EXRAIL2.cpp

@@ -677,14 +677,13 @@ void RMFT2::loop2() {
     break;
 
   case OPCODE_SET:
+    killBlinkOnVpin(operand);
+    IODevice::write(operand,true);
+    break;
+    
   case OPCODE_RESET:
-    { 
-      auto count=getOperand(1);
-      for (uint16_t i=0;i<count;i++) {
-        killBlinkOnVpin(operand+i);
-        IODevice::write(operand+i,opcode==OPCODE_SET);
-      }
-    }
+    killBlinkOnVpin(operand);
+    IODevice::write(operand,false);
     break;
   
   case OPCODE_BLINK: 

EXRAIL2MacroReset.h

@@ -309,7 +309,7 @@
 #define READ_LOCO 
 #define RED(signal_id) 
 #define RESERVE(blockid) 
-#define RESET(pin,count...) 
+#define RESET(pin) 
 #define RESUME 
 #define RETURN 
 #define REV(speed) 
@@ -335,7 +335,7 @@
 #define SERVO2(id,position,duration) 
 #define SERVO_SIGNAL(vpin,redpos,amberpos,greenpos)
 #define SERVO_TURNOUT(id,pin,activeAngle,inactiveAngle,profile,description...) 
-#define SET(pin,count...) 
+#define SET(pin) 
 #define SET_TRACK(track,mode)
 #define SET_POWER(track,onoff)
 #define SETLOCO(loco) 

EXRAILMacros.h

@@ -607,7 +607,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define READ_LOCO OPCODE_READ_LOCO1,0,0,OPCODE_READ_LOCO2,0,0,
 #define RED(signal_id) OPCODE_RED,V(signal_id),
 #define RESERVE(blockid) OPCODE_RESERVE,V(blockid),
-#define RESET(pin,count...) OPCODE_RESET,V(pin),OPCODE_PAD,V(#count[0] ? count+0: 1),
+#define RESET(pin) OPCODE_RESET,V(pin),
 #define RESUME OPCODE_RESUME,0,0,
 #define RETURN OPCODE_RETURN,0,0,
 #define REV(speed) OPCODE_REV,V(speed),
@@ -635,7 +635,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define SERVO2(id,position,ms) OPCODE_SERVO,V(id),OPCODE_PAD,V(position),OPCODE_PAD,V(PCA9685::Instant),OPCODE_PAD,V(ms/100L),
 #define SERVO_SIGNAL(vpin,redpos,amberpos,greenpos)
 #define SERVO_TURNOUT(id,pin,activeAngle,inactiveAngle,profile,description...) OPCODE_SERVOTURNOUT,V(id),OPCODE_PAD,V(pin),OPCODE_PAD,V(activeAngle),OPCODE_PAD,V(inactiveAngle),OPCODE_PAD,V(PCA9685::ProfileType::profile),
-#define SET(pin,count...) OPCODE_SET,V(pin),OPCODE_PAD,V(#count[0] ? count+0: 1),
+#define SET(pin) OPCODE_SET,V(pin),
 #define SET_TRACK(track,mode)  OPCODE_SET_TRACK,V(TRACK_MODE_##mode  <<8 | TRACK_NUMBER_##track),
 #define SET_POWER(track,onoff) OPCODE_SET_POWER,V(TRACK_POWER_##onoff),OPCODE_PAD, V(TRACK_NUMBER_##track),
 #define SETLOCO(loco) OPCODE_SETLOCO,V(loco),

IO_EXSensorCAM.h

@@ -121,7 +121,6 @@ void _begin() {
 // Configuration isn't done frequently so we can use blocking I2C calls here, and so buffers can
 // be allocated from the stack to reduce RAM allocation.
 bool _configure(VPIN vpin, ConfigTypeEnum configType, int paramCount, int params[]) override { 
-  (void)configType; (void)params; // unused
   if(_verPrint) DIAG(F("_configure() driver IO_EXSensorCAM v0.%d.%d vpin: %d "), driverVer/100,driverVer%100,vpin);
   _verPrint=false;           //only give driver versions once
   if (paramCount != 1) return false;

version.h

@@ -3,8 +3,7 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.89"
-// 5.2.89 - EXRAIL SET(vpin[,npins]) RESET(vpin,[,npins]) pin range manipulation 
+#define VERSION "5.2.88"
 // 5.2.88 - Fix bug where EX-Turntable objects return incorrect angle for home with <JP x>
 // 5.2.87 - CamParser and IO_EXSensorCam driver
 // 5.2.86 - IO_TCA8418 driver for keypad matrix input now fully functioning, including being able to use an interrupt pin