DCC.cpp

@@ -153,21 +153,6 @@ uint8_t DCC::getThrottleSpeedByte(int cab) {
   return speedTable[reg].speedCode;
 }
 
-// returns 0 to 3 for frequency
-uint8_t DCC::getThrottleFrequency(int cab) {
-#if defined(ARDUINO_AVR_UNO)
-  (void)cab;
-  return 0;
-#else
-  int reg=lookupSpeedTable(cab);
-  if (reg<0)
-    return 0; // use default frequency 
-  uint8_t res = (uint8_t)(speedTable[reg].functions >>30);
-  DIAG(F("Speed table %d functions %l shifted %d"), reg, speedTable[reg].functions, res);
-  return res; // shift out first 29 bits so we have the "frequency bits" left
-#endif
-}
-
 // returns direction on loco
 // or true/forward on "loco not found"
 bool DCC::getThrottleDirection(int cab) {
@@ -198,25 +183,22 @@ bool DCC::setFn( int cab, int16_t functionNumber, bool on) {
        b[nB++] = functionNumber >>7 ;  // high order bits
     }
     DCCWaveform::mainTrack.schedulePacket(b, nB, 4);
-  }
-  // We use the reminder table up to 28 for normal functions.
-  // We use 29 to 31 for DC frequency as well.
-  if (functionNumber > 31)
     return true;
-  
+  }
+
   int reg = lookupSpeedTable(cab);
   if (reg<0) return false;
 
   // Take care of functions:
   // Set state of function
-  uint32_t previous=speedTable[reg].functions;
+  unsigned long previous=speedTable[reg].functions;
-  uint32_t funcmask = (1UL<<functionNumber);
+  unsigned long funcmask = (1UL<<functionNumber);
   if (on) {
       speedTable[reg].functions |= funcmask;
   } else {
       speedTable[reg].functions &= ~funcmask;
   }
-  if (speedTable[reg].functions != previous && functionNumber > 28) {
+  if (speedTable[reg].functions != previous) {
     updateGroupflags(speedTable[reg].groupFlags, functionNumber);
     CommandDistributor::broadcastLoco(reg);
   }

DCC.h

@@ -61,7 +61,6 @@ public:
   static void setThrottle(uint16_t cab, uint8_t tSpeed, bool tDirection);
   static int8_t getThrottleSpeed(int cab);
   static uint8_t getThrottleSpeedByte(int cab);
-  static uint8_t getThrottleFrequency(int cab);
   static bool getThrottleDirection(int cab);
   static void writeCVByteMain(int cab, int cv, byte bValue);
   static void writeCVBitMain(int cab, int cv, byte bNum, bool bValue);
@@ -99,7 +98,7 @@ public:
     int loco;
     byte speedCode;
     byte groupFlags;
-    uint32_t functions;
+    unsigned long functions;
   };
  static LOCO speedTable[MAX_LOCOS];
  static int lookupSpeedTable(int locoId, bool autoCreate=true);

DCCEXParser.cpp

@@ -625,13 +625,12 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
         DCC::setThrottle(0,1,1); // this broadcasts speed 1(estop) and sets all reminders to speed 1.
         return;
 
-#ifdef HAVE_ENOUGH_MEMORY
     case 'c': // SEND METER RESPONSES <c>
         // No longer useful because of multiple tracks See <JG> and <JI>
         if (params>0) break;
         TrackManager::reportObsoleteCurrent(stream);
         return;
-#endif
+
     case 'Q': // SENSORS <Q>
         Sensor::printAll(stream);
         return;

DCCTimerAVR.cpp

@@ -142,9 +142,9 @@ void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t fbits) {
   if (pin == 9 || pin == 10) { // timer 2 is different
 
     if (fbits >= 3)
-      abits = B00000011;
+      abits = B11;
     else
-      abits = B00000001;
+      abits = B01;
 
     if (fbits >= 3)
       bbits = B0001;

DCCTimerMEGAAVR.cpp

@@ -125,11 +125,6 @@ void DCCTimer::reset() {
   while(true){}
 }
 
-void DCCTimer::DCCEXanalogWriteFrequency(uint8_t pin, uint32_t f) {
-}
-void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t fbits) {
-}
-
 int16_t ADCee::ADCmax() {
   return 4095;
 }

DCCTimerSAMD.cpp

@@ -156,11 +156,6 @@ void DCCTimer::reset() {
     while(true) {};
 }
 
-void DCCTimer::DCCEXanalogWriteFrequency(uint8_t pin, uint32_t f) {
-}
-void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t fbits) {
-}
-
 #define NUM_ADC_INPUTS NUM_ANALOG_INPUTS
 
 uint16_t ADCee::usedpins = 0;

DCCTimerTEENSY.cpp

@@ -141,11 +141,6 @@ void DCCTimer::reset() {
   SCB_AIRCR = 0x05FA0004;
 }
 
-void DCCTimer::DCCEXanalogWriteFrequency(uint8_t pin, uint32_t f) {
-}
-void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t fbits) {
-}
-
 int16_t ADCee::ADCmax() {
   return 4095;
 }

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202312310824Z"
+#define GITHUB_SHA "devel-202312251647Z"

MotorDriver.cpp

@@ -325,7 +325,7 @@ uint16_t taurustones[28] = { 165, 175, 196, 220,
 			     220, 196, 175, 165 };
 #endif
 #endif
-void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/) {
+void MotorDriver::setDCSignal(byte speedcode) {
   if (brakePin == UNUSED_PIN)
     return;
   // spedcoode is a dcc speed & direction
@@ -341,7 +341,7 @@ void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/)
 
   { // new block because of variable f
 #if defined(ARDUINO_ARCH_ESP32) || defined(ARDUINO_ARCH_STM32)
-    int f = frequency;
+    int f = 131;
 #ifdef VARIABLE_TONES
     if (tSpeed > 2) {
       if (tSpeed <= 58) {
@@ -349,11 +349,10 @@ void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/)
       }
     }
 #endif
-    DIAG(F("Brake %d freqency %d"), brakePin, f);
     DCCTimer::DCCEXanalogWriteFrequency(brakePin, f); // set DC PWM frequency to 100Hz XXX May move to setup
     DCCTimer::DCCEXanalogWrite(brakePin,brake);
 #else // all AVR here
-    DCCTimer::DCCEXanalogWriteFrequency(brakePin, frequency); // frequency steps 0 to 3
+    DCCTimer::DCCEXanalogWriteFrequency(brakePin, 0); // 0 is lowest possible f, like 120Hz
     analogWrite(brakePin,brake);
 #endif
   }
@@ -423,7 +422,7 @@ void MotorDriver::throttleInrush(bool on) {
   } else {
     pinMode(brakePin, OUTPUT);
   }
-#else // all AVR here
+#else
   if(on){
     DCCTimer::DCCEXanalogWriteFrequency(brakePin, 3);
   }

MotorDriver.h

@@ -187,7 +187,7 @@ class MotorDriver {
       }
     };
     inline pinpair getSignalPin() { return pinpair(signalPin,signalPin2); };
-    void setDCSignal(byte speedByte, uint8_t frequency=0);
+    void setDCSignal(byte speedByte);
     void throttleInrush(bool on);
     inline void detachDCSignal() {
 #if defined(__arm__)

TrackManager.cpp

@@ -202,7 +202,7 @@ void TrackManager::setDCSignal(int16_t cab, byte speedbyte) {
   FOR_EACH_TRACK(t) {
     if (trackDCAddr[t]!=cab && cab != 0) continue;
     if (track[t]->getMode() & TRACK_MODE_DC)
-      track[t]->setDCSignal(speedbyte, DCC::getThrottleFrequency(trackDCAddr[t]));
+      track[t]->setDCSignal(speedbyte);
   }
 }    
 
@@ -348,8 +348,8 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 }
 
 void TrackManager::applyDCSpeed(byte t) {
-  track[t]->setDCSignal(DCC::getThrottleSpeedByte(trackDCAddr[t]),
+  uint8_t speedByte=DCC::getThrottleSpeedByte(trackDCAddr[t]);
-			DCC::getThrottleFrequency(trackDCAddr[t]));
+  track[t]->setDCSignal(speedByte);
 }
 
 bool TrackManager::parseEqualSign(Print *stream, int16_t params, int16_t p[])
@@ -574,15 +574,14 @@ bool TrackManager::getPower(byte t, char s[]) {
   return false;
 }
 
+
 void TrackManager::reportObsoleteCurrent(Print* stream) {
   // This function is for backward JMRI compatibility only
   // It reports the first track only, as main, regardless of track settings.
   //  <c MeterName value C/V unit min max res warn>
-#ifdef HAVE_ENOUGH_MEMORY
   int maxCurrent=track[0]->raw2mA(track[0]->getRawCurrentTripValue());
   StringFormatter::send(stream, F("<c CurrentMAIN %d C Milli 0 %d 1 %d>\n"), 
-            track[0]->raw2mA(track[0]->getCurrentRaw(false)), maxCurrent, maxCurrent);
+            track[0]->raw2mA(track[0]->getCurrentRaw(false)), maxCurrent, maxCurrent);                  
-#endif
 }
 
 void TrackManager::reportCurrent(Print* stream) {