs or Sensors either before or after this change.
(and they were certainly wrong before!)
2020-09-06 12:44:19 +01:00
Asbelos
f7557f1436 Turn out changes for WiThrottle 2020-08-20 12:38:09 +01:00
Asbelos
9044cce2a3 Change Stream refernces to pointers
I misunderstood that references can never be changed.
2020-08-01 16:32:16 +01:00
Asbelos
575b5da606 WiThrottle turnout improvement 2020-07-23 17:34:35 +01:00
Asbelos
964f39d376 Fix hanging turnouts
Caused by tt->activate call when Turnouts was a struct not a class!
2020-07-23 12:48:38 +01:00
Asbelos
46d1f3e237 Copyrights etc 2020-07-03 17:35:02 +01:00
Asbelos
e7e4d4fbd9 Drop railcom and prepare for servo turnouts 2020-06-23 17:43:50 +01:00
Asbelos
7c68a9de70 virtual turnout activate 2020-06-22 11:58:33 +01:00
Asbelos
e0c76a9dc4 Alter Stream to Print
In prep for Wifi siolution, all output  functions changed to expect Print class instead of Stream... Can still pass Serial1 etc because Stream extends Print, but this allows for an output-only class extending Print to collect a response buffer for Wifi sending with AT commands.
2020-06-12 14:28:35 +01:00
Asbelos
7a20896c8c RTFM not the comments
Comments have a horrible habit of getting out of date.
2020-06-07 20:11:44 +01:00
Asbelos
b89c9068ff Compileable JMRIParser
Has Turnout, Output Sensor support.
Needs further cleaning and cross checking against spec.
May implement Daves Comms manager etc.
2020-06-03 14:26:49 +01:00