CommandDistributor.cpp

@@ -248,11 +248,6 @@ void  CommandDistributor::broadcastLoco(byte slot) {
 }
 
 void  CommandDistributor::broadcastPower() {
-  char pstr[] = "? x";
-  for(byte t=0; t<TrackManager::MAX_TRACKS; t++)
-    if (TrackManager::getPower(t, pstr))
-      broadcastReply(COMMAND_TYPE, F("<p%s>\n"),pstr);
-
   bool main=TrackManager::getMainPower()==POWERMODE::ON;
   bool prog=TrackManager::getProgPower()==POWERMODE::ON;
   bool join=TrackManager::isJoined();

DCCEXParser.cpp

@@ -553,66 +553,131 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
 
     case '1': // POWERON <1   [MAIN|PROG|JOIN]>
         {
+            bool main=false;
+            bool prog=false;
+            bool join=false;
+            bool singletrack=false;
+            //byte t=0;
             if (params > 1) break;
             if (params==0) { // All
-	    TrackManager::setTrackPower(TRACK_MODE_ALL, POWERMODE::ON);
+                main=true;
+                prog=true;
             }
             if (params==1) {
                 if (p[0]==HASH_KEYWORD_MAIN) { // <1 MAIN>
-	      TrackManager::setTrackPower(TRACK_MODE_MAIN, POWERMODE::ON);
+                        main=true;
             }
 #ifndef DISABLE_PROG
             else if (p[0] == HASH_KEYWORD_JOIN) {  // <1 JOIN>
-	      TrackManager::setJoin(true);
+                main=true;
-	      TrackManager::setTrackPower(TRACK_MODE_MAIN|TRACK_MODE_PROG, POWERMODE::ON);
+                prog=true;
+                join=true;
             }
             else if (p[0]==HASH_KEYWORD_PROG) { // <1 PROG>
-	      TrackManager::setJoin(false);
+                prog=true;
-	      TrackManager::setTrackPower(TRACK_MODE_PROG, POWERMODE::ON);
             }
 #endif
+            //else if (p[0] >= 'A' && p[0] <= 'H') { // <1 A-H>
             else if (p[0] >= HASH_KEYWORD_A && p[0] <= HASH_KEYWORD_H) { // <1 A-H>
                 byte t = (p[0] - 'A');
-	      TrackManager::setTrackPower(POWERMODE::ON, t);
+                    //DIAG(F("Processing track - %d "), t);
-	      //StringFormatter::send(stream, F("<p1 %c>\n"), t+'A');
+                    if (TrackManager::isProg(t)) {
+                        main = false;
+                        prog = true;
                     }
+                    else
+                    {
+                        main=true;
+                        prog=false;
+                    }
+                singletrack=true;
+                if (main) TrackManager::setTrackPower(false, false, POWERMODE::ON, t);
+                if (prog) TrackManager::setTrackPower(true, false, POWERMODE::ON, t);
+                
+                StringFormatter::send(stream, F("<1 %c>\n"), t+'A');
+                //CommandDistributor::broadcastPower();
+                //TrackManager::streamTrackState(NULL,t);
+                return;
+            }
+
 	    else break; // will reply <X>
 	    }
+
+        if (!singletrack) {
+            TrackManager::setJoin(join);
+            if (join) TrackManager::setJoinPower(POWERMODE::ON);
+            else {
+                if (main) TrackManager::setMainPower(POWERMODE::ON);
+                if (prog) TrackManager::setProgPower(POWERMODE::ON);
+            }
             CommandDistributor::broadcastPower();
-	  //TrackManager::streamTrackState(NULL,t);
           
             return;
             }
             
+        }
+
     case '0': // POWEROFF <0 [MAIN | PROG] >
         {
+            bool main=false;
+            bool prog=false;
+            bool singletrack=false;
+            //byte t=0;
             if (params > 1) break;
             if (params==0) { // All
-	    TrackManager::setJoin(false);
+                main=true;
-	    TrackManager::setTrackPower(TRACK_MODE_ALL, POWERMODE::OFF);
+                prog=true;
             }
             if (params==1) {
                 if (p[0]==HASH_KEYWORD_MAIN) { // <0 MAIN>
-	      TrackManager::setJoin(false);
+                    main=true;
-	      TrackManager::setTrackPower(TRACK_MODE_MAIN, POWERMODE::OFF);
             }
 #ifndef DISABLE_PROG
             else if (p[0]==HASH_KEYWORD_PROG) { // <0 PROG>
-	      TrackManager::progTrackBoosted=false;  // Prog track boost mode will not outlive prog track off
+                prog=true;
-	      TrackManager::setTrackPower(TRACK_MODE_PROG, POWERMODE::OFF);
             }
 #endif
+            //else if (p[0] >= 'A' && p[0] <= 'H') { // <1 A-H>
              else if (p[0] >= HASH_KEYWORD_A && p[0] <= HASH_KEYWORD_H) { // <1 A-H>
                 byte t = (p[0] - 'A');
-	      TrackManager::setJoin(false);
+                //DIAG(F("Processing track - %d "), t);
-	      TrackManager::setTrackPower(POWERMODE::OFF, t);
+                if (TrackManager::isProg(t)) {
-	      //StringFormatter::send(stream, F("<p0 %c>\n"), t+'A');
+                    main = false;
+                    prog = true;
                 }
+                else
+                {
+                    main=true;
+                    prog=false;
+                }
+                singletrack=true;  
+                TrackManager::setJoin(false);
+                if (main) TrackManager::setTrackPower(false, false, POWERMODE::OFF, t);
+                if (prog) {
+                    TrackManager::progTrackBoosted=false;  // Prog track boost mode will not outlive prog track off
+                    TrackManager::setTrackPower(true, false, POWERMODE::OFF, t);                 
+                }   
+                StringFormatter::send(stream, F("<0 %c>\n"), t+'A');
+                //CommandDistributor::broadcastPower();
+                //TrackManager::streamTrackState(NULL, t);
+                return;
+            }    
+
 	    else break; // will reply <X>
 	    }
+
+        if (!singletrack) {
+            TrackManager::setJoin(false);
+            
+            if (main) TrackManager::setMainPower(POWERMODE::OFF);
+            if (prog) {
+                    TrackManager::progTrackBoosted=false;  // Prog track boost mode will not outlive prog track off
+                    TrackManager::setProgPower(POWERMODE::OFF);
+                }
             CommandDistributor::broadcastPower();
             return;
         }
+    }
 
     case '!': // ESTOP ALL  <!>
         DCC::setThrottle(0,1,1); // this broadcasts speed 1(estop) and sets all reminders to speed 1.

EXRAIL2.cpp

@@ -636,10 +636,10 @@ void RMFT2::loop2() {
         //byte thistrack=getOperand(1);
         switch (operand) {
           case TRACK_POWER_0:
-            TrackManager::setTrackPower(POWERMODE::OFF, getOperand(1));
+            TrackManager::setTrackPower(TrackManager::isProg(getOperand(1)), false, POWERMODE::OFF, getOperand(1));
           break;
           case TRACK_POWER_1:
-            TrackManager::setTrackPower(POWERMODE::ON, getOperand(1));
+            TrackManager::setTrackPower(TrackManager::isProg(getOperand(1)), false, POWERMODE::ON, getOperand(1));
           break;
         }
 
@@ -650,7 +650,7 @@ void RMFT2::loop2() {
       // If DC/DCX use  my loco for DC address 
       {
         TRACK_MODE mode = (TRACK_MODE)(operand>>8);
-        int16_t cab=(mode & TRACK_MODE_DC) ? loco : 0;
+        int16_t cab=(mode==TRACK_MODE_DC || mode==TRACK_MODE_DCX) ? loco : 0;
         TrackManager::setTrackMode(operand & 0x0F, mode, cab);
       }
       break; 

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202311141013Z"
+#define GITHUB_SHA "devel-202310230944Z"

MotorDriver.cpp

@@ -605,10 +605,6 @@ void MotorDriver::checkPowerOverload(bool useProgLimit, byte trackno) {
 	DIAG(F("TRACK %c ALERT FAULT"), trackno + 'A');
       }
       setPower(POWERMODE::ALERT);
-      if ((trackMode & TRACK_MODE_AUTOINV) && (trackMode & (TRACK_MODE_MAIN|TRACK_MODE_EXT|TRACK_MODE_BOOST))){
-	DIAG(F("TRACK %c INVERT"), trackno + 'A');
-	invertOutput();
-      }
       break;
     }
     // all well

MotorDriver.h

@@ -3,7 +3,7 @@
  *  © 2021 Mike S
  *  © 2021 Fred Decker
  *  © 2020 Chris Harlow
- *  © 2022,2023 Harald Barth
+ *  © 2022 Harald Barth
  *  All rights reserved.
  *  
  *  This file is part of CommandStation-EX
@@ -28,15 +28,8 @@
 #include "DCCTimer.h"
 
