Merge 2c133da140 into a8b4e39733

Avoid calling the DCC packets for setfreq macro.

DCC.cpp

@@ -271,6 +271,20 @@ uint32_t DCC::getFunctionMap(int cab) {
   return (reg<0)?0:speedTable[reg].functions;
 }
 
+// saves DC frequency (0..3) in spare functions 29,30,31
+void DCC::setDCFreq(int cab,byte freq) {
+  if (cab==0 || freq>3) return;
+  auto reg=lookupSpeedTable(cab,true);
+  // drop and replace F29,30,31 (top 3 bits) 
+  auto newFunctions=speedTable[reg].functions & 0x1FFFFFFFUL;
+  if (freq==1)      newFunctions |= (1UL<<29); // F29
+  else if (freq==2) newFunctions |= (1UL<<30); // F30
+  else if (freq==3) newFunctions |= (1UL<<31); // F31
+  if (newFunctions==speedTable[reg].functions) return; // no change 
+  speedTable[reg].functions=newFunctions;
+  CommandDistributor::broadcastLoco(reg);
+}
+
 void DCC::setAccessory(int address, byte port, bool gate, byte onoff /*= 2*/) {
   // onoff is tristate:
   // 0  => send off packet

DCC.h

@@ -70,6 +70,7 @@ public:
   static void changeFn(int cab, int16_t functionNumber);
   static int8_t getFn(int cab, int16_t functionNumber);
   static uint32_t getFunctionMap(int cab);
+  static void setDCFreq(int cab,byte freq);
   static void updateGroupflags(byte &flags, int16_t functionNumber);
   static void setAccessory(int address, byte port, bool gate, byte onoff = 2);
   static bool setExtendedAccessory(int16_t address, int16_t value, byte repeats=3);

DCCACK.cpp

@@ -27,8 +27,8 @@
 #include "DCCWaveform.h"
 #include "TrackManager.h"
 
-unsigned int DCCACK::minAckPulseDuration = 2000; // micros
-unsigned int DCCACK::maxAckPulseDuration = 20000; // micros
+unsigned long DCCACK::minAckPulseDuration = 2000; // micros
+unsigned long DCCACK::maxAckPulseDuration = 20000; // micros
   
 MotorDriver *  DCCACK::progDriver=NULL;
 ackOp  const *  DCCACK::ackManagerProg;
@@ -50,7 +50,7 @@ volatile uint8_t DCCACK::numAckSamples=0;
 uint8_t DCCACK::trailingEdgeCounter=0;
 
 
- unsigned int DCCACK::ackPulseDuration;  // micros
+unsigned long DCCACK::ackPulseDuration;  // micros
 unsigned long DCCACK::ackPulseStart; // micros
  volatile bool DCCACK::ackDetected;
  unsigned long DCCACK::ackCheckStart; // millis
@@ -127,7 +127,7 @@ bool DCCACK::checkResets(uint8_t numResets) {
 void DCCACK::setAckBaseline() {
       int baseline=progDriver->getCurrentRaw();
       ackThreshold= baseline + progDriver->mA2raw(ackLimitmA);
-      if (Diag::ACK) DIAG(F("ACK baseline=%d/%dmA Threshold=%d/%dmA Duration between %uus and %uus"),
+      if (Diag::ACK) DIAG(F("ACK baseline=%d/%dmA Threshold=%d/%dmA Duration between %lus and %lus"),
 			  baseline,progDriver->raw2mA(baseline),
 			  ackThreshold,progDriver->raw2mA(ackThreshold),
                           minAckPulseDuration, maxAckPulseDuration);
@@ -146,7 +146,7 @@ void DCCACK::setAckPending() {
 
 byte DCCACK::getAck() {
       if (ackPending) return (2);  // still waiting
-      if (Diag::ACK) DIAG(F("%S after %dmS max=%d/%dmA pulse=%uuS samples=%d gaps=%d"),ackDetected?F("ACK"):F("NO-ACK"), ackCheckDuration,
+      if (Diag::ACK) DIAG(F("%S after %dmS max=%d/%dmA pulse=%luS samples=%d gaps=%d"),ackDetected?F("ACK"):F("NO-ACK"), ackCheckDuration,
 			  ackMaxCurrent,progDriver->raw2mA(ackMaxCurrent), ackPulseDuration, numAckSamples, numAckGaps);
       if (ackDetected) return (1); // Yes we had an ack
       return(0);  // pending set off but not detected means no ACK.   

