DCC.cpp

@@ -278,22 +278,6 @@ void DCC::setAccessory(int address, byte port, bool gate, byte onoff /*= 2*/) {
   }
 }
 
-void DCC::setExtendedAccessory(int16_t address, int16_t value, byte repeats) {
-
-  // format is 10AAAAAA, 0AAA0AA1, 000XXXXX 
-  if (address != (address & 0x7F)) return;
-  if (value != (value & 0x1F)) return;
-    
-  byte b[3];
-  b[0]= 0x80 | ((address & 0x7FF)>>5);
-  b[1]= 0x01 | ((address & 0x1c)<<2) | (address & 0x03)<<1;
-  b[2]=value & 0x1F;
-  DCCWaveform::mainTrack.schedulePacket(b, sizeof(b), repeats);      // Repeat on packet three times
-#if defined(EXRAIL_ACTIVE)
- // TODO RMFT2::activateExtendedEvent(address,value);
-#endif
-}
-
 //
 // writeCVByteMain: Write a byte with PoM on main. This writes
 // the 5 byte sized packet to implement this DCC function

DCC.h

@@ -71,7 +71,6 @@ public:
   static uint32_t getFunctionMap(int cab);
   static void updateGroupflags(byte &flags, int16_t functionNumber);
   static void setAccessory(int address, byte port, bool gate, byte onoff = 2);
-  static void setExtendedAccessory(int16_t address, int16_t value, byte repeats=3);
   static bool writeTextPacket(byte *b, int nBytes);
   
   // ACKable progtrack calls  bitresults callback 0,0 or -1, cv returns value or -1

DCCEXParser.cpp

@@ -45,7 +45,7 @@ Once a new OPCODE is decided upon, update this list.
   0, Track power off
   1, Track power on
   a, DCC accessory control
-  A, DCC extended accessory control
+  A,
   b, Write CV bit on main
   B, Write CV bit
   c, Request current command
@@ -385,18 +385,6 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
         }
         return;
      
-    case 'A': // EXTENDED ACCESSORY <A address value>
-        { 
-          // Note: if this happens to match a defined EXRAIL 
-          // DCCX_SIGNAL, then EXRAIL will have intercepted
-          // this command alrerady.   
-          if (params!=2) break; 
-          if (p[0] != (p[0] & 0x7F)) break;
-          if (p[1] != (p[1] & 0x1F)) break; 
-          DCC::setExtendedAccessory(p[0],p[1]);
-        }
-        return;
-     
     case 'T': // TURNOUT  <T ...>
         if (parseT(stream, params, p))
             return;

EXRAIL2.cpp

@@ -800,14 +800,6 @@ void RMFT2::loop2() {
     DCC::setAccessory(addr,subaddr,active);
     break;
   }
-   case OPCODE_ASPECT: {
-    // operand is address<<5 |  value
-    int16_t address=operand>>5;
-    byte aspect=operand & 0x1f;
-    if (!signalAspectEvent(address,aspect))
-      DCC::setExtendedAccessory(address,aspect);
-    break;
-  }
     
   case OPCODE_FOLLOW:
     progCounter=routeLookup->find(operand);
@@ -1069,7 +1061,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
   if (diag) DIAG(F(" doSignal %d %x"),id,rag);
   
   // Schedule any event handler for this signal change.
-  // This will work even without a signal definition. 
+  // Thjis will work even without a signal definition. 
   if (rag==SIGNAL_RED) onRedLookup->handleEvent(F("RED"),id);
   else if (rag==SIGNAL_GREEN) onGreenLookup->handleEvent(F("GREEN"),id);
   else onAmberLookup->handleEvent(F("AMBER"),id);
@@ -1106,16 +1098,6 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
     return; 
   }
 
- if (sigtype== DCCX_SIGNAL_FLAG) {
-    // redpin,amberpin,greenpin are the 3 aspects
-    byte value=redpin;
-    if (rag==SIGNAL_AMBER) value=amberpin;
-    if (rag==SIGNAL_GREEN) value=greenpin; 
-    DCC::setExtendedAccessory(sigid & SIGNAL_ID_MASK,value);
-    return; 
-  }
-
-
   // LED or similar 3 pin signal, (all pins zero would be a virtual signal)
   // If amberpin is zero, synthesise amber from red+green
   const byte SIMAMBER=0x00;
@@ -1149,38 +1131,6 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
   return (flags[sigslot] & SIGNAL_MASK) == rag;
 }
 
