Merge 2afb5f3d6c into bd44184f57

Added Updated Versiom 4.1.1 thru 4.1.6

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202312131041Z"
+#define GITHUB_SHA "devel-202312251647Z"

WifiESP32.cpp

@@ -74,25 +74,39 @@ class NetworkClient {
 public:
   NetworkClient(WiFiClient c) {
     wifi = c;
-  };
-  bool ok() {
-    return (inUse && wifi.connected());
-  };
-  bool recycle(WiFiClient c) {
-
-    if (inUse == true) return false;
-
-    // return false here until we have
-    // implemented a LRU timer
-    // if (LRU too recent) return false;
-    return false;
-
-    wifi = c;
     inUse = true;
+  };
+  bool active(byte clientId) {
+    if (!inUse)
+      return false;
+    if(!wifi.connected()) {
+      DIAG(F("Remove client %d"), clientId);
+      CommandDistributor::forget(clientId);
+      wifi.stop();
+      inUse = false;
+      return false;
+    }
     return true;
+  }
+  bool recycle(WiFiClient c) {
+    if (wifi == c) {
+      if (inUse == true)
+	DIAG(F("WARNING: Duplicate"));
+      else
+	DIAG(F("Returning"));
+      inUse = true;
+      return true;
+    }
+    if (inUse == false) {
+      wifi = c;
+      inUse = true;
+      return true;
+    }
+    return false;
   };
   WiFiClient wifi;
-  bool inUse = true;
+private:
+  bool inUse;
 };
 
 static std::vector<NetworkClient> clients; // a list to hold all clients
@@ -282,37 +296,26 @@ void WifiESP::loop() {
   // really no good way to check for LISTEN especially in AP mode?
   wl_status_t wlStatus;
   if (APmode || (wlStatus = WiFi.status()) == WL_CONNECTED) {
-    // loop over all clients and remove inactive
-    for (clientId=0; clientId<clients.size(); clientId++){
-      // check if client is there and alive
-      if(clients[clientId].inUse && !clients[clientId].wifi.connected()) {
-	DIAG(F("Remove client %d"), clientId);
-	CommandDistributor::forget(clientId);
-	clients[clientId].wifi.stop();
-	clients[clientId].inUse = false;
-	//Do NOT clients.erase(clients.begin()+clientId) as
-	//that would mix up clientIds for later.
-      }
-    }
     if (server->hasClient()) {
       WiFiClient client;
       while (client = server->available()) {
 	for (clientId=0; clientId<clients.size(); clientId++){
 	  if (clients[clientId].recycle(client)) {
-	    DIAG(F("Recycle client %d %s"), clientId, client.remoteIP().toString().c_str());
+	    DIAG(F("Recycle client %d %s:%d"), clientId, client.remoteIP().toString().c_str(),client.remotePort());
 	    break;
 	  }
 	}
 	if (clientId>=clients.size()) {
 	  NetworkClient nc(client);
 	  clients.push_back(nc);
-	  DIAG(F("New client %d, %s"), clientId, client.remoteIP().toString().c_str());
+	  DIAG(F("New client %d, %s:%d"), clientId, client.remoteIP().toString().c_str(),client.remotePort());
 	}
       }
     }
     // loop over all connected clients
+    // this removes as a side effect inactive clients when checking ::active()
     for (clientId=0; clientId<clients.size(); clientId++){
-      if(clients[clientId].ok()) {
+      if(clients[clientId].active(clientId)) {
 	int len;
 	if ((len = clients[clientId].wifi.available()) > 0) {
 	  // read data from client
@@ -350,7 +353,7 @@ void WifiESP::loop() {
 	}
 	// buffer filled, end with '\0' so we can use it as C string
 	buffer[count]='\0';
-	if((unsigned int)clientId <= clients.size() && clients[clientId].ok()) {
+	if((unsigned int)clientId <= clients.size() && clients[clientId].active(clientId)) {
 	  if (Diag::CMD || Diag::WITHROTTLE)
 	    DIAG(F("SEND %d:%s"), clientId, buffer);
 	  clients[clientId].wifi.write(buffer,count);
@@ -383,8 +386,9 @@ void WifiESP::loop() {
   // prio task. On core1 this is not a problem
   // as there the wdt is disabled by the
   // arduio IDE startup routines.
-  if (xPortGetCoreID() == 0)
+  if (xPortGetCoreID() == 0) {
     feedTheDog0();
-  yield();
+    yield();
+  }
 }
 #endif //ESP32

WifiInterface.cpp

@@ -68,7 +68,9 @@ Stream * WifiInterface::wifiStream;
 #define NUM_SERIAL 3
 #define SERIAL1 Serial3
 #define SERIAL3 Serial5
-#elif defined(ARDUINO_NUCLEO_F413ZH) || defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F446ZE) || defined(ARDUINO_NUCLEO_F412ZG)
+#elif defined(ARDUINO_NUCLEO_F413ZH) || defined(ARDUINO_NUCLEO_F429ZI) \
+    || defined(ARDUINO_NUCLEO_F446ZE) || defined(ARDUINO_NUCLEO_F412ZG) \
+    || defined(ARDUINO_NUCLEO_F439ZI)
 #define NUM_SERIAL 2
 #define SERIAL1 Serial6
 #else

version.h

@@ -3,7 +3,8 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.16"
+#define VERSION "5.2.17"
+// 5.2.17 - ESP32 simplify network logic
 // 5.2.16 - Bugfix to allow for devices using the EX-IOExpander protocol to have no analogue or no digital pins
 // 5.2.15 - move call to CommandDistributor::broadcastPower() into the TrackManager::setTrackPower(*) functions
 //        - add repeats to function packets that are not reminded in accordance with accessory packets
@@ -207,9 +208,18 @@
 //       TrackManager DCC & DC up to 8 Districts Architecture 
 //       Automatic ALIAS(name) 
 //       Command Parser now accepts Underscore in Alias Names
+// 4.1.6 Support for new EX-MotorShield8874 Dual 5Amp Shield
+// 4.1.5 Bugfix LCN number parsing 
+// 4.1.4 Bugfix for issue #299 Turnout Description NULL
+// 4.1.3 Bugfix: Ethernet init order
+// 4.1.2 Bugfix: Ethernet shield W5100 does not report HW or link level
 // 4.1.1 Bugfix: preserve turnout format
-//       Bugfix: parse multiple commands in one buffer string correct
-//       Bugfix: </> command signal status in Exrail
+//       Bugfix: parse multiple commands in one buffer string correctly (ex: <s><Q>)
+//       Bugfix: </> command signal status of EX-RAIL tasks or threads
+//       Bugfix: EX-RAIL read long loco address
+//       Bugfix: Add space character after version string 4.1.1 for JMRI parsing.
+//       Improved display and loop time for signals make service start to be outside the DONT_TOUCH_WIFI_CONF area
+//       Improve WiFi startup by making service start to be outside the DONT_TOUCH_WIFI_CONF area
 // 4.1.0 ...
 //
 // 4.0.2 EXRAIL additions: