DCC.cpp

@@ -615,19 +615,6 @@ const ackOp FLASH SHORT_LOCO_ID_PROG[] = {
       CALLFAIL
 };
 
-// for CONSIST_ID_PROG the 20,19 values are already calculated
-const ackOp FLASH CONSIST_ID_PROG[] = {
-      BASELINE,
-      SETCV,(ackOp)20,
-      SETBYTEH,    // high byte to CV 20
-      WB,WACK,     // ignore dedcoder without cv20 support
-      SETCV,(ackOp)19,
-      SETBYTEL,   // low byte of word
-      WB,WACK,ITC1,   // If ACK, we are done - callback(1) means Ok
-      VB,WACK,ITC1,   // Some decoders do not ack and need verify
-      CALLFAIL
-};
-
 const ackOp FLASH LONG_LOCO_ID_PROG[] = {
       BASELINE,
       // Clear consist CV 19,20
@@ -702,26 +689,6 @@ void DCC::setLocoId(int id,ACK_CALLBACK callback) {
       DCCACK::Setup(id | 0xc000,LONG_LOCO_ID_PROG, callback);
 }
 
-void DCC::setConsistId(int id,bool reverse,ACK_CALLBACK callback) {
-  if (id<0 || id>10239) { //0x27FF according to standard
-    callback(-1);
-    return;
-  }
-  byte cv20;
-  byte cv19;
-
-  if (id<=HIGHEST_SHORT_ADDR) {
-    cv19=id;
-    cv20=0;
-  }
-  else {
-    cv20=id/100;
-    cv19=id%100;
-  }
-  if (reverse) cv19|=0x80;
-  DCCACK::Setup((cv20<<8)|cv19, CONSIST_ID_PROG, callback);
-}
-
 void DCC::forgetLoco(int cab) {  // removes any speed reminders for this loco
   setThrottle2(cab,1); // ESTOP this loco if still on track
   int reg=lookupSpeedTable(cab, false);

DCC.h

@@ -85,7 +85,7 @@ public:
 
   static void getLocoId(ACK_CALLBACK callback);
   static void setLocoId(int id,ACK_CALLBACK callback);
-  static void setConsistId(int id,bool reverse,ACK_CALLBACK callback);
+
   // Enhanced API functions
   static void forgetLoco(int cab); // removes any speed reminders for this loco
   static void forgetAllLocos();    // removes all speed reminders

DCCEXParser.cpp

@@ -458,9 +458,6 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
             DCC::setLocoId(p[0],callback_Wloco);
         else if (params == 4)  // WRITE CV ON PROG <W CV VALUE [CALLBACKNUM] [CALLBACKSUB]>
             DCC::writeCVByte(p[0], p[1], callback_W4);
-        else if ((params==2 || params==3 ) && p[0]=="CONSIST"_hk ) {
-            DCC::setConsistId(p[1],p[2]=="REVERSE"_hk,callback_Wconsist);
-        }    
         else if (params == 2)  // WRITE CV ON PROG <W CV VALUE>
             DCC::writeCVByte(p[0], p[1], callback_W);
 	else
@@ -1350,11 +1347,3 @@ void DCCEXParser::callback_Wloco(int16_t result)
     StringFormatter::send(getAsyncReplyStream(), F("<w %d>\n"), result);
     commitAsyncReplyStream();
 }
-
-void DCCEXParser::callback_Wconsist(int16_t result)
-{
-    if (result==1) result=stashP[1]; // pick up original requested id from command
-    StringFormatter::send(getAsyncReplyStream(), F("<w CONSIST %d%S>\n"),
-     result, stashP[2]=="REVERSE"_hk ? F(" REVERSE") : F(""));
-    commitAsyncReplyStream();
-}

DCCEXParser.h

@@ -71,7 +71,6 @@ struct DCCEXParser
     static void callback_R(int16_t result);
     static void callback_Rloco(int16_t result);
     static void callback_Wloco(int16_t result);
-    static void callback_Wconsist(int16_t result);
     static void callback_Vbit(int16_t result);
     static void callback_Vbyte(int16_t result);
     static FILTER_CALLBACK  filterCallback;

version.h

@@ -3,9 +3,7 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.46"
-// 5.2.46 - Support for extended consist CV20 in <R> and <W id>
-//        - New cmd <W CONSIST id [REVERSE]> to handle long/short consist ids
+#define VERSION "5.2.45"
 // 5.2.45 - ESP32 Trackmanager reset cab number to 0 when track is not DC
 //          ESP32 fix PWM LEDC inverted pin mode
 //          ESP32 rewrite PWM LEDC to use pin mux