-
-// signalAspectEvent returns true if the aspect is destined
-// for a defined DCCX_SIGNAL which will handle all the RAG flags
-// and ON* handlers.
-// Otherwise false so the parser should send the command directly 
-bool RMFT2::signalAspectEvent(int16_t address, byte aspect ) {
-  if (!(compileFeatures & FEATURE_SIGNAL)) return false; 
-  int16_t sigslot=getSignalSlot(address);
-  if (sigslot<0) return false;  // this is not a defined signal 
-  int16_t sigpos=sigslot*8; 
-  VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
-  VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
-  if (sigtype!=DCCX_SIGNAL_FLAG) return false; // not a DCCX signal
-  // Turn an aspect change into a RED/AMBER/GREEN setting
-  if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2)) {
-      doSignal(sigid,SIGNAL_RED);
-      return true;
-  }
-  
-  if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4)) {
-      doSignal(sigid,SIGNAL_AMBER);
-      return true;
-  }
-  
-  if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6)) {
-      doSignal(sigid,SIGNAL_GREEN);
-      return true;
-  }
-
-  return false;  // aspect is not a defined one    
-}
-
 void RMFT2::turnoutEvent(int16_t turnoutId, bool closed) {
   // Hunt for an ONTHROW/ONCLOSE for this turnout
   if (closed)  onCloseLookup->handleEvent(F("CLOSE"),turnoutId);

EXRAIL2.h

@@ -54,7 +54,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
              OPCODE_START,OPCODE_SETLOCO,OPCODE_SENDLOCO,OPCODE_FORGET,
              OPCODE_PAUSE, OPCODE_RESUME,OPCODE_POWEROFF,OPCODE_POWERON,
              OPCODE_ONCLOSE, OPCODE_ONTHROW, OPCODE_SERVOTURNOUT, OPCODE_PINTURNOUT,
-             OPCODE_PRINT,OPCODE_DCCACTIVATE,OPCODE_ASPECT,
+             OPCODE_PRINT,OPCODE_DCCACTIVATE,
              OPCODE_ONACTIVATE,OPCODE_ONDEACTIVATE,
              OPCODE_ROSTER,OPCODE_KILLALL,
              OPCODE_ROUTE,OPCODE_AUTOMATION,OPCODE_SEQUENCE,
@@ -155,11 +155,9 @@ class LookList {
     static void clockEvent(int16_t clocktime, bool change);
     static void rotateEvent(int16_t id, bool change);
     static void powerEvent(int16_t track, bool overload);
-    static bool signalAspectEvent(int16_t address, byte aspect );    
     static const int16_t SERVO_SIGNAL_FLAG=0x4000;
     static const int16_t ACTIVE_HIGH_SIGNAL_FLAG=0x2000;
     static const int16_t DCC_SIGNAL_FLAG=0x1000;
-    static const int16_t DCCX_SIGNAL_FLAG=0x3000;
     static const int16_t SIGNAL_ID_MASK=0x0FFF;
  // Throttle Info Access functions built by exrail macros 
   static const byte rosterNameCount;

EXRAIL2MacroReset.h

@@ -31,7 +31,6 @@
 #undef ALIAS
 #undef AMBER
 #undef ANOUT
-#undef ASPECT
 #undef AT
 #undef ATGTE
 #undef ATLT
@@ -45,7 +44,6 @@
 #undef CLOSE 
 #undef CONFIGURE_SERVO
 #undef DCC_SIGNAL
-#undef DCCX_SIGNAL
 #undef DCC_TURNTABLE
 #undef DEACTIVATE
 #undef DEACTIVATEL
@@ -188,7 +186,6 @@
 #define AMBER(signal_id)
 #define ANOUT(vpin,value,param1,param2)
 #define AT(sensor_id)
-#define ASPECT(address,value)
 #define ATGTE(sensor_id,value) 
 #define ATLT(sensor_id,value) 
 #define ATTIMEOUT(sensor_id,timeout_ms)
@@ -201,7 +198,6 @@
 #define CLOSE(id)
 #define CONFIGURE_SERVO(vpin,pos1,pos2,profile) 
 #define DCC_SIGNAL(id,add,subaddr)
-#define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect)
 #define DCC_TURNTABLE(id,home,description)
 #define DEACTIVATE(addr,subaddr)
 #define DEACTIVATEL(addr)

EXRAIL2Parser.cpp

@@ -51,14 +51,6 @@ void RMFT2::ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16
     opcode=0;
     break;
   