 // use powers of two so we can do logical and/or on the track modes in if clauses.
-// RACK_MODE_DCX is (TRACK_MODE_DC|TRACK_MODE_INV)
-template<class T> inline T operator~ (T a) { return (T)~(int)a; }
-template<class T> inline T operator| (T a, T b) { return (T)((int)a | (int)b); }
-template<class T> inline T operator& (T a, T b) { return (T)((int)a & (int)b); }
-template<class T> inline T operator^ (T a, T b) { return (T)((int)a ^ (int)b); }
 enum TRACK_MODE : byte {TRACK_MODE_NONE = 1, TRACK_MODE_MAIN = 2, TRACK_MODE_PROG = 4,
-                        TRACK_MODE_DC = 8, TRACK_MODE_EXT = 16, TRACK_MODE_BOOST = 32,
+                        TRACK_MODE_DC = 8, TRACK_MODE_DCX = 16, TRACK_MODE_EXT = 32};
-                        TRACK_MODE_ALL = 62, // only to operate all tracks
-                        TRACK_MODE_INV = 64, TRACK_MODE_DCX = 72 /*DC + INV*/, TRACK_MODE_AUTOINV = 128};
 
 #define setHIGH(fastpin)  *fastpin.inout |= fastpin.maskHIGH
 #define setLOW(fastpin)   *fastpin.inout &= fastpin.maskLOW
@@ -156,8 +149,6 @@ class MotorDriver {
     // from outside interrupt
     void setBrake( bool on, bool interruptContext=false);
   __attribute__((always_inline)) inline void setSignal( bool high) {
-      if (invertPhase)
-	high = !high;
       if (trackPWM) {
 	DCCTimer::setPWM(signalPin,high);
       }
@@ -177,12 +168,6 @@ class MotorDriver {
 	pinMode(signalPin, OUTPUT);
       else
 	pinMode(signalPin, INPUT);
-      if (signalPin2 != UNUSED_PIN) {
-	if (on)
-	  pinMode(signalPin2, OUTPUT);
-	else
-	  pinMode(signalPin2, INPUT);
-      }
     };
     inline pinpair getSignalPin() { return pinpair(signalPin,signalPin2); };
     void setDCSignal(byte speedByte);
@@ -247,32 +232,6 @@ class MotorDriver {
 #endif
   inline void setMode(TRACK_MODE m) {
     trackMode = m;
-    invertOutput(trackMode & TRACK_MODE_INV);
-  };
-  inline void invertOutput() {               // toggles output inversion
-    invertPhase = !invertPhase;
-    invertOutput(invertPhase);
-  };
-  inline void invertOutput(bool b) {         // sets output inverted or not
-    if (b)
-      invertPhase = 1;
-    else
-      invertPhase = 0;
-#if defined(ARDUINO_ARCH_ESP32)
-    pinpair p = getSignalPin();
-    uint32_t *outreg = (uint32_t *)(GPIO_FUNC0_OUT_SEL_CFG_REG + 4*p.pin);
-    if (invertPhase) // set or clear the invert bit in the gpio out register
-      *outreg |=  ((uint32_t)0x1 << GPIO_FUNC0_OUT_INV_SEL_S);
-    else
-      *outreg &= ~((uint32_t)0x1 << GPIO_FUNC0_OUT_INV_SEL_S);
-    if (p.invpin != UNUSED_PIN) {
-      outreg = (uint32_t *)(GPIO_FUNC0_OUT_SEL_CFG_REG + 4*p.invpin);
-      if (invertPhase) // clear or set the invert bit in the gpio out register
-	*outreg &= ~((uint32_t)0x1 << GPIO_FUNC0_OUT_INV_SEL_S);
-      else
-	*outreg |=  ((uint32_t)0x1 << GPIO_FUNC0_OUT_INV_SEL_S);
-    }
-#endif
   };
   inline TRACK_MODE getMode() {
     return trackMode;
@@ -304,7 +263,7 @@ class MotorDriver {
     bool invertBrake;       // brake pin passed as negative means pin is inverted
     bool invertPower;       // power pin passed as negative means pin is inverted
     bool invertFault;       // fault pin passed as negative means pin is inverted
-    bool invertPhase = 0;   // phase of out pin is inverted
+    
     // Raw to milliamp conversion factors avoiding float data types.
     // Milliamps=rawADCreading * sensefactorInternal / senseScale
     //

TrackManager.cpp

@@ -1,6 +1,6 @@
 /*
  *  © 2022 Chris Harlow
- *  © 2022,2023 Harald Barth
+ *  © 2022 Harald Barth
  *  © 2023 Colin Murdoch
  *  All rights reserved.
  *  
@@ -45,11 +45,6 @@ const int16_t HASH_KEYWORD_DC = 2183;
 const int16_t HASH_KEYWORD_DCX = 6463; // DC reversed polarity 
 const int16_t HASH_KEYWORD_EXT = 8201; // External DCC signal
 const int16_t HASH_KEYWORD_A = 65; // parser makes single chars the ascii.   
-const int16_t HASH_KEYWORD_AUTO = -5457;
-#ifdef BOOSTER_INPUT
-const int16_t HASH_KEYWORD_BOOST = 11269;
-#endif
-const int16_t HASH_KEYWORD_INV = 11857;
 