DCCACK.h

@@ -79,10 +79,10 @@ class DCCACK {
     static inline void setAckLimit(int mA) {
 	ackLimitmA = mA;
     }
-    static inline void setMinAckPulseDuration(unsigned int i) {
+    static inline void setMinAckPulseDuration(unsigned long i) {
 	minAckPulseDuration = i;
     }
-    static inline void setMaxAckPulseDuration(unsigned int i) {
+    static inline void setMaxAckPulseDuration(unsigned long i) {
 	maxAckPulseDuration = i;
     }
 
@@ -126,11 +126,11 @@ class DCCACK {
     static unsigned long ackCheckStart; // millis
     static unsigned int ackCheckDuration; // millis       
     
-    static unsigned int ackPulseDuration;  // micros
+    static unsigned long ackPulseDuration;  // micros
     static unsigned long ackPulseStart; // micros
 
-    static unsigned int minAckPulseDuration ; // micros
-    static unsigned int maxAckPulseDuration ; // micros
+    static unsigned long minAckPulseDuration ; // micros
+    static unsigned long maxAckPulseDuration ; // micros
     static MotorDriver* progDriver;
     static volatile uint8_t numAckGaps;
     static volatile uint8_t numAckSamples;

DCCEXParser.cpp

@@ -2,7 +2,7 @@
  *  © 2022 Paul M Antoine
  *  © 2021 Neil McKechnie
  *  © 2021 Mike S
- *  © 2021 Herb Morton
+ *  © 2021-2024 Herb Morton
  *  © 2020-2023 Harald Barth
  *  © 2020-2021 M Steve Todd
  *  © 2020-2021 Fred Decker
@@ -563,6 +563,7 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
 	    }
 #ifndef DISABLE_PROG
             else if (p[0]=="PROG"_hk) { // <0 PROG>
+          TrackManager::setJoin(false);
 	      TrackManager::progTrackBoosted=false;  // Prog track boost mode will not outlive prog track off
 	      TrackManager::setTrackPower(TRACK_MODE_PROG, POWERMODE::OFF);
             }
@@ -1073,15 +1074,24 @@ bool DCCEXParser::parseC(Print *stream, int16_t params, int16_t p[]) {
 #ifndef DISABLE_PROG
     case "ACK"_hk: // <D ACK ON/OFF> <D ACK [LIMIT|MIN|MAX|RETRY] Value>
 	if (params >= 3) {
+            long duration;
 	    if (p[1] == "LIMIT"_hk) {
 	      DCCACK::setAckLimit(p[2]);
 	      LCD(1, F("Ack Limit=%dmA"), p[2]);       // <D ACK LIMIT 42>
 	    } else if (p[1] == "MIN"_hk) {
-	      DCCACK::setMinAckPulseDuration(p[2]);
-	      LCD(0, F("Ack Min=%uus"), p[2]);  //   <D ACK MIN 1500>
+	      if (params == 4 && p[3] == "MS"_hk)
+		duration = p[2] * 1000L;
+	      else
+		duration = p[2];
+	      DCCACK::setMinAckPulseDuration(duration);
+	      LCD(0, F("Ack Min=%lus"), duration);     // <D ACK MIN 1500>
 	    } else if (p[1] == "MAX"_hk) {
-	      DCCACK::setMaxAckPulseDuration(p[2]);
-	      LCD(0, F("Ack Max=%uus"), p[2]);  //   <D ACK MAX 9000>
+	      if (params == 4 && p[3] == "MS"_hk)      // <D ACK MAX 80 MS>
+		duration = p[2] * 1000L;
+	      else
+		duration = p[2];
+	      DCCACK::setMaxAckPulseDuration(duration);
+	      LCD(0, F("Ack Max=%lus"), duration);     // <D ACK MAX 9000>
 	    } else if (p[1] == "RETRY"_hk) {
 	      if (p[2] >255) p[2]=3;
 	      LCD(0, F("Ack Retry=%d Sum=%d"), p[2], DCCACK::setAckRetry(p[2]));  //   <D ACK RETRY 2>

