Merge 5d411e6a08 into b4e7982099

EXRAIL2.cpp

@@ -205,14 +205,15 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
 
   // Second pass startup, define any turnouts or servos, set signals red
   // add sequences onRoutines to the lookups
-if (compileFeatures & FEATURE_SIGNAL) {
+  if (compileFeatures & FEATURE_SIGNAL) {
     onRedLookup=LookListLoader(OPCODE_ONRED);
     onAmberLookup=LookListLoader(OPCODE_ONAMBER);
     onGreenLookup=LookListLoader(OPCODE_ONGREEN);
     for (int sigslot=0;;sigslot++) {
-    VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-    if (sigid==0) break;  // end of signal list
-    doSignal(sigid & SIGNAL_ID_MASK, SIGNAL_RED);
+      int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+      if (sighandle==0) break;  // end of signal list
+      VPIN sigid = sighandle & SIGNAL_ID_MASK;
+      doSignal(sigid, SIGNAL_RED);
     }
   }
 
@@ -1143,16 +1144,17 @@ void RMFT2::kill(const FSH * reason, int operand) {
 
 int16_t RMFT2::getSignalSlot(int16_t id) {
   for (int sigslot=0;;sigslot++) {
-      int16_t sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-      if (sigid==0) { // end of signal list 
+      int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+      if (sighandle==0) { // end of signal list 
         DIAG(F("EXRAIL Signal %d not defined"), id);
         return -1;
       }
+      VPIN sigid = sighandle & SIGNAL_ID_MASK;
       // sigid is the signal id used in RED/AMBER/GREEN macro
       // for a LED signal it will be same as redpin
       // but for a servo signal it will also have SERVO_SIGNAL_FLAG set. 
 
-      if ((sigid & SIGNAL_ID_MASK)!= id) continue; // keep looking
+      if (sigid != id) continue; // keep looking
       return sigslot; // relative slot in signals table
   }  
 }
@@ -1175,13 +1177,14 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
  
   // Correct signal definition found, get the rag values
   int16_t sigpos=sigslot*8; 
-  VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
+  int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
   VPIN redpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2);
   VPIN amberpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4);
   VPIN greenpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6);
   //if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
 
-  VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
+  VPIN sigtype=sighandle & ~SIGNAL_ID_MASK;
+  VPIN sigid = sighandle & SIGNAL_ID_MASK;
 
   if (sigtype == SERVO_SIGNAL_FLAG) {
     // A servo signal, the pin numbers are actually servo positions
@@ -1204,7 +1207,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
     byte value=redpin;
     if (rag==SIGNAL_AMBER) value=amberpin;
     if (rag==SIGNAL_GREEN) value=greenpin; 
-    DCC::setExtendedAccessory(sigid & SIGNAL_ID_MASK,value);
+    DCC::setExtendedAccessory(sigid, value);
     return; 
   }
 
@@ -1255,8 +1258,9 @@ bool RMFT2::signalAspectEvent(int16_t address, byte aspect ) {
   int16_t sigslot=getSignalSlot(address);
   if (sigslot<0) return false;  // this is not a defined signal 
   int16_t sigpos=sigslot*8; 
-  VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
-  VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
+  int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
+  VPIN sigtype=sighandle & ~SIGNAL_ID_MASK;
+  VPIN sigid = sighandle & SIGNAL_ID_MASK;
   if (sigtype!=DCCX_SIGNAL_FLAG) return false; // not a DCCX signal
   // Turn an aspect change into a RED/AMBER/GREEN setting
   if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2)) {

EXRAIL2Parser.cpp

@@ -214,12 +214,13 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
       // do the signals
       // flags[n] represents the state of the nth signal in the table 
       for (int sigslot=0;;sigslot++) {
-        VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-        if (sigid==0) break; // end of signal list 
+        int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+        if (sighandle==0) break; // end of signal list
+	VPIN sigid = sighandle & SIGNAL_ID_MASK;
 	byte flag=flags[sigslot] & SIGNAL_MASK; // obtain signal flags for this id
         StringFormatter::send(stream,F("\n%S[%d]"), 
 			      (flag == SIGNAL_RED)? F("RED") : (flag==SIGNAL_GREEN) ? F("GREEN") : F("AMBER"),
-          sigid & SIGNAL_ID_MASK); 
+			      sigid);
       } 
     }
 

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202404061747Z"
+#define GITHUB_SHA "devel-202404211704Z"

Turnouts.cpp

@@ -123,7 +123,6 @@
     return true;
   }
 
-#define DIAG_IO
   // Static setClosed function is invoked from close(), throw() etc. to perform the 
   //  common parts of the turnout operation.  Code which is specific to a turnout
   //  type should be placed in the virtual function setClosedInternal(bool) which is

version.h

@@ -3,7 +3,8 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.50"
+#define VERSION "5.2.51"
+// 5.2.51 - Bugfix for SIGNAL: Distinguish between sighandle and sigid
 // 5.2.50 - EXRAIL ONBUTTON/ONSENSOR observe LATCH
 // 5.2.49 - EXRAIL additions:
 //          ONBUTTON, ONSENSOR