 MotorDriver * TrackManager::track[MAX_TRACKS];
 int16_t TrackManager::trackDCAddr[MAX_TRACKS];
@@ -92,7 +87,7 @@ void TrackManager::sampleCurrent() {
   if (!waiting) {
     // look for a valid track to sample or until we are around
     while (true) {
-      if (track[tr]->getMode() & ( TRACK_MODE_MAIN|TRACK_MODE_PROG|TRACK_MODE_DC|TRACK_MODE_BOOST|TRACK_MODE_EXT )) {
+      if (track[tr]->getMode() & ( TRACK_MODE_MAIN|TRACK_MODE_PROG|TRACK_MODE_DC|TRACK_MODE_DCX|TRACK_MODE_EXT )) {
 	track[tr]->startCurrentFromHW();
 	// for scope debug track[1]->setBrake(1);
 	waiting = true;
@@ -202,8 +197,8 @@ void TrackManager::setPROGSignal( bool on) {
 void TrackManager::setDCSignal(int16_t cab, byte speedbyte) {
   FOR_EACH_TRACK(t) {
     if (trackDCAddr[t]!=cab && cab != 0) continue;
-    if (track[t]->getMode() & TRACK_MODE_DC)
+    if (track[t]->getMode()==TRACK_MODE_DC) track[t]->setDCSignal(speedbyte);
-      track[t]->setDCSignal(speedbyte);
+    else if (track[t]->getMode()==TRACK_MODE_DCX) track[t]->setDCSignal(speedbyte ^ 128);
   }
 }    
 
@@ -212,7 +207,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 
     //DIAG(F("Track=%c Mode=%d"),trackToSet+'A', mode);
     // DC tracks require a motorDriver that can set brake!
-    if (mode & TRACK_MODE_DC) {
+    if (mode==TRACK_MODE_DC || mode==TRACK_MODE_DCX) {
 #if defined(ARDUINO_AVR_UNO)
       DIAG(F("Uno has no PWM timers available for DC"));
       return false;
@@ -228,37 +223,21 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
     pinpair p = track[trackToSet]->getSignalPin();
     //DIAG(F("Track=%c remove  pin %d"),trackToSet+'A', p.pin);
     gpio_reset_pin((gpio_num_t)p.pin);
+    pinMode(p.pin, OUTPUT); // gpio_reset_pin may reset to input
     if (p.invpin != UNUSED_PIN) {
       //DIAG(F("Track=%c remove ^pin %d"),trackToSet+'A', p.invpin);
       gpio_reset_pin((gpio_num_t)p.invpin);
+      pinMode(p.invpin, OUTPUT); // gpio_reset_pin may reset to input
     }
-#ifdef BOOSTER_INPUT
-    if (mode & TRACK_MODE_BOOST) {
-      //DIAG(F("Track=%c mode boost pin %d"),trackToSet+'A', p.pin);
-      pinMode(BOOSTER_INPUT, INPUT);
-      gpio_matrix_in(26, SIG_IN_FUNC228_IDX, false); //pads 224 to 228 available as loopback
-      gpio_matrix_out(p.pin, SIG_IN_FUNC228_IDX, false, false);
-      if (p.invpin != UNUSED_PIN) {
-	gpio_matrix_out(p.invpin, SIG_IN_FUNC228_IDX, true /*inverted*/, false);
-      }
-    } else // elseif clause continues
-#endif
-    if (mode & (TRACK_MODE_MAIN | TRACK_MODE_PROG | TRACK_MODE_DC)) {
-      // gpio_reset_pin may reset to input
-      pinMode(p.pin, OUTPUT);
-      if (p.invpin != UNUSED_PIN)
-	pinMode(p.invpin, OUTPUT);
-    }
-
 #endif
 #ifndef DISABLE_PROG
-    if (mode & TRACK_MODE_PROG) {
+    if (mode==TRACK_MODE_PROG) {
 #else
     if (false) {
 #endif
       // only allow 1 track to be prog
       FOR_EACH_TRACK(t)
-	if ( (track[t]->getMode() & TRACK_MODE_PROG) && t != trackToSet) {
+	if (track[t]->getMode()==TRACK_MODE_PROG && t != trackToSet) {
 	  track[t]->setPower(POWERMODE::OFF);
 	  track[t]->setMode(TRACK_MODE_NONE);
 	  track[t]->makeProgTrack(false);     // revoke prog track special handling
@@ -276,20 +255,16 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
     // state, otherwise trains run away or just dont move.
 
     // This can be done BEFORE the PWM-Timer evaluation (methinks)
-    if (!(mode & TRACK_MODE_DC)) {
+    if (!(mode==TRACK_MODE_DC || mode==TRACK_MODE_DCX)) {
       // DCC tracks need to have set the PWM to zero or they will not work.
       track[trackToSet]->detachDCSignal();
       track[trackToSet]->setBrake(false);
     }
 
-    // BOOST:
-    //  Leave it as is
-    // otherwise:
     // EXT is a special case where the signal pin is
     // turned off. So unless that is set, the signal
     // pin should be turned on
-    if (!(mode & TRACK_MODE_BOOST))
+    track[trackToSet]->enableSignal(mode != TRACK_MODE_EXT);
-      track[trackToSet]->enableSignal(!(mode & TRACK_MODE_EXT));
 
 #ifndef ARDUINO_ARCH_ESP32
     // re-evaluate HighAccuracy mode
@@ -299,7 +274,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
       // DC tracks must not have the DCC PWM switched on
       // so we globally turn it off if one of the PWM
       // capable tracks is now DC or DCX.
-      if (track[t]->getMode() & TRACK_MODE_DC) {
+      if (track[t]->getMode()==TRACK_MODE_DC || track[t]->getMode()==TRACK_MODE_DCX) {
 	if (track[t]->isPWMCapable()) {
 	  canDo=false;    // this track is capable but can not run PWM
 	  break;          // in this mode, so abort and prevent globally below
@@ -307,7 +282,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 	  track[t]->trackPWM=false; // this track sure can not run with PWM
 	  //DIAG(F("Track %c trackPWM 0 (not capable)"), t+'A');
 	}
-      } else if (track[t]->getMode() & (TRACK_MODE_MAIN |TRACK_MODE_PROG)) {
+      } else if (track[t]->getMode()==TRACK_MODE_MAIN || track[t]->getMode()==TRACK_MODE_PROG) {
 	track[t]->trackPWM = track[t]->isPWMCapable(); // trackPWM is still a guess here
 	//DIAG(F("Track %c trackPWM %d"), t+'A', track[t]->trackPWM);
 	canDo &= track[t]->trackPWM;
@@ -325,12 +300,10 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 #else
     // For ESP32 we just reinitialize the DCC Waveform
     DCCWaveform::begin();
-    // setMode() again AFTER Waveform::begin() of ESP32 fixes INVERTED signal
-    track[trackToSet]->setMode(mode);
 #endif
 
     // This block must be AFTER the PWM-Timer modifications
-    if (mode & TRACK_MODE_DC) {
+    if (mode==TRACK_MODE_DC || mode==TRACK_MODE_DCX) {
         // DC tracks need to be given speed of the throttle for that cab address
         // otherwise will not match other tracks on same cab.
         // This also needs to allow for inverted DCX
@@ -339,7 +312,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 
     // Normal running tracks are set to the global power state 
     track[trackToSet]->setPower(
-      (mode & (TRACK_MODE_MAIN | TRACK_MODE_DC | TRACK_MODE_EXT | TRACK_MODE_BOOST)) ?
+        (mode==TRACK_MODE_MAIN || mode==TRACK_MODE_DC || mode==TRACK_MODE_DCX || mode==TRACK_MODE_EXT) ?
         mainPowerGuess : POWERMODE::OFF);
     //DIAG(F("TrackMode=%d"),mode);
     return true; 
@@ -347,6 +320,8 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 
 void TrackManager::applyDCSpeed(byte t) {
   uint8_t speedByte=DCC::getThrottleSpeedByte(trackDCAddr[t]);
+  if (track[t]->getMode()==TRACK_MODE_DCX)
+    speedByte = speedByte ^ 128; // reverse direction bit
   track[t]->setDCSignal(speedByte);
 }
 
@@ -378,21 +353,12 @@ bool TrackManager::parseJ(Print *stream, int16_t params, int16_t p[])
 
     if (params==2  && p[1]==HASH_KEYWORD_EXT) // <= id EXT>
         return setTrackMode(p[0],TRACK_MODE_EXT);
-#ifdef BOOSTER_INPUT
-    if (params==2  && p[1]==HASH_KEYWORD_BOOST) // <= id BOOST>
-        return setTrackMode(p[0],TRACK_MODE_BOOST);
-#endif
-    if (params==2  && p[1]==HASH_KEYWORD_AUTO) // <= id AUTO>
-      return setTrackMode(p[0], track[p[0]]->getMode() | TRACK_MODE_AUTOINV);
-
-    if (params==2  && p[1]==HASH_KEYWORD_INV) // <= id AUTO>
-      return setTrackMode(p[0], track[p[0]]->getMode() | TRACK_MODE_INV);
 
     if (params==3  && p[1]==HASH_KEYWORD_DC && p[2]>0) // <= id DC cab>
         return setTrackMode(p[0],TRACK_MODE_DC,p[2]);
     