DCCTimerESP.cpp

@@ -297,7 +297,12 @@ void DCCTimer::DCCEXInrushControlOn(uint8_t pin, int duty, bool inverted) {
 int ADCee::init(uint8_t pin) {
   pinMode(pin, ANALOG);
   adc1_config_width(ADC_WIDTH_BIT_12);
+// Espressif deprecated ADC_ATTEN_DB_11 somewhere between 2.0.9 and 2.0.17
+#ifdef ADC_ATTEN_11db
+  adc1_config_channel_atten(pinToADC1Channel(pin),ADC_ATTEN_11db);
+#else
   adc1_config_channel_atten(pinToADC1Channel(pin),ADC_ATTEN_DB_11);
+#endif
   return adc1_get_raw(pinToADC1Channel(pin));
 }
 int16_t ADCee::ADCmax() {

EXRAIL2.cpp

@@ -716,41 +716,7 @@ void RMFT2::loop2() {
 
   case OPCODE_SETFREQ:
       // Frequency is default 0, or 1, 2,3
-      //if (loco) DCC::setFn(loco,operand,true);
-      switch (operand) {
-        case 0:  // default - all F-s off
-            if (loco) {
-                DCC::setFn(loco,29,false);
-                DCC::setFn(loco,30,false);
-                DCC::setFn(loco,31,false);
-            }
-        break;
-        case 1:
-            if (loco) {
-	      DCC::setFn(loco,29,true);
-              DCC::setFn(loco,30,false);
-              DCC::setFn(loco,31,false);
-            }
-        break;
-        case 2:
-            if (loco) {
-	      DCC::setFn(loco,29,false);
-              DCC::setFn(loco,30,true);
-              DCC::setFn(loco,31,false);
-            }
-        break;
-        case 3:
-            if (loco) {
-	      DCC::setFn(loco,29,false);
-              DCC::setFn(loco,30,false);
-              DCC::setFn(loco,31,true);
-            }
-        break;
-      default:
-	; // do nothing
-	break;
-      }
-
+      DCC::setDCFreq(loco,operand);
       break;
 
   case OPCODE_RESUME:
@@ -1001,6 +967,14 @@ void RMFT2::loop2() {
           StringFormatter::send(LCCSerial,F("<L x%h>"),(uint16_t)operand);
        break; 
   
+  case OPCODE_ACON:  // MERG adapter 
+  case OPCODE_ACOF: 
+      if ((compileFeatures & FEATURE_LCC) && LCCSerial) 
+          StringFormatter::send(LCCSerial,F("<L x%c%h%h>"),
+          opcode==OPCODE_ACON?'0':'1',
+          (uint16_t)operand,getOperand(progCounter,1));
+       break; 
+
   case OPCODE_LCCX: // long form LCC
        if ((compileFeatures & FEATURE_LCC) && LCCSerial)
             StringFormatter::send(LCCSerial,F("<L x%h%h%h%h>\n"),
@@ -1088,6 +1062,8 @@ void RMFT2::loop2() {
   case OPCODE_PINTURNOUT: // Turnout definition ignored at runtime
   case OPCODE_ONCLOSE: // Turnout event catchers ignored here
   case OPCODE_ONLCC:   // LCC event catchers ignored here 
+  case OPCODE_ONACON:   // MERG event catchers ignored here 
+  case OPCODE_ONACOF:   // MERG event catchers ignored here 
   case OPCODE_ONTHROW:
   case OPCODE_ONACTIVATE: // Activate event catchers ignored here
   case OPCODE_ONDEACTIVATE:

EXRAIL2.h

@@ -69,6 +69,8 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,OPCODE_TOGGLE_TURNOUT,
              OPCODE_TTADDPOSITION,OPCODE_DCCTURNTABLE,OPCODE_EXTTTURNTABLE,
              OPCODE_ONROTATE,OPCODE_ROTATE,OPCODE_WAITFORTT,
              OPCODE_LCC,OPCODE_LCCX,OPCODE_ONLCC,
+             OPCODE_ACON, OPCODE_ACOF, 
+             OPCODE_ONACON, OPCODE_ONACOF, 
              OPCODE_ONOVERLOAD,
              OPCODE_ROUTE_ACTIVE,OPCODE_ROUTE_INACTIVE,OPCODE_ROUTE_HIDDEN,
              OPCODE_ROUTE_DISABLED,