-  case 'A': //  <A address aspect>
-    if (paramCount!=2) break; 
-    // Ask exrail if this is just changing the aspect on a 
-    // predefined DCCX_SIGNAL. Because this will handle all 
-    // the IFRED and ONRED type issues at the same time.  
-    if (signalAspectEvent(p[0],p[1])) opcode=0; // all done 
-    break;
-
   case 'L':
     // This entire code block is compiled out if LLC macros not used 
     if (!(compileFeatures & FEATURE_LCC)) return;

EXRAILMacros.h

@@ -117,9 +117,6 @@ static_assert(!hasdup(compileTimeSequenceList[0],1),"Duplicate SEQUENCE/ROUTE/AU
 //  - check range on LATCH/UNLATCH
 // This pass generates no runtime data or code 
 #include "EXRAIL2MacroReset.h"
-#undef ASPECT
-#define ASPECT(address,value) static_assert((address & 0x7ff)== address, "invalid Address"); \
-                              static_assert((value & 0x1F)== value, "Invalid value");
 #undef CALL
 #define CALL(id) static_assert(hasseq(id),"Sequence not found");
 #undef FOLLOW
@@ -172,8 +169,6 @@ bool exrailHalSetup() {
 #define SERVO_SIGNAL(vpin,redval,amberval,greenval) | FEATURE_SIGNAL 
 #undef DCC_SIGNAL
 #define DCC_SIGNAL(id,addr,subaddr) | FEATURE_SIGNAL
-#undef DCCX_SIGNAL
-#define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect) | FEATURE_SIGNAL
 #undef VIRTUAL_SIGNAL
 #define VIRTUAL_SIGNAL(id) | FEATURE_SIGNAL
 
@@ -403,8 +398,6 @@ const FSH * RMFT2::getRosterFunctions(int16_t id) {
 #define SERVO_SIGNAL(vpin,redval,amberval,greenval) vpin | RMFT2::SERVO_SIGNAL_FLAG,redval,amberval,greenval, 
 #undef DCC_SIGNAL
 #define DCC_SIGNAL(id,addr,subaddr) id | RMFT2::DCC_SIGNAL_FLAG,addr,subaddr,0,
-#undef DCCX_SIGNAL
-#define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect) id | RMFT2::DCCX_SIGNAL_FLAG,redAspect,amberAspect,greenAspect,
 #undef VIRTUAL_SIGNAL
 #define VIRTUAL_SIGNAL(id) id,0,0,0,
 
@@ -439,7 +432,6 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define ALIAS(name,value...) 
 #define AMBER(signal_id) OPCODE_AMBER,V(signal_id),
 #define ANOUT(vpin,value,param1,param2) OPCODE_SERVO,V(vpin),OPCODE_PAD,V(value),OPCODE_PAD,V(param1),OPCODE_PAD,V(param2),
-#define ASPECT(address,value) OPCODE_ASPECT,V((address<<5) | (value & 0x1F)),
 #define AT(sensor_id) OPCODE_AT,V(sensor_id),
 #define ATGTE(sensor_id,value) OPCODE_ATGTE,V(sensor_id),OPCODE_PAD,V(value),  
 #define ATLT(sensor_id,value) OPCODE_ATLT,V(sensor_id),OPCODE_PAD,V(value),  
@@ -461,7 +453,6 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define DELAYMINS(mindelay) OPCODE_DELAYMINS,V(mindelay),
 #define DELAYRANDOM(mindelay,maxdelay) DELAY(mindelay) OPCODE_RANDWAIT,V((maxdelay-mindelay)/100L),
 #define DCC_SIGNAL(id,add,subaddr)
-#define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect)
 #define DONE OPCODE_ENDTASK,0,0,
 #define DRIVE(analogpin) OPCODE_DRIVE,V(analogpin),
 #define ELSE OPCODE_ELSE,0,0,

version.h

@@ -3,11 +3,7 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.34"
-// 5.2.34 - <A address aspect> Command fopr DCC Extended Accessories
-//        - Exrail ASPECT(address,aspect) for above.
-//        - EXRAIL DCCX_SIGNAL(Address,redAspect,amberAspect,greenAspect)
-//        - Exrail intercept <A ...> for DCC Signals. 
+#define VERSION "5.2.33"
 // 5.2.33 - Exrail CONFIGURE_SERVO(vpin,pos1,pos2,profile)
 // 5.2.32 - Railcom Cutout (Initial trial Mega2560 only)
 // 5.2.31 - Exrail JMRI_SENSOR(vpin [,count]) creates <S> types.