     if (params==3  && p[1]==HASH_KEYWORD_DCX && p[2]>0) // <= id DCX cab>
-        return setTrackMode(p[0],TRACK_MODE_DC|TRACK_MODE_INV,p[2]);
+        return setTrackMode(p[0],TRACK_MODE_DCX,p[2]);
 
     return false;
 }
@@ -400,43 +366,36 @@ bool TrackManager::parseJ(Print *stream, int16_t params, int16_t p[])
 void TrackManager::streamTrackState(Print* stream, byte t) {
   // null stream means send to commandDistributor for broadcast
   if (track[t]==NULL) return;
-  auto format=F("<= %d XXX>\n");
+  auto format=F("");
-  TRACK_MODE tm = track[t]->getMode();
+  bool pstate = TrackManager::isPowerOn(t);
-  if (tm & TRACK_MODE_MAIN) {
+  
-    if(tm & TRACK_MODE_AUTOINV)
+  switch(track[t]->getMode()) {
-      format=F("<= %c MAIN A>\n");
+  case TRACK_MODE_MAIN:
-    else if (tm & TRACK_MODE_INV)
+      if (pstate) {format=F("<= %c MAIN ON>\n");} else {format = F("<= %c MAIN OFF>\n");}
-      format=F("<= %c MAIN I>\n");
+      break;
-    else
-      format=F("<= %c MAIN>\n");
-  }
 #ifndef DISABLE_PROG
-  else if (tm & TRACK_MODE_PROG)
+  case TRACK_MODE_PROG:
-    format=F("<= %c PROG>\n");
+      if (pstate) {format=F("<= %c PROG ON>\n");} else {format=F("<= %c PROG OFF>\n");}
+      break;
 #endif
-  else if (tm & TRACK_MODE_NONE)
+  case TRACK_MODE_NONE:
-    format=F("<= %c NONE>\n");
+      if (pstate) {format=F("<= %c NONE ON>\n");} else {format=F("<= %c NONE OFF>\n");}
-  else if(tm & TRACK_MODE_EXT)
+      break;
-    format=F("<= %c EXT>\n");
+  case TRACK_MODE_EXT:
-  else if(tm & TRACK_MODE_BOOST) {
+      if (pstate) {format=F("<= %c EXT ON>\n");} else {format=F("<= %c EXT OFF>\n");}
-        if(tm & TRACK_MODE_AUTOINV)
+      break;
-      format=F("<= %c B A>\n");
+  case TRACK_MODE_DC:
-    else if (tm & TRACK_MODE_INV)
+      if (pstate) {format=F("<= %c DC %d ON>\n");} else {format=F("<= %c DC %d OFF>\n");}
-      format=F("<= %c B I>\n");
+      break;
-    else
+  case TRACK_MODE_DCX:
-      format=F("<= %c B>\n");
+      if (pstate) {format=F("<= %c DCX %d ON>\n");} else {format=F("<= %c DCX %d OFF>\n");}
-  }
+      break;
-  else if (tm & TRACK_MODE_DC) {
+  default:
-    if (tm & TRACK_MODE_INV)
+      break; // unknown, dont care    
-      format=F("<= %c DCX %d>\n");
-    else
-      format=F("<= %c DC %d>\n");
   }
 
-  if (stream)
+  if (stream) StringFormatter::send(stream,format,'A'+t, trackDCAddr[t]);   
-    StringFormatter::send(stream,format,'A'+t, trackDCAddr[t]);
+    else CommandDistributor::broadcastTrackState(format,'A'+t, trackDCAddr[t]);
-  else
-    CommandDistributor::broadcastTrackState(format,'A'+t, trackDCAddr[t]);
   
 }
 
@@ -452,13 +411,13 @@ void TrackManager::loop() {
     if (nextCycleTrack>lastTrack) nextCycleTrack=0;
     if (track[nextCycleTrack]==NULL) return;
     MotorDriver * motorDriver=track[nextCycleTrack];
-    bool useProgLimit=dontLimitProg ? false : (bool)(track[nextCycleTrack]->getMode() & TRACK_MODE_PROG);
+    bool useProgLimit=dontLimitProg? false: track[nextCycleTrack]->getMode()==TRACK_MODE_PROG;
     motorDriver->checkPowerOverload(useProgLimit, nextCycleTrack);   
 }
 
 MotorDriver * TrackManager::getProgDriver() {
     FOR_EACH_TRACK(t)
-      if (track[t]->getMode() & TRACK_MODE_PROG) return track[t];
+      if (track[t]->getMode()==TRACK_MODE_PROG) return track[t];
     return NULL;
 } 
 
@@ -466,50 +425,60 @@ MotorDriver * TrackManager::getProgDriver() {
 std::vector<MotorDriver *>TrackManager::getMainDrivers() {
   std::vector<MotorDriver *>  v;
   FOR_EACH_TRACK(t)
-    if (track[t]->getMode() & TRACK_MODE_MAIN) v.push_back(track[t]);
+    if (track[t]->getMode()==TRACK_MODE_MAIN) v.push_back(track[t]);
   return v;
 }
 #endif
 
-// Set track power for all tracks with this mode
+void TrackManager::setPower2(bool setProg,bool setJoin, POWERMODE mode) {
-void TrackManager::setTrackPower(TRACK_MODE trackmode, POWERMODE powermode) {
+    if (!setProg) mainPowerGuess=mode; 
     FOR_EACH_TRACK(t) {
-    MotorDriver *driver=track[t]; 
+
-    if (trackmode & driver->getMode()) {
+      TrackManager::setTrackPower(setProg, setJoin, mode, t);
-      if (powermode == POWERMODE::ON) {
+      
-	if (trackmode & TRACK_MODE_DC) {
-	  driver->setBrake(true);   // DC starts with brake on
-	  applyDCSpeed(t);          // speed match DCC throttles
-	} else {
-	  // toggle brake before turning power on - resets overcurrent error
-	  // on the Pololu board if brake is wired to ^D2.
-	  driver->setBrake(true);
-	  driver->setBrake(false); // DCC runs with brake off
-	}
-      }
-      driver->setPower(powermode);
-    }
     }
+    return;
 }
 
-// Set track power for this track, inependent of mode
+void TrackManager::setTrackPower(bool setProg, bool setJoin, POWERMODE mode, byte thistrack) {
-void TrackManager::setTrackPower(POWERMODE powermode, byte t) {
+
-  MotorDriver *driver=track[t]; 
+      //DIAG(F("SetTrackPower Processing Track %d"), thistrack);
-  TRACK_MODE trackmode = driver->getMode();
+      MotorDriver * driver=track[thistrack]; 
-  if (trackmode & TRACK_MODE_DC) {
+      if (!driver) return; 
-    if (powermode == POWERMODE::ON) {
+
-      driver->setBrake(true);   // DC starts with brake on
+      switch (track[thistrack]->getMode()) {
-      applyDCSpeed(t);          // speed match DCC throttles
+          case TRACK_MODE_MAIN:
-    }
+              if (setProg) break; 
-  } else {
-    if (powermode == POWERMODE::ON) {
               // toggle brake before turning power on - resets overcurrent error
               // on the Pololu board if brake is wired to ^D2.
+              // XXX see if we can make this conditional
               driver->setBrake(true);
               driver->setBrake(false); // DCC runs with brake off
+              driver->setPower(mode);  
+              break; 
+          case TRACK_MODE_DC:
+          case TRACK_MODE_DCX:
+              //DIAG(F("Processing track - %d setProg %d"), thistrack, setProg);
+              if (setProg || setJoin)  break; 
+              driver->setBrake(true); // DC starts with brake on
+              applyDCSpeed(thistrack);        // speed match DCC throttles
+              driver->setPower(mode);
+              break;  
+          case TRACK_MODE_PROG:
+              if (!setProg && !setJoin) break; 
+              driver->setBrake(true);
+              driver->setBrake(false);
+              driver->setPower(mode);
+              break;  
+          case TRACK_MODE_EXT:
+              driver->setBrake(true);
+              driver->setBrake(false);
+              driver->setPower(mode);
+        break;
+          case TRACK_MODE_NONE:
+              break;
         }
-  }
+
-  driver->setPower(powermode);
  }
 
  void TrackManager::reportPowerChange(Print* stream, byte thistrack) {
@@ -521,41 +490,13 @@ void TrackManager::reportPowerChange(Print* stream, byte thistrack) {
             track[0]->raw2mA(track[0]->getCurrentRaw(false)), maxCurrent, maxCurrent);                  
 }
 
-// returns state of the one and only prog track
 POWERMODE TrackManager::getProgPower() {
     FOR_EACH_TRACK(t)
-    if (track[t]->getMode() & TRACK_MODE_PROG)
+      if (track[t]->getMode()==TRACK_MODE_PROG) 
-      return track[t]->getPower(); // optimize: there is max one prog track
+	  return track[t]->getPower();
     return POWERMODE::OFF;   
   }
 
-// returns on if all are on. returns off otherwise
-POWERMODE TrackManager::getMainPower() {
-  POWERMODE result = POWERMODE::OFF;
-  FOR_EACH_TRACK(t) {
-    if (track[t]->getMode() & TRACK_MODE_MAIN) {
-      POWERMODE p = track[t]->getPower();
-      if (p == POWERMODE::OFF)
-	return POWERMODE::OFF; // done and out
-      if (p == POWERMODE::ON)
-	result = POWERMODE::ON;
-    }
-  }
-  return result;
-}
-
-bool TrackManager::getPower(byte t, char s[]) {
-  if (t > lastTrack)
-    return false;
-  if (track[t]) {
-    s[0] = track[t]->getPower() == POWERMODE::ON ? '1' : '0';
-    s[2] = t + 'A';
-    return true;
-  }
-  return false;
-}
-
-
 void TrackManager::reportObsoleteCurrent(Print* stream) {
   // This function is for backward JMRI compatibility only
   // It reports the first track only, as main, regardless of track settings.
@@ -596,7 +537,7 @@ void TrackManager::setJoin(bool joined) {
 #ifdef ARDUINO_ARCH_ESP32
   if (joined) {
     FOR_EACH_TRACK(t) {
-      if (track[t]->getMode() & TRACK_MODE_PROG) {
+      if (track[t]->getMode()==TRACK_MODE_PROG) {
 	tempProgTrack = t;
 	setTrackMode(t, TRACK_MODE_MAIN);
 	break;
@@ -625,7 +566,7 @@ bool TrackManager::isPowerOn(byte t) {
   }
 
 bool TrackManager::isProg(byte t) {
-    if (track[t]->getMode() & TRACK_MODE_PROG)
+    if (track[t]->getMode()==TRACK_MODE_PROG)
         return true;
     return false;
 }

TrackManager.h

@@ -65,19 +65,20 @@ class TrackManager {
   static std::vector<MotorDriver *>getMainDrivers();
 #endif
   
+    static void setPower2(bool progTrack,bool joinTrack,POWERMODE mode);
     static void setPower(POWERMODE mode) {setMainPower(mode); setProgPower(mode);}
-    static void setTrackPower(POWERMODE mode, byte t);
+    static void setMainPower(POWERMODE mode) {setPower2(false,false,mode);}
-    static void setTrackPower(TRACK_MODE trackmode, POWERMODE powermode);
+    static void setProgPower(POWERMODE mode) {setPower2(true,false,mode);}
-    static void setMainPower(POWERMODE mode) {setTrackPower(TRACK_MODE_MAIN, mode);}
+    static void setJoinPower(POWERMODE mode) {setPower2(false,true,mode);}
-    static void setProgPower(POWERMODE mode) {setTrackPower(TRACK_MODE_PROG, mode);}
+    static void setTrackPower(bool setProg, bool setJoin, POWERMODE mode, byte thistrack);
+   
 
     static const int16_t MAX_TRACKS=8;
     static bool setTrackMode(byte track, TRACK_MODE mode, int16_t DCaddr=0);
     static bool parseJ(Print * stream,  int16_t params, int16_t p[]);
     static void loop();
-    static POWERMODE getMainPower();
+    static POWERMODE getMainPower() {return mainPowerGuess;}
     static POWERMODE getProgPower();
-    static bool getPower(byte t, char s[]);
     static void setJoin(bool join);
     static bool isJoined() { return progTrackSyncMain;}
     static void setJoinRelayPin(byte joinRelayPin);
@@ -111,7 +112,7 @@ class TrackManager {
     static POWERMODE mainPowerGuess;
     static void applyDCSpeed(byte t);
 
-    static int16_t trackDCAddr[MAX_TRACKS];  // dc address if TRACK_MODE_DC
+    static int16_t trackDCAddr[MAX_TRACKS];  // dc address if TRACK_MODE_DC or TRACK_MODE_DCX
 #ifdef ARDUINO_ARCH_ESP32
     static byte tempProgTrack; // holds the prog track number during join
 #endif

config.example.h

@@ -266,12 +266,6 @@ The configuration file for DCC-EX Command Station
 //
 //#define SERIAL_BT_COMMANDS
 
-// BOOSTER PIN INPUT ON ESP32
-// On ESP32 you have the possibility to define a pin as booster input
-// Arduio pin D2 is GPIO 26 on ESPDuino32
-//
-//#define BOOSTER_INPUT 26
-
 // SABERTOOTH
 //
 // This is a very special option and only useful if you happen to have a

version.h

@@ -3,9 +3,7 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.1"
+#define VERSION "5.1.21"
-// 5.2.1  - Trackmanager rework for simpler structure
-// 5.2.0  - ESP32: Autoreverse and booster mode support
 // 5.1.21 - EXRAIL invoke multiple ON handlers for same event
 // 5.1.20 - EXRAIL Tidy and ROUTE_STATE, ROUTE_CAPTION 
 // 5.1.19 - Only flag 2.2.0.0-dev as broken, not 2.2.0.0