EXRAIL2MacroReset.h

@@ -99,6 +99,10 @@
 #undef LCCX 
 #undef LCN 
 #undef MOVETT
+#undef ACON
+#undef ACOF
+#undef ONACON
+#undef ONACOF
 #undef MESSAGE
 #undef ONACTIVATE
 #undef ONACTIVATEL
@@ -265,6 +269,10 @@
 #define LCN(msg) 
 #define MESSAGE(msg)
 #define MOVETT(id,steps,activity)
+#define ACON(eventid)
+#define ACOF(eventid)
+#define ONACON(eventid)
+#define ONACOF(eventid)
 #define ONACTIVATE(addr,subaddr)
 #define ONACTIVATEL(linear)
 #define ONAMBER(signal_id) 

EXRAIL2Parser.cpp

@@ -61,48 +61,86 @@ void RMFT2::ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16
   case 'L':
     // This entire code block is compiled out if LLC macros not used 
     if (!(compileFeatures & FEATURE_LCC)) return;
+    static int lccProgCounter=0;
+    static int lccEventIndex=0;
       
     if (paramCount==0) {  //<L>  LCC adapter introducing self
       LCCSerial=stream;   // now we know where to send events we raise
+      opcode=0;  // flag command as intercepted
 
-      // loop through all possible sent events 
-      for (int progCounter=0;; SKIPOP) {
-        byte opcode=GET_OPCODE;
-        if (opcode==OPCODE_ENDEXRAIL) break;
-        if (opcode==OPCODE_LCC)  StringFormatter::send(stream,F("<LS x%h>\n"),getOperand(progCounter,0));   
-        if (opcode==OPCODE_LCCX) { // long form LCC
+      // loop through all possible sent/waited events 
+      for (int progCounter=lccProgCounter;; SKIPOP) {
+        byte exrailOpcode=GET_OPCODE;
+        switch (exrailOpcode) {
+          case OPCODE_ENDEXRAIL:
+               stream->print(F("<LR>\n")); // ready to roll
+               lccProgCounter=0; // allow a second pass
+               lccEventIndex=0;
+               return;
+
+          case OPCODE_LCC:  
+               StringFormatter::send(stream,F("<LS x%h>\n"),getOperand(progCounter,0));
+               SKIPOP;
+               lccProgCounter=progCounter; 
+               return;
+
+          case OPCODE_LCCX:  // long form LCC
                StringFormatter::send(stream,F("<LS x%h%h%h%h>\n"),
                  getOperand(progCounter,1),
                  getOperand(progCounter,2),
                  getOperand(progCounter,3),
                  getOperand(progCounter,0)
                  );
-        }}
+               SKIPOP;SKIPOP;SKIPOP;SKIPOP;          
+               lccProgCounter=progCounter; 
+               return;
+
+          case OPCODE_ACON:  // CBUS ACON 
+          case OPCODE_ACOF:  // CBUS ACOF 
+                StringFormatter::send(stream,F("<LS x%c%h%h>\n"),
+                  exrailOpcode==OPCODE_ACOF?'1':'0',
+                  getOperand(progCounter,0),getOperand(progCounter,1)); 
+               SKIPOP;SKIPOP;
+               lccProgCounter=progCounter; 
+               return;
       
       // we stream the hex events we wish to listen to
       // and at the same time build the event index looku.
       
-      
-      int eventIndex=0;
-      for (int progCounter=0;; SKIPOP) {
-        byte opcode=GET_OPCODE;
-        if (opcode==OPCODE_ENDEXRAIL) break;
-        if (opcode==OPCODE_ONLCC) {
-           onLCCLookup[eventIndex]=progCounter; // TODO skip...
+        case OPCODE_ONLCC:
            StringFormatter::send(stream,F("<LL %d x%h%h%h:%h>\n"),
-                 eventIndex,
+                 lccEventIndex,
                  getOperand(progCounter,1),
                  getOperand(progCounter,2),
                  getOperand(progCounter,3),
                  getOperand(progCounter,0)
                  );   
-           eventIndex++;      
-        }
-      }
-      StringFormatter::send(stream,F("<LR>\n")); // Ready to rumble
-      opcode=0;
+           SKIPOP;SKIPOP;SKIPOP;SKIPOP;      
+           // start on handler at next      
+           onLCCLookup[lccEventIndex]=progCounter; 
+           lccEventIndex++;        
+           lccProgCounter=progCounter; 
+           return;
+
+        case OPCODE_ONACON:
+        case OPCODE_ONACOF:
+           StringFormatter::send(stream,F("<LL %d x%c%h%h>\n"),
+                 lccEventIndex,
+                 exrailOpcode==OPCODE_ONACOF?'1':'0',
+                 getOperand(progCounter,0),getOperand(progCounter,1)
+                 ); 
+           SKIPOP;SKIPOP;
+           // start on handler at next      
+           onLCCLookup[lccEventIndex]=progCounter; 
+           lccEventIndex++;        
+           lccProgCounter=progCounter; 
+           return;
+           
+         default:
            break;
         }  
+      }
+    }
     if (paramCount==1) {  // <L eventid> LCC event arrived from adapter
         int16_t eventid=p[0];
         bool reject = eventid<0 || eventid>=countLCCLookup;

EXRAILMacros.h

@@ -189,6 +189,14 @@ bool exrailHalSetup() {
 #define LCCX(senderid,eventid) | FEATURE_LCC 
 #undef ONLCC
 #define ONLCC(senderid,eventid) | FEATURE_LCC
+#undef ACON
+#define ACON(eventid) | FEATURE_LCC
+#undef ACOF
+#define ACOF(eventid) | FEATURE_LCC
+#undef ONACON
+#define ONACON(eventid) | FEATURE_LCC
+#undef ONACOF
+#define ONACOF(eventid) | FEATURE_LCC
 #undef ROUTE_ACTIVE
 #define ROUTE_ACTIVE(id) | FEATURE_ROUTESTATE
 #undef ROUTE_INACTIVE
@@ -429,10 +437,14 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
     #include "myAutomation.h"
     0,0,0,0 };
 
-// Pass 9 ONLCC counter and lookup array
+// Pass 9 ONLCC/ ONMERG counter and lookup array
 #include "EXRAIL2MacroReset.h"
 #undef ONLCC
 #define ONLCC(sender,event) +1 
+#undef ONACON
+#define ONACON(event) +1 
+#undef ONACOF
+#define ONACOF(event) +1 
 
 const int RMFT2::countLCCLookup=0
 #include "myAutomation.h"
@@ -529,6 +541,10 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
         OPCODE_PAD,V((((uint64_t)sender)>>32)&0xFFFF),\
         OPCODE_PAD,V((((uint64_t)sender)>>16)&0xFFFF),\
         OPCODE_PAD,V((((uint64_t)sender)>>0)&0xFFFF),  
+#define ACON(eventid) OPCODE_ACON,V(((uint32_t)eventid >>16) & 0xFFFF),OPCODE_PAD,V(eventid & 0xFFFF),
+#define ACOF(eventid) OPCODE_ACOF,V(((uint32_t)eventid >>16) & 0xFFFF),OPCODE_PAD,V(eventid & 0xFFFF),
+#define ONACON(eventid) OPCODE_ONACON,V((uint32_t)(eventid) >>16),OPCODE_PAD,V(eventid & 0xFFFF),
+#define ONACOF(eventid) OPCODE_ONACOF,V((uint32_t)(eventid) >>16),OPCODE_PAD,V(eventid & 0xFFFF),
 #define LCD(id,msg) PRINT(msg)
 #define SCREEN(display,id,msg) PRINT(msg)
 #define STEALTH(code...) PRINT(dummy)

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202406021945Z"
+#define GITHUB_SHA "devel-202406182019Z"

KeywordHasher.h

@@ -26,7 +26,7 @@
  Thus  "MAIN"_hk  generates exactly the same run time vakue 
  as   const int16_t HASH_KEYWORD_MAIN=11339  
 */
-#ifndef KeywordHAsher_h
+#ifndef KeywordHasher_h
 #define KeywordHasher_h
 
 #include <Arduino.h>

MotorDrivers.h

@@ -97,6 +97,18 @@
  new MotorDriver(25/* 3*/, 19/*12*/, UNUSED_PIN, 13/*9*/, 35/*A2*/, 1.27, 5000, 36 /*A4*/), \
  new MotorDriver(23/*11*/, 18/*13*/, UNUSED_PIN, 12/*8*/, 34/*A3*/, 1.27, 5000, 39 /*A5*/)
 
+// EX-CSB1 with integrated motor driver definition
+#define EXCSB1 F("EXCSB1"),\
+ new MotorDriver(25,  0, UNUSED_PIN, -14, 34, 2.23, 5000, 19), \
+ new MotorDriver(27, 15, UNUSED_PIN,  -2, 35, 2.23, 5000, 23)
+
+// EX-CSB1 with EX-8874 stacked on top for 4 outputs
+#define EXCSB1_WITH_EX8874 F("EXCSB1_WITH_EX8874"),\
+ new MotorDriver(25,  0, UNUSED_PIN, -14, 34, 2.23, 5000, 19), \
+ new MotorDriver(27, 15, UNUSED_PIN,  -2, 35, 2.23, 5000, 23), \
+ new MotorDriver(26,  5, UNUSED_PIN,  13, 36, 1.52, 5000, 18), \
+ new MotorDriver(16,  4, UNUSED_PIN,  12, 39, 1.52, 5000, 17)
+
 #else
 // STANDARD shield on any Arduino Uno or Mega compatible with the original specification.
 #define STANDARD_MOTOR_SHIELD F("STANDARD_MOTOR_SHIELD"),                                                 \

WifiESP32.cpp

@@ -147,6 +147,12 @@ bool WifiESP::setup(const char *SSid,
   //  enableCoreWDT(1);
   //  disableCoreWDT(0);
 
+#ifdef WIFI_LED
+  // Turn off Wifi LED
+  pinMode(WIFI_LED, OUTPUT);
+  digitalWrite(WIFI_LED, 0);
+#endif
+
   // clean start
   WiFi.mode(WIFI_STA);
   WiFi.disconnect(true);
@@ -247,6 +253,13 @@ bool WifiESP::setup(const char *SSid,
     // no idea to go on
     return false;
   }
+#ifdef WIFI_LED
+  else{
+    // Turn on Wifi connected LED
+    digitalWrite(WIFI_LED, 1);
+  }
+#endif
+
 
   // Now Wifi is up, register the mDNS service
   if(!MDNS.begin(hostname)) {

config.example.h

@@ -307,11 +307,21 @@ The configuration file for DCC-EX Command Station
 //
 //#define SERIAL_BT_COMMANDS
 
-// BOOSTER PIN INPUT ON ESP32
+// BOOSTER PIN INPUT ON ESP32 CS
 // On ESP32 you have the possibility to define a pin as booster input
-// Arduio pin D2 is GPIO 26 on ESPDuino32
 //
+// Arduino pin D2 is GPIO 26 is Booster Input on ESPDuino32
 //#define BOOSTER_INPUT 26
+//
+// GPIO 32 is Booster Input on EX-CSB1
+//#define BOOSTER_INPUT 32
+
+// ESP32 LED Wifi Indicator
+// GPIO 2 on ESPduino32
+//#define WIFI_LED 2
+//
+// GPIO 33 on EX-CSB1
+//#define WIFI_LED 33
 
 // SABERTOOTH
 //

version.h

@@ -3,7 +3,16 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.60"
+#define VERSION "5.2.65"
+// 5.2.65 - Speedup Exrail SETFREQ 
+// 5.2.64 - Bugfix: <0 PROG> updated to undo JOIN 
+// 5.2.63 - Implement WIFI_LED for ESP32, ESPduino32 and EX-CSB1, that is turned on when STA mode connects or AP mode is up
+//        - Add BOOSTER_INPUT definitions for ESPduino32 and EX-CSB1 to config.example.h
+//        - Add WIFI_LED definitions for ESPduino32 and EX-CSB1 to config.example.h
+// 5.2.62 - Allow acks way longer than standard
+// 5.2.61 - Merg CBUS  ACON/ACOF/ONACON/ONACOF Adapter interface.
+//        - LCC Adapter interface throttled startup,
+//          (Breaking change woith Adapter base code)
 // 5.2.60 - Bugfix: Opcode AFTEROVERLOAD does not have an argument that is a pin and needs to be initialized
 //        - Remove inrush throttle after half good time so that we go to mode overload if problem persists
 // 5.2.59 - STM32 bugfix correct Serial1 definition for Nucleo-F401RE