Merge 8740af814d9d7e03e234ec6036c1725edc21e96b into 8ac61b88d444ff1e8d48e17b590ba383ed591560

Extended accessory now uses an E instead of an A.

CommandDistributor.cpp

@@ -152,6 +152,14 @@ void  CommandDistributor::broadcastSensor(int16_t id, bool on ) {
   broadcastReply(COMMAND_TYPE, F("<%c %d>\n"), on?'Q':'q', id);
 }
 
+void CommandDistributor::broadcastAccessory(int16_t address, byte port, bool gate, bool on) {
+  broadcastReply(COMMAND_TYPE, F("<y A %d %d %c %c>\n"), address, port, gate?'1':'0', on?'1':'0');
+}
+
+void CommandDistributor::broadcastExtendedAccessory(int16_t address, int16_t value) {
+  broadcastReply(COMMAND_TYPE, F("<y E %d %d>\n"), address, value);
+}
+
 void  CommandDistributor::broadcastTurnout(int16_t id, bool isClosed ) {
   // For DCC++ classic compatibility, state reported to JMRI is 1 for thrown and 0 for closed;
   // The string below contains serial and Withrottle protocols which should

CommandDistributor.h

@@ -49,6 +49,8 @@ public :
   static void broadcastLoco(byte slot);
   static void broadcastForgetLoco(int16_t loco);
   static void broadcastSensor(int16_t id, bool value);
+  static void broadcastAccessory(int16_t address, byte port, bool gate, bool on);
+  static void broadcastExtendedAccessory(int16_t address, int16_t value);
   static void broadcastTurnout(int16_t id, bool isClosed);
   static void broadcastTurntable(int16_t id, uint8_t position, bool moving);
   static void broadcastClockTime(int16_t time, int8_t rate);

DCC.cpp

@@ -307,10 +307,12 @@ void DCC::setAccessory(int address, byte port, bool gate, byte onoff /*= 2*/) {
 #if defined(EXRAIL_ACTIVE)
     RMFT2::activateEvent(address<<2|port,gate);
 #endif
+    CommandDistributor::broadcastAccessory(address, port, gate, true);
   }
   if (onoff != 1) {
     b[1] &= ~0x08; // set C to 0
     DCCWaveform::mainTrack.schedulePacket(b, 2, 3);      // Repeat off packet three times
+    CommandDistributor::broadcastAccessory(address, port, gate, false);
   }
 }
 
@@ -362,6 +364,7 @@ whole range of the 11 bits sent to track.
     | ((address & 0x03)<<1);         // mask 2 bits, shift up 1
   b[2]=value;
   DCCWaveform::mainTrack.schedulePacket(b, sizeof(b), repeats);
+  CommandDistributor::broadcastExtendedAccessory(address, value);
   return true;
 }
 
@@ -759,7 +762,15 @@ void DCC::issueReminders() {
   if (!DCCWaveform::mainTrack.isReminderWindowOpen()) return;
   // Move to next loco slot.  If occupied, send a reminder.
   int reg = lastLocoReminder+1;
-  if (reg > highestUsedReg) reg = 0;  // Go to start of table
+  if (reg > highestUsedReg) {
+    if (loopStatus == 0 /*only needed if numLocos == 1 but we do not have a counter*/) {
+      // insert idle packet in the speed packet loop to fullfill the *censored*
+      // >5ms between packets to same decoder rule
+      const byte idlepacket[] = {0xFF, 0x00, 0xFF};
+      DCCWaveform::mainTrack.schedulePacket(idlepacket, 3, 0);
+    }
+    reg = 0;  // Go to start of table
+  }
   if (speedTable[reg].loco > 0) {
     // have found loco to remind
     if (issueReminder(reg))
@@ -780,40 +791,23 @@ bool DCC::issueReminder(int reg) {
          break;
        case 1: // remind function group 1 (F0-F4)
           if (flags & FN_GROUP_1)
-#ifndef DISABLE_FUNCTION_REMINDERS
 	    setFunctionInternal(loco,0, 128 | ((functions>>1)& 0x0F) | ((functions & 0x01)<<4),0); // 100D DDDD
-#else
-	    setFunctionInternal(loco,0, 128 | ((functions>>1)& 0x0F) | ((functions & 0x01)<<4),2);
-          flags&= ~FN_GROUP_1;  // dont send them again
-#endif
           break;
        case 2: // remind function group 2 F5-F8
           if (flags & FN_GROUP_2)
-#ifndef DISABLE_FUNCTION_REMINDERS
   	    setFunctionInternal(loco,0, 176 | ((functions>>5)& 0x0F),0);                           // 1011 DDDD
-#else
-	    setFunctionInternal(loco,0, 176 | ((functions>>5)& 0x0F),2);
-          flags&= ~FN_GROUP_2;  // dont send them again
-#endif
           break;
        case 3: // remind function group 3 F9-F12
           if (flags & FN_GROUP_3)
-#ifndef DISABLE_FUNCTION_REMINDERS
 	    setFunctionInternal(loco,0, 160 | ((functions>>9)& 0x0F),0);                           // 1010 DDDD
-#else
-	    setFunctionInternal(loco,0, 160 | ((functions>>9)& 0x0F),2);
-          flags&= ~FN_GROUP_3;  // dont send them again
-#endif
           break;
        case 4: // remind function group 4 F13-F20
           if (flags & FN_GROUP_4)
-	    setFunctionInternal(loco,222, ((functions>>13)& 0xFF),2);
-          flags&= ~FN_GROUP_4;  // dont send them again
+	    setFunctionInternal(loco,222, ((functions>>13)& 0xFF),0);
           break;
        case 5: // remind function group 5 F21-F28
           if (flags & FN_GROUP_5)
-	    setFunctionInternal(loco,223, ((functions>>21)& 0xFF),2);
-          flags&= ~FN_GROUP_5;  // dont send them again
+	    setFunctionInternal(loco,223, ((functions>>21)& 0xFF),0);
           break;
       }
       loopStatus++;

DCCEXParser.cpp

@@ -92,7 +92,7 @@ Once a new OPCODE is decided upon, update this list.
   W, Write CV
   x,
   X, Invalid command response
-  y, 
+  y, Accessory/extended accessory broadcast
   Y, Output broadcast
   z, Direct output
   Z, Output configuration/control

version.h

@@ -3,7 +3,8 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.4.7"
+#define VERSION "5.4.8"
+// 5.4.8  - Bugfix: Insert idle packet at end of speed reminder loop; treat all function groups equal
 // 5.4.7  - Bugfix: EXRAIL fix CLEAR_ALL_STASH
 // 5.4.6  - Bugfix: Do not drop further commands in same packet
 // 5.4.5  - ESP32: Better detection of correct IDF version