STM32 Use UID_BASE to get MAC address

DCCTimerSTM32.cpp

@@ -52,7 +52,7 @@ HardwareSerial Serial6(PA12, PA11);  // Rx=PA12, Tx=PA11 -- CN10 pins 12 and 14
 HardwareSerial Serial3(PC11, PC10);  // Rx=PC11, Tx=PC10 -- USART3 - F446RE
 HardwareSerial Serial5(PD2, PC12);  // Rx=PC7, Tx=PC6 -- UART5 - F446RE
 // On the F446RE, Serial4 and Serial6 also use pins we can't readily map while using the Arduino pins
-#elif defined(ARDUINO_NUCLEO_F412ZG) || defined(ARDUINO_NUCLEO_F413ZH) || defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F446ZE) 
+#elif defined(ARDUINO_NUCLEO_F412ZG) || defined(ARDUINO_NUCLEO_F413ZH) || defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F439ZI) || defined(ARDUINO_NUCLEO_F446ZE) 
 // Nucleo-144 boards don't have Serial1 defined by default
 HardwareSerial Serial6(PG9, PG14);  // Rx=PG9, Tx=PG14 -- USART6
 // Serial3 is defined to use USART3 by default, but is in fact used as the diag console
@@ -215,9 +215,9 @@ void DCCTimer::clearPWM() {
 }
 
 void   DCCTimer::getSimulatedMacAddress(byte mac[6]) {
-  volatile uint32_t *serno1 = (volatile uint32_t *)0x1FFF7A10;
+  volatile uint32_t *serno1 = (volatile uint32_t *)UID_BASE;
-  volatile uint32_t *serno2 = (volatile uint32_t *)0x1FFF7A14;
+  volatile uint32_t *serno2 = (volatile uint32_t *)UID_BASE+4;
-  // volatile uint32_t *serno3 = (volatile uint32_t *)0x1FFF7A18;
+  // volatile uint32_t *serno3 = (volatile uint32_t *)UID_BASE+8;
 
   volatile uint32_t m1 = *serno1;
   volatile uint32_t m2 = *serno2;

I2CManager_STM32.h

@@ -39,7 +39,8 @@
 #if defined(I2C_USE_INTERRUPTS) && defined(ARDUINO_ARCH_STM32)
 #if defined(ARDUINO_NUCLEO_F401RE) || defined(ARDUINO_NUCLEO_F411RE) || defined(ARDUINO_NUCLEO_F446RE) \
     || defined(ARDUINO_NUCLEO_F412ZG) || defined(ARDUINO_NUCLEO_F413ZH) \
-    || defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F446ZE)
+    || defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F439ZI) \
+    || defined(ARDUINO_NUCLEO_F446ZE)
 // Assume I2C1 for now - default I2C bus on Nucleo-F411RE and likely all Nucleo-64
 // and Nucleo-144 variants
 I2C_TypeDef *s = I2C1;

platformio.ini

@@ -261,18 +261,18 @@ upload_protocol = stlink
 ; Experimental - Ethernet work still in progress
 ; Commented out as the F439ZI also needs variant files
 ;
-; [env:Nucleo-F439ZI]
+[env:Nucleo-F439ZI]
-; platform = ststm32
+platform = ststm32
-; board = nucleo_f429zi
+board = nucleo_f429zi
-; framework = arduino
+framework = arduino
-; lib_deps = ${env.lib_deps}
+lib_deps = ${env.lib_deps}
-; 			arduino-libraries/Ethernet @ ^2.0.1
+			arduino-libraries/Ethernet @ ^2.0.1
-; 			stm32duino/STM32Ethernet @ ^1.3.0
+			stm32duino/STM32Ethernet @ ^1.3.0
-; 			stm32duino/STM32duino LwIP @ ^2.1.2
+			stm32duino/STM32duino LwIP @ ^2.1.2
-; build_flags = -std=c++17 -Os -g2 -Wunused-variable
+build_flags = -std=c++17 -Os -g2 -Wunused-variable
-; monitor_speed = 115200
+monitor_speed = 115200
-; monitor_echo = yes
+monitor_echo = yes
-; upload_protocol = stlink
+upload_protocol = stlink
 
 [env:Teensy3_2]
 platform